Setup guide

ATS-2020 Quick Start Guide

Supplied items

Before assembling and connecting, make sure you have received all of the following items.

If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.

Placement

Place the sound bar in front of or below your TV, either with or

without a stand, at least 2'' away from your TV.

Place the subwoofer to the outside of the sound bar. To avoid

echoes from the wall, face the front side of the subwoofer

slightly inward.

The sound bar may also be mounted on a wall, using the

included mounting template and commercially available

screws. Refer to the Owner’s Manual for additional mounting

instructions.

NOTE

•

Be careful not to stack the sound bar/subwoofer with any other components,

as vibration may cause system disruption in other components.

Sound bar (ATS-CU2020) Mounting template

(Use when attaching the sound bar to a wall.)

Remote control Two AAA batteries

(Install the batteries in

the remote control.)

Optical cable

1.5 m (4.9 ft)

RCA stereo cable

1.5 m (4.9 ft)

Screw × 2

(For attaching

the stand)

Continued to the reverse side

Owner’s Manual

Wireless subwoofer

(NS-WSW41)

Stand × 2

(For sound bar)

Quick Start Guide

(This sheet)

PAGE 1
U ATS-2020 Quick Start Guide Supplied items Before assembling and connecting, make sure you have received all of the following items. If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday. Sound bar (ATS-CU2020) Mounting template (Use when attaching the sound bar to a wall.) Wireless subwoofer (NS-WSW41) Remote control Two AAA batteries (Install the batteries in the remote control.) Optical cable 1.5 m (4.9 ft) RCA stereo cable 1.5 m (4.
PAGE 2
Watching TV Connections 1. Connect the TV and sound bar with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. 3. 4. For details, refer to the Owner’s Manual. Turn on the TV and set the volume to minimum. 1. Press Disable the TV speakers using the TV’s audio settings menu (if available). 2. Press the TV key to select TV as the input source. HINT 2. Connect the power cable of the sound bar and subwoofer to AC wall outlets.