User Manual

ManualsBrandsYamaha ManualsInterfacesAD/DA

Technical Data Sheet

1 / 4

AD/DA Card MY8-ADDA96

Overview

The Yamaha MY8-ADDA96 is an optional analog-to-digital input and

digital-to-analog output card for compatible Yamaha digital mixing

consoles and signal processors. It have eight analog inputs and eight

analog outputs available via eight Euro block connectors.

Features

• 24bit resolution, 96kHz compatible 8-in/8-out analog audio interface

• EuroBlock connectors

• Max input/output level before clip: +24dBu

• Dimensions: 120mm x 40mm x 176mm (4.7" x 1.6" x 6.9")

Summary of content (4 pages)

PAGE 1
AD/DA Card MY8 -ADDA96 Overview The Yamaha MY8-ADDA96 is an optional analog-to-digital input and digital-to-analog output card for compatible Yamaha digital mixing consoles and signal processors. It have eight analog inputs and eight analog outputs available via eight Euro block connectors. Features • 24bit resolution, 96kHz compatible 8-in/8-out analog audio interface • EuroBlock connectors • Max input/output level before clip: +24dBu • Dimensions: 120mm x 40mm x 176mm (4.7" x 1.6" x 6.
PAGE 2
AD/DA Card MY8 -ADDA96 Specifications General Specifications Channel Count 96kHz compatible 8IN / 8OUT Format Analog Resolution 24bit Connector EuroBlock connectors (balanced) Analog Input Characteristics Input Terminals Actual Load Impedance For Use with Nominal Input Level Max. before Clip Connector In 1-8 10kΩ 600Ω Lines +24dBu (12.28V) Euroblock (balanced) *1. In these specifications, when dBu represents are specific voltage, 0 dBu is referenced to 0.775 Vrms. *2.
PAGE 3
AD/DA Card MY8 -ADDA96 Dimensions Unit: mm (inch) 164.1 (6.5) 22.6 (0.9) 120 (4.7) 22.6 (0.9) 12 (0.5) 40 (1.
PAGE 4
AD/DA Card MY8 -ADDA96 Architectural and Engineering Specifications The Yamaha MY8-ADDA96 shall be an optional analog-to-digital input and digital-to-analog output card for compatible Yamaha digital mixing consoles and signal processors. It shall have eight analog inputs and eight analog outputs available via eight Euro block connectors. Dimensions shall be 120 (W) x 40 (H) x 176 (D) mm. *All information subject to change without notice.