RISK OF ELECTRIC SHOCK| DG NOT GEM CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER {OR BAG. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. © Explanation of Graphical Symbols The lightning fish with arrowhead symbol, within an equilateral triangle, ] is intended 1o alert you to the presence of insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude 1o constitute a risk of electric shack to persons.
1 To ensue the finest performance, please read this manual carefully, Keep it in a safe place for future reference. 2 Install your unit in & cool, dry, clean place away from windows, heat sources, and oo much vibration, dust, moisture or cold. Avoid sources of hum {transformers, motors), To prevent fire or electrical shock, do not expose o rain and water. 3 Do not operate the unit upside-down. It may overall, possibly causing damage. 4 Never open the cabinet.
SETTING THE TRANSPORTATION LEVER in order to protect the unit from the vibration and shocks during transportation, the internal laser pickup mechanism-is held in place with the transportation lever located on the bottom of the unit. Be sure to set the transportation lever before connection. 1. As shown in the figure, spread out a soft cloth, ete. and gently stand the unit on its side, taking care not o scratch the finish. 2. Side the lever in the direction of the arrow.
#® Your unit has been specifically designed for the reproduction of compact discs bearing the "gEE" mark. No other discs should be loaded into the player. ® To remove the disc from its storage case, press down on the center of the opened case and it the disc out carefully holding it by the edges. @ Although compact discs are impervious to wear during play, damage 1o the surface of a disc through improper handling wil result in play regularities.
€ Disc tray Place a disc on the tray with its label surface upwards & Numeric buttons (+10, 1 0} These buttons are used to designate the frack nurturer or index number for selecting the tunes or program play. € Display window (D DISC indicator Lights when a disc is loaded. @ TRACK display Shows the frack number of the selection.. @ INDEX display During play, the display shows the index number of the selection being played. If the disc does not contain index number, the INDEX display remains 01.
LI CD B OPEN/CLOSE button Press this button to foreclose the disc tray. ® PROGRAM operation buttons These buttons are used when playing the required tunes in the desired order or skipping the undesired tunes. DELETE: Used to set the delete program. SET/C K: Used to set the program or check the programmed contents. CANCEL: Used to clear the programmed contents. @ REPEAT mode select buttons Used to activate the repeat play.
BATTERY INSTALLATION @ side out the battery compartment lid in the direction of the arrow. @ install the batteries (size “AA”, ROB) with correct polarities. @ Attach the battery compartment lid until it clicks. \@ REMOTE CONTROL OPERATION HANG BATTERY REPLACEMENT When the remote controllable distance becomes short, batteries are exhausted. Replace two batteries with new ones. Battery cautions incorrect use of the battery may cause leakage or explosion.
NOTES 1. Connect the Left and right LINE QUT 8 Switch off the power to the components jacks with the life and right CD or AUX when connecting or disconnecting the pin jacks on the amplifier or receiver using cords. the supplied connecting pin cord # Do not connect o the PHONE jacks. DIGITAL QUT frack and switch if you have an amplifier with digital in jack or D/A converter, the DIGITAL OUT jack can be used.
1. Press the POWER switch. 2. Press the OPEN/CLOSE button to open the disc fray. 3. Place a compact disc on the disc tray with the label surface side up. Check that the disc is resting at the center of the disc tray. 4. When the OPEN/CLOSE button is pressed, the disc tray closes. 8.
To begin disc play from a desired frack, select the desired starting frack number using the + or — button in the stop mode. Press the PLAY button and the play will begin at that track. When the player is already in the play mode and you wish to move to a different desired track, select the new track number using the + or — button. The selected track number is displaced and the play will begin at that track ® 7o listen to the track fallowing that presently being played: Press the + button once.
& When the desired index number is detected, the index search function will be released and the blinking INDEX indicator will tight. e If no index number is encoded on the disc, play will start from the beginning of the selected tune, @® On some discs, the index search operation may required slightly longer dime. ® To release the index search function.
X1 NOTES @ The index number cannot be programmed. @ |f the total program playback time exceeds 99 minutes 58 seconds, the rest time which is subtracted by 100 minutes from the real time will be displayed for the TOTAL TIME and REMAIN TIME display. ® In the program play, when the 24th or later tune is programmed, the REMAIN TIME and TOTAL TIME will not be displayed. DELETE PROGRAM PLAY 1. Cross the PAUSE/STOP button twice to set the player to the stop mode. 2.
COX-M your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested, if it cannot, or i the fault is not sifted in the SYMPTOM column, disconnect the player's power trod and contact your dealer of service carter for help. SYMPTOM CAUSE REMEDY ¥ falls to turn on when the POWERS switch is pressed. Power cord is not plugged in or ot completely inserted Firmly plug in the parer cord. ‘The disc tray dis not close completely.
AUDIO SECTION Frequency Response kHz +03 dB Harmonic Distortion Olsen Less than 0.002% (1 kHz) SN Ra tic Dynamic Range ..Org than 100 dB Wow & Flutter . Measurable Channel Separation ..More than 100 dB (1 kHz, 20 kHz) 2V 47 ohms 3V/150 ohms Output Voltage Output Impedance . Headphone Output INTERNAL SYSTEMS Optical Pick-up laser Error Correction System D/A Corrosion 18-bit floating (LR wiry Filter High bit digital filter and 5th order new active filter VI GENERAL Power Requirements Power Consumption .