User Manual

ManualsBrandsYamaha ManualsMusical Instrument01V96

01V96i Upgrade Guide

Upgrade Guide

This document explains how to upgrade the 01V96i system software to the latest version.

 Precautions (please be sure to read these precautions)

• The user assumes full responsibility for the upgrade.

• Back up important data before upgrading.

• If you fail to follow these instructions properly, or turn off the 01V96i or disconnect the

USB cable while the upgrade is in progress, the 01V96i may be damaged.

• This software is for upgrading the 01V96i system software from a computer via USB.

MIDI drivers other than the Yamaha Steinberg USB driver cannot be used.

• If the upgrade fails while the new system software is being transferred to the 01V96i

due the power being turned off, the USB cable disconnected, etc., when the 01V96i is

turned back on again it will startup in download mode, not normal mode. In this case

you should reconnect the cable and perform the upgrade again.

• If the 01V96i does not work properly after upgrading, and you’ve tried upgrading

several times, please contact your Yamaha dealer.

• This software and its documentation is copyright Yamaha Corporation.

• Reproducing or modifying all or part of this software or its documentation without

permission is strictly prohibited.

• The screen shots in this guide are for use with this upgrade procedure only and may

be different to the actual screen shots.

• Windows is a registered trademark of Microsoft Corporation.

• Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other

countries.

• All other trademarks are the property of their respective holders and are hereby

acknowledged.

Summary of content (5 pages)

PAGE 1
Upgrade Guide This document explains how to upgrade the 01V96i system software to the latest version.  Precautions (please be sure to read these precautions) • The user assumes full responsibility for the upgrade. • Back up important data before upgrading. • If you fail to follow these instructions properly, or turn off the 01V96i or disconnect the USB cable while the upgrade is in progress, the 01V96i may be damaged. • This software is for upgrading the 01V96i system software from a computer via USB.
PAGE 2
Contents of the folder  Windows DMUpgrade.exe System software installer Other files Other files are necessary for installer. (Keep all files on the folder.)  Mac DMUpgrade System software installer Other files Other files are necessary for installer. (Keep all files on the folder.) Upgrading the System Software 1. Start the Computer and check to see if the following steps are complete.
PAGE 3
. Double-click “DMUpgrade.exe” ( or DMUpgrade for Mac OS). The installer window opens. 4. Click [Next]. The following I/O port setting window opens. 5. Make sure that “Yamaha 01V96i-1” is selected for the Input port and that ”Yamaha 01V96i-1” is selected for the Output port, then click [Next]. A window indicating the installation progress opens, and the system software is installed. The installation process takes a few minutes.
PAGE 4
6. When the installation is complete, the following window opens and the 01V96i reboots itself in normal mode.
PAGE 5
Error Message List ･ Unable to connect to the console. ・Make sure that the power to the 01V96i is turned on and that the 01V96i and the computer are connected via the USB cable. ・If the 01V96i is in normal operation mode, press and hold down the [CLEAR] button and turn on the power to the console to place it in Flash Update mode. ・Make sure the Yamaha Steinberg USB Driver is installed correctly. If the error persists, turn off and on the power to the console and restart the installer.