Owner's Manual

ManualsBrandsYamaha ManualsDigital MixersYamaha 01V96i

Using 01V96i Editor

Windows

Getting Started WindowsKeyboard ShortcutsIndex

01V96i Editor—Owner’s Manual

Special Notices

• The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this man-

ual in whole or in part by any means is expressly for-

bidden without the written consent of the

manufacturer.

• Copying of the commercially available music

sequence data and/or digital audio files is strictly pro-

hibited except for your personal use.

• Yamaha makes no representations or warranties with

regard to the use of the software and documentation

and cannot be held responsible for the results of the

use of this manual and the software.

• The screen displays as illustrated in this owner’s man-

ual are for instructional purposes, and may appear

somewhat different from the screens which appear on

your computer.

• Future upgrades of application and system software

and any changes in specifications and functions will

be announced separately.

• The company names and product names in this

Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started .......................................... 2

Overview of 01V96i Editor .................................... 2

Configuring 01V96i Editor .................................... 2

Synchronizing 01V96i Editor ................................ 4

Offline Edit Function .............................................. 4

Working with Sessions ........................................... 4

Undo/Redo Function .............................................. 5

Other Functions ...................................................... 6

Using 01V96i Editor Windows ................... 7

Master Window ....................................................... 7

Layer Windows ........................................................ 8

Selected Channel Window ................................... 14

Library Window .................................................... 21

Patch Editor Window ........................................... 23

Surround Editor Window .................................... 28

Effect Editor Window ........................................... 29

Meter Window ...................................................... 31

Keyboard Shortcuts ................................. 32

Index ........................................................ 33

* Specifications and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp.

reserves the right to change or modify products or

specifications at any time without prior notice. Since

specifications, equipment or options may not be the

same in every locale, please check with your Yamaha

dealer.

01V96i Editor

Owner’s Manual

Description of menus and buttons

In the event that menu and button names on a Windows system are different from those on a Macintosh, this manual

uses the Windows menu and button names followed by the Macintosh menu and button names in parentheses.

Summary of content (34 pages)

PAGE 1
• The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.
PAGE 2
Overview of 01V96i Editor 1 01V96i Editor enables you to remotely control the Yamaha 01V96i mixing console and to save the parameter settings on your computer. To use 01V96i Editor, you must first perform the following operations: Start and configure Studio Manager. 2 Start and configure 01V96i Editor. 3 Synchronize 01V96i Editor with your 01V96i console (see page 4). For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.
PAGE 3
Getting Started Keyboard Shortcuts  Console Setup UsingWindows 01V96 Editor Windows Channel Select: These options determine whether or not channel selection is linked. When the PC->Console option is on, selecting a channel in 01V96i Editor selects the same channel on the console. When the Console->PC option is on, selecting a channel on the console selects the same channel in 01V96i Editor.
PAGE 4
2 Select whether you want to transfer your settings to 01V96i Editor, or vice versa. At this time, the All Libs option determines whether or not Scene and Library data is synchronized. PC -> Console: Transfers the current parameter settings in 01V96i Editor to your console. Console -> PC: Transfers the current parameter settings of your console to the 01V96i Editor. 3 Click [OK]. Do not operate the console while synchronization is in progress.
PAGE 5
Undo Choose [Undo] from the [Edit] menu. Redo Choose [Redo] from the [Edit] menu. Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo any previous operation: • Operations on the console • Closing Studio Manager • Changing Surround mode (Stereo/3-1/5.1/6.
PAGE 6
You can copy and paste the channel parameters. In the Console Setup window (page 3), you can also specify the parameters to be copied. The following table describes how to use the Copy & Paste function. Copying a channel Right-click (+click) a copy source channel, then choose [Copy]. Pasting a channel Right-click (+click) the copy destination channel, then choose [Paste].
PAGE 7
Getting Started Using 01V96i Editor Windows Master Window Note: If 01V96i Editor is not connected or is not communicating with the 01V96i, clicking this button will not switch the unit from offline to online. This indicator is displayed when 01V96i Editor is connected to the 01V96i correctly. If the connection is correct, the 01V96i Editor parameters will work in unison with the 01V96i parameters.
PAGE 8
 Input Channels Selecting the 1-16 or 17-32 button in the Master window displays the corresponding Input Channel strips. SOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. Routing buttons These buttons are used to route the Input Channel to the Bus Outs. [STEREO] button This button is used to route the Input Channel’s signal to the Stereo Out.
PAGE 9
Channel number This is the channel number. Double-click the channel number to open the Selected Channel window. On or off but no level set Dark blue bar Off, pre-fader Green bar outline displays level On, pre-fader Green bar displays level Off, post-fader Orange bar outline displays level On, post-fader Orange bar displays level Pan/Aux Send display This display shows the stereo or surround pan position or, while setting an Aux Send, the Aux Send level in dB.
PAGE 10
SOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. Routing buttons These buttons are used to route the Input Channel to the Bus Outs. PHASE button This button is used to reverse the signal phase of the channel. EQ button This button is used to turn on and off the Input Channel’s EQ. EQ curve This display shows the Equalizer’s curve, which can be set by dragging. Channel number This is the channel number.
PAGE 11
Short channel name This is the channel’s short name. To edit the name, click it and type. Channel fader/Channel meter This is the Input Channel’s fader. The meter at the right of the fader indicates the signal level. Index Keyboard Shortcuts Fader value This indicates the dB value of the fader. Getting Started ON button This button turns the Input Channel on and off. It appears orange while the channel is on. UsingWindows 01V96 Editor Windows SOLO button This button solos the Input Channel.
PAGE 12
When you select the Master LAYER button in the Master window, the Bus Out and Aux Send channels are displayed. The Aux Send channel appears the same as the Bus Out channels except that the Bus Out channels feature a [STEREO] button. [STEREO] button (Bus Out only) This button is used to route the Bus Out to the Stereo Out. Getting Started  Output Channels [INSERT] button This button is used to turn on and off the Bus Out’s Insert.
PAGE 13
When you select the REMOTE LAYER button in the Master window, Remote Channels are displayed. Channel number This is the channel number. Double-click the channel number to open the Selected Channel window. Getting Started  Remote Channels Remote target name This name indicates the remote target assigned on the 01V96i. Channel fader This is the Bus Out’s fader.
PAGE 14
Keyboard Shortcuts Note: You can open multiple Selected Channel windows by choosing [Windows] menu -> [Selected Channel] -> [Additional View]. The titles of these windows will indicate [Locked]. You cannot open Library windows from windows that are indicated as [Locked].
PAGE 15
AUX SEND section This section contains the Aux Send controls for the currently selected Input Channel. Use the rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button below each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to turn Aux Sends on and off (the level is fixed at nominal).
PAGE 16
PHASE section This section contains the phase control for the currently selected Stereo Input Channel. The PHASE button reverses the channel’s signal phase. EQUALIZER section This section contains the EQ controls and display graph for the currently selected Stereo Input Channel. The rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ attenuation level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The ON button turns the EQ on and off.
PAGE 17
CHANNEL SELECT section Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by clicking the left and right Channel Select buttons. The long channel name is displayed below the Channel ID. The [LIBRARY] button opens the Channel Library window. EQUALIZER section This section contains the EQ controls and display graph for the currently selected Bus Out. It’s layout is identical to the EQUALIZER section for Input Channels.
PAGE 18
UsingWindows 01V96 Editor Windows PAIR, FADER GROUP & MUTE GROUP section This section contains the Pair, Fader and Mute group functions for the currently selected Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. Use the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE GROUP buttons to add it to Mute groups. Getting Started COMPRESSOR section This section contains the Compressor controls and display graph for the currently selected Bus Out.
PAGE 19
UsingWindows 01V96 Editor Windows PAIR, FADER GROUP & MUTE GROUP section This section contains the Pair, Fader and Mute group functions for the currently selected Aux Send. Click the heart icon to pair and unpair the channel with its partner channel. Use the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE GROUP buttons to add it to Mute groups. Getting Started COMPRESSOR section This section contains the Compressor controls and display graph for the currently selected Aux Send.
PAGE 20
Index Keyboard Shortcuts UsingWindows 01V96 Editor Windows FADER GROUP & MUTE GROUP section This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute groups. Getting Started COMPRESSOR section This section contains the Compressor controls and display graph for the currently selected Stereo Out.
PAGE 21
The Library window enables you to control and manage Scenes and libraries. In addition, Scenes and libraries can be saved to disk on your computer as Library files. To open the Library window, choose [Library] from the [Windows] menu. The Library window consists of 8 display pages.
PAGE 22
[SAVE] button This button is used to save the currently open Library file. [SAVE AS] button This button is used to save the currently open Library file with a different name. TITLE This column displays the memory titles. PROTECT (only for Scene memories) This column displays padlock icons for protected memories. It also displays an “ ” (read-only) icon for preset data. INPUT PATCH LINK (only for Scene memories) This column displays the input patch memory numbers linked to the Scene library.
PAGE 23
The Patch Editor window is used to patch Inputs, Outputs, Inserts, Effects, and Direct Outs. To open this window, choose [Patch Editor] from the [Windows] menu. This window consists of five pages, which you can select by clicking the tabs along the top of the window. Index Keyboard Shortcuts UsingWindows 01V96 Editor Windows  INPUT PATCH Page Getting Started Patch Editor Window Channel IDs These are the Channel IDs. Long channel names These are the Channel long names.
PAGE 24
Keyboard Shortcuts UsingWindows 01V96 Editor Windows Getting Started  OUTPUT PATCH Page Channel IDs These are the Channel IDs. Index Long channel names These are the Channel long names. To edit a name, click it and type. [AUTO SETUP] button Clicking this button sets the patches on this page to their initial values. [ALL CLEAR] button This button clears all patches on this page. [LIBRARY] button This button opens the Output Patch Library window. Port names These are the Port names.
PAGE 25
Keyboard Shortcuts UsingWindows 01V96 Editor Windows Getting Started  INSERT PATCH Page Index Channel IDs These are the Channel IDs. Long channel names These are the Channel long names. To edit a name, click it and type. [LIBRARY] buttons These buttons open the Input and Output Patch Library windows. Port names These are the Port names. Insert Out Patchbay This patchbay is used to patch output ports to the Insert Outs of Input Channels, Bus Outs, Aux Sends, and the Stereo Out.
PAGE 26
Keyboard Shortcuts UsingWindows 01V96 Editor Windows Getting Started  EFFECT PATCH Page Effects processor 1–4 section This section indicates the effects name assigned to internal Effects processor 1–4. The parameters in this section are used to select inputs and outputs for Effects processor 1–4. Index [LIBRARY] button This button opens the Input Patch Library window.
PAGE 27
Keyboard Shortcuts UsingWindows 01V96 Editor Windows Getting Started  DIRECT OUT PATCH Page Channel IDs These are the Channel IDs. Index Long channel names These are the Channel long names. To edit a name, click it and type. [LIBRARY] button This button opens the Output Patch Library window. Port names These are the Port names. Patchbay The patchbay is used to patch output ports to the Direct Outs. Active patches are indicated by a red dot. To make a patch, click a square.
PAGE 28
Surround pan graph The green dot on this graph indicates the surround pan position for the currently selected Input Channel. The surround pan can be set by dragging the dot. Clicking a speaker icon will move the pan position to the position of that icon. Surround pan position This is the current surround pan position. SURROUND MODE parameter Click this parameter to display the option list and set Surround mode to STEREO, 3-1, 5.1, or 6.1. [LFE] control This rotary control sets the level of the LFE channel.
PAGE 29
The Effect Editor window enables you to edit the internal effects processors. To open the Effect Editor window, choose [Effect Editor] from the [Windows] menu. Keyboard Shortcuts UsingWindows 01V96 Editor Windows Note: You can open multiple Effect Editor windows by choosing [Windows] menu -> [Effect Editor] and making a choice other than [Generic Editor]. The titles of these windows will indicate [Locked]. You cannot open Library windows from windows that are indicated as [Locked].
PAGE 30
Getting Started PLAY/REC section This is shown only if the selected effect type is FREEZE. To start recording (sampling), click the [REC] button and then click the [PLAY] button. The progress bar shows the current recording location. To play back the recorded sample, click the [PLAY] button. UsingWindows 01V96 Editor Windows TEMPO section This is shown only if the selected effect type includes a TEMPO parameter. You can turn the rotary knob to set the TEMPO parameter directly.
PAGE 31
The Meter window displays the Input, Output, Effect, and Stereo Out meters. To open the Meter window, choose [Meter] from the [Windows] menu. This window consists of four display pages. You can access these pages by clicking the tabs along the top of the window. Page This page displays the Input Channel CH1-32 meters (12 segments). ST IN page This page displays the Stereo Input Channel 1-4 meters (12 segments) MASTER page This page displays the Bus 1-8, Aux 1-8, and Stereo meters (12 segments).
PAGE 32
Windows Creates a new Session Ctrl+N +N Opens a previously saved Session Ctrl+O +O Saves the current Session Ctrl+S +S Undo Ctrl+Z +Z Redo Ctrl+Y +Y Closes the active window Ctrl+W +W Closes all windows Ctrl+Alt+W +Option+W Opens the Master window Ctrl+1 +1 Opens the Layer window Ctrl+2 +2 Opens the Selected Channel window Ctrl+3 +3 Opens the Library window Ctrl+4 +4 Opens the Patch Editor window Ctrl+5 +5 Opens the Surround Editor window Ctrl+6 +6 Opens the Effect Ed
PAGE 33
A ALL CLEAR button ................. 23, 24 AUTO SETUP button ............. 23, 24 AUX section .....................................10 Aux Section ........................................9 Aux Send level section ....................18 AUX SEND section ................. 15, 16 Aux Sends .........................................18 B Balance & level section ...................19 Bus Outs ...........................................17 BYPASS button ...............................29 C CH1-32 page ..............
PAGE 34
R RECALL button ..............................22 Redo ....................................................5 Remote Channels ............................13 Remote target name ........................13 Resynchronizing 01V96i Editor .....4 ROUTING buttons .............. 8, 10, 16 ROUTING section ..........................15 S SAVE AS button .............................22 SAVE button ....................................22 Saving the current Session ...............