User Manual

Firmware Installation Procedure

Notice: Do not turn off the power of the instrument or remove the USB memory during this operation.

Download the firmware

1) Download the Zip file to the computer.

2) Connect the USB memory to your computer.

3) Extract the *.prg files included in the Zip file and copy them to the root directory of your USB

memory.

Connect the USB memory to the instrument

Connect the USB memory containing the downloaded files into the USB TO DEVICE terminal of the

instrument.

Notice: Make sure that the USB memory is properly connected to the terminal.

Excessive force or incorrect insertion may damage the terminal.

Install the firmware

Hold down the STYLE CONTROL [START/STOP] button on the panel and turn the power on

simultaneously.

Keep holding down the [START/STOP] button until the following message appears:

When the following message appears after a few moments, press the [START/STOP] button.

Press the [START/STOP] button again to start installation. A progress bar for installation

will appear.

PAGE 1
Firmware Installation Procedure Notice: Do not turn off the power of the instrument or remove the USB memory during this operation. 1 Download the firmware 1) Download the Zip file to the computer. 2) Connect the USB memory to your computer. 3) Extract the *.prg files included in the Zip file and copy them to the root directory of your USB memory. 2 Connect the USB memory to the instrument Connect the USB memory containing the downloaded files into the USB TO DEVICE terminal of the instrument.
PAGE 2
When installation is complete, the following message appears with the new firmware version. Press the power button on the instrument to turn it off and remove the USB memory from the instrument. Confirm the version number CVP-609/605 1) Turn the instrument on and wait until the Home display appears. 2) Touch the [Menu] icon, and then touch the right-arrow icon to move the second Menu page. 3) Touch the [Utility] icon and touch the [System] tab. 4) Check that the version number is correct for the upgrade.