CAUTION RISKOF ELECTRIC SHOCKDONOT OPEN CAUTION: TO REDUCE ELECTRIC SHOCK, THE RISK OF TO QUALIFIED PERSONNEL. Read these instructions. 2 Keep these instructions. 3 4 Heed all warnings. Follow all instructions. 5 6 Do not else this apparatus 7 Do not block any ventilation openings, lnstall in accordance with the mannlacmrer's instructious. Clean only with near any heat heat registers, stoves, that produce grounding=type plug.
FCC INFORMATION 1 IMPORTANT UNIT! NOTICE: (for US customers) DO NOT MODIFY THIS 4 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void ynur authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessnries and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
1 To assure carefully. the finest perlormance, Keep it in a sale place 2 Install this unit in a well vemilated, cool, - away from direct sunlight, heat sources, moisture, following please read this manual for future reli_rence. and/or cold. For proper minimum clearances. dry, clean vibration, ventilation, place dust, allow the Top: 5 crn (2 in) Rear: 5 cm (2 in) Sides: 1 cm (3/8 in) 3 Locate 4 motors, or translormers to avoid humming sounds.
Supplied items ............................................ Front panel ................................................. Placing ........................................................ Connection ................................................. Operation .................................................... 2 2 3 4 6 Enjoying sound with your preference ......... 7 Additional Information ................................ 8 Operation indicators of the unit ................ 11 Troubleshooting ..............
Before assembly and connecting, make sure you have received all of the following items. Main unit x 1 Optical cable x 1 (1.5 m (4.9 ft)) Battery x 2 (AAA, R03, ua4) Remote control x 1 [__ _ ^ Mounting iNPUT I [] template SURROUND D CLEAR VOICE [] x 1 Spacer x 2 (for attaching to a wall) URIVOLUME DTS D DrlD D D[IPL_ [] L f @ Indicators iNPUT @ TV remote Light up to show the system condition.(_;, P.
Installation: Example illustrated examples 1 1 Example 2 Attach the supplied mounting template on a wall and mark the holes of the Example 3 mounting template. Tapes or thum tac's k / Example Example 1: Unit beneath 2: Unit without TV stand beneath Example 3: Wall mounting TV (_ P. 9) 2 Remove the mounting template and then install the commercially available screws and the supplied spacers at the marks. Ir#6Ig-N • Do not place the unit on/under as BD player in a pile.
• • Do not connect the power cable until all connections are completed. Do not use excessive force when inserting the cable plug. Doing so may damage and/or terminal. the cable plug The unit plays the audio output from your TV. Connect input compouents such as a BD player, etc., to your TV first and check the compouents connecting to the unit. See the manuals of your TV and BD player, etc., for details. After that, connect the unit to your TV as the illustration play properly before below.
_lflf_qlf['ll \1/ --'@'--Alternative connections Connect the input componcnts (BD player, STB, etc) to the unit directly in the folloxxAng cases. • When the unit does not play the sound output from the components connected to your TV (_, P. 4). • When your TV does not have any audio input jacks to connect Refer to "Using an external of the unit. * ff connecting ofl' switching subwoofcr" (_ input components, such as a BD player, etc. P.
Once you have l'inished all cable connections playback and remole control operation, l'ollow the procedure below to start basic Ol')eration. Installing the batteries Before installing batteries or using the remote control, make sure that you read precautions on the remote control and batteries in "Notes on the remote control and batteries" (_* P. 1). Operation range Use Ihe remote control and point it toward @ @ (Power): standby Turns on the unit, or sets it to mode.
\1/ -'c_'-When you play back a BD player 1 2 jack Turn your TV on. Press the TV button to switch the input of the unit to "TV." The unit plays the TV sound, iNPUT The INPUT _m= indicator lights up in green. 1 2 ,=7," 3 Switch the input components of your such 3 input unit. the video video source Press the BD/DVD switch the input Start such as to the audio input such of your TV to the as a BD player. or STB of the button to unit.
l_2r_[_[_[ol#Dlll_[oldlnDI¢[oli Press VOLUME level. You can use 1his function +/- to adjust the volume with a lagging [] [] 1 [1110 DTS SURROUND CLEARV01CE UNJVOLUNE [] [] to delay sOUnLIto synchronize video image. Press and more than hold AUDIO DELAY 3 seconds adjustment to enter D[LAY mode. Up ....... D[10 _" Down The color of FII'ID DTS inclicator changes depending on the adjustable range.
2 TV remote control operation may be difficult if the unit The unit is turned on when switching hides the sensor of your TV when beneath or under the TV. Try the two solutions below and see whether this control relay l'unction on/off. The CLEAR VOICE indicator solves the problem. Move @ the unit @ Remove the unit. following illustration. (_, P. 11 ) in all directions.
3 Press the button below of the main unit to select the operation learn. you want the unit to • The unit will automatically in the remote minutes _nt _ _n,tto Volume Volume Power down VOLUME up VOLUME on/standby • m;ngi control without set to standby learning mode any operation If learning fails, try again that screen glare may being with disturb mode is left turned if the trait on for 5 perlormed. your TV turned TV remote control off. Note learning.
iNPUT SURROUND CLEARVOICE URIVOLUME [] [] Tile six indicators [_: Lights Playback subwoofer Built-in s/I bvqoo ...... Lights _: after turning DD PL_ [] [] [] are placed in tile abo;e up in gr hmnediately [] DDD DTS order, and their colorand alpeal-ance up in l-_.'d Lights on the unit, the indicators of the (=:, P. 8) TV remote function [-7: control relay (=:, P.
Refer to the chart below or if the instruction contact the nearest should the unit not function properly. If' the problem you are experiencing 1 The AC power supply cable of the unit, TV and external the AC wall outlet. components (such as BD player) 2 The power supply of' the unit, TV and the external components (such as BD player) 3 All cables are firmly connected to their respective jacks on each component.
_'lmfl_ff¢ The volume, audio delay adjustable. subwoofer time is not The unit does operation control. and not learn the of TV remote The a@lstment millimuln. has reached the n/axinmm or The remote control sensor of the unit may be exposed to direct sunlight or lighting. Reposition The scl_en glare of TV disturbs control signah Disconnect the power cable and pertbrm the remote coiitrol learrling operation again. The batteries out. the remote of TV remote control may be worn the unit.
Amplifier section Input • Minimum RMS Output Power Front Left and Right (1 kHz. l(/_ THD. 6 _2) ....................................................................... 24W+24W Snbwooler (10I) Hz. l(/, THD. 3 _2) ........................... • Maximum Power Speaker (100 Hz. I(F/_ THD. 3 £2) ......................... 2 (TV,BD/DVD) • Coaxial ................................................................... Output 48 W Front Left and Right (1 kHz. 1(t% THD. 6 g2) ......................................
@YAMAHA YAMAHA CORPORATION © 2011 Yamaha Corporation Printed in Malaysia ZA81330