Yea/ Living· • 1 E? 3 4 5 s 7 B 9 ✓ 0 a Yale• Assure Lock- SL Key Free Touchscreen Deadbolt Installation and Programming Instructions (YRD256/YRD456) Optional Network Module .□. 0 ~ ... ~.,, • 8 oc:::::P @ Before yo1J be9m ' x4 x3 #7 wood & #8-32 #8-32 X 5/16" machine x 20mm Machine screws Combination screws II DOWNLOAD THEBILTAPP fur 30 imeractive instructions & lo register your product -------~---------------------~ ., m Bllloa.
□ Preparing to Install Tools Needed Tools necessary only for new doors or adjusting existing prep. Template • Standard Phillips Head Screwdriver Pencil Drill ~ Utility Knife Measure Wood M o r t i s e ~ Chisel Level "'- -----.
Installing Latch & Strike Plate [~] I x4 ;::::::3 -- -- I I I I 2-3/411 position 0 11111 Pull. Press Bolt must be in retracted (unlocked) position. Note ~ horizontal orientation of mechanism. ~ t, \ \ ' ', \ ~, \ 0 □ ---.-Ii) 0 ---'-\ ~ ', 0 0
Installing Touchscreen Escutcheon Inside of Door Outside of Door ,.... I .. I Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. .. .. .. .. .. . .. .. .. @ ..
Installing Interior Mounting Plate Loosen screw to remove cover. x2 .... .... .... .... .... ~ Choose through bolt appropriate for your door thickness.
Attaching the Cable Assembly
Installing Interior Escutcheon T x3 '
@ [✓] Testing Operation ,,~ , , ,Q ~, , , t , t ' t t t Ll Bolt must be in retracted (unlocked) position before installing batteries.
Installing Batteries/Handing the Lock Welcome to Yale Real Living. 11 11 Lock automatically adjusts for proper handing. Installing Optional Network Module ~~~ ~ Lt Batteries must be removed prior to removing and/or inserting network module. ............
Installing Cover Tighten screw to replace cover. Congratulations, you've installed the Yale®Assure Lock™SL Key Free Touchscreen Deadbolt (YRD256MRD456) ! Turn sheet over to Programming Instructions to customize your product.
Programming Instructions Exterior Escutcheon 1 • 2 "P" Key (Return to Previous) 3 4 5 s 7 B s ✓ 0 0 Speaker Interior Escutcheon ~ Lockout Mode Indicator Failsafe 9 volt Battery Connection (Use Alkaline battery) Privacy Mode Button Lock Activation Master PIN Code must be created before any further programming. Max User Codes =250 with Network Module. Max User Codes =25 without.
Creating Master PIN Code Creating a Master PIN Code must be performed upon installation or after resetting the lock to factory default Programming and use of lock is not possible until this step has been successfully completed. 11 Register Master Code. Press the gear key to continue. 11 1 2 3 4 5 6 7 B 9 Press@ "Enter a 4 to 8 digit PIN code followed by the gear key. 11 Enter4-8 digit Master PIN Code. 1 2 3 4 5 6 7 B 9 " a "Registered.
Creating User PIN Codes Master PIN code must be created first. *Max user codes = 250 with Network Module. Max user codes = 25 without. "Menu Mode, enter number, press the gear key to continue.
Unlocking Door with PIN Code Enter PIN Code Press 0 Code Chart 1 2 3 4 5 6 7 B 9 " a o Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Type Master User User User User User User User User User User User User User User User - User Name User# PIN Code
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2. Remove the interior escutcheon to access the reset button. 3. The reset button (see image at right) is located beside the PCB cable connector. 4. While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release reset button. 5.
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the RED locked padlock will appear on the screen. Automatic Re-lock Time: After a successful code entry and the unit unlocks, it will automatically re-lock after thirty (30) seconds. Inside Indicator Light: Located on the interior escutcheon.
Feature Programming Through Menu Mode Using Master PIN code* 1. Touch screen with back of hand or palm to activate. ~ 2. Enter 4-8 digit master PIN code* followed by @ key. Lock Response: "Menu mode, enter number, press @key to continue." 3. Enter digit corresponding to the function to be performed followed by the @ key. Follow the voice commands. *The Master PIN code must be registered prior to any other programming of the lock.
Programming Troubleshooting Symptom Lock does not respond door is open and accessible. Lock does not respond door is locked and inaccessible. Unit is on for a while then shows no reaction. Lights dim. Unit chimes to indicate code acceptance, but the door will not open. Unit operates to allow access, but will not automatically re-lock. PIN codes will not register. Upon entering a PIN code and pressing 0 key, the unit displays "invalid code" error or lock times out without responding.
Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Door is binding a. Check that door and frame are properly aligned and door is free swinging. b. Check hinges: They should not be loose or have excessive wear on knuckles. Bolt will not deadlock a. Check for sufficient clearance of the bolt within the strike-side jamb. Correct this by increasing the depth of the pocket for the bolt. b.
FCC: Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Follow These Steps To Get Started! Yale 1 2 3 4 5 6 7 Download the Free August App Set Up New Device Install Your Yale Lock Install DoorSense Optional Connect Your Yale Lock Confirm Module Registration Complete System Set- Up Create a free account or log in to an existing one. From the menu, tap Set up a New Device, then choose the Connected by August option. Then choose the Yale Smart Lock option. Tap Start tobegin ~ the installation process.
■ New Door Marking Template I For 1-3/4" (44.5mm) Thick Door 2-3/4" (70mm) Backset 8 1 I 1" {25mm) Dia. / ✓- w , \ cc I ........ 1 (e_ I 1" {25mm) J'i11£EEIIIIEEIIIIEEIIIIDmia!Il;.l't.. For 1-3/8" (35mm) Thick Door > ~ ...J \ 2-1/8" ' {54mm) 'Dia , Thru Hole _ / / _,,, / / i r::-,,c;___.. I 2-3/8" (60mm) Backset \ -----➔ - -- --------~ I I i I 2-1/8" {54mm) Dia Thru Hole '\\ I ,-- \-1 ~ ------------{--- ------,-/)1g ..
Preparing Door & Frame Necessary for new doors or adjusting existing prep. 2-1/8 11 .✓ (56:~) !...... 11 (25mm) Dia. 2-3/8 (60mm) or 11 2-3/4 (70mm) Backset Drill holes 1/2 way through door then complete from other side to prevent splitting. 111 (25mm) Dia.
Keyed Locks Check Your Door Guide Key Free Locks For doors with existing hardware 4 15 7 a e ., 0 0 D Measure Clearance *Keyed locks are supplied with Screw Set D for 1-3/411 to 2-1/4 11 door thickness. Athin door gasket (sold separately) is required for 1-3/8 11 to 1-3/4 11 door thicknesses. Measure Door Thickness ✓ Greater tha1 lA ✓ s, Coro X Less than A X Less than B !: .:.'"-r.• .•~t·: ; r:. ···. ...
I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 11111. I I 111111 1/8 3/8 5/8 1/4 7/8 1/8 3/4 3/8 5/8 1/4 1/2 7/8 1/8 3/4 3/8 1/4 1/2 AG E B ---+C ----+D Green Black Silver * B. 1-3/8" Door Thickness; use Screw Set B. Screws are tinted green. ✓ EqualsG 7/8 1/8 3/4 1/4 3/8 5/8 1/4 7/8 1/8 3/4 4 3/8 5/8 1/4 1/2 1/2 3 7/8 1/8 3/4 5/8 1/4 1/2 5 3/8 * C. 1-3/8" - 1-3/4" Door Thickness; use Screw Set C.
C L 2 1/8" (54 mm) Dia. Half Deep Hole C L C L C L 2 1/8" (54 mm) Dia. Half Deep Hole 1" (25 mm) Dia. FOLD OVER DOOR EDGE C L See Latch Installation Template for detail. 2 3/4" (70 mm) Backset For 2 1/4" (57 mm) Thick Door Latch Installation Template for 2 1/4" (57 mm) Thick Door C L 2 1/4" (57 mm) 1 5/8" (41 mm) FOLD OVER DOOR EDGE For 2 " (51 mm) Thick Door #8-32 Tapped Hole C L FOLD OVER DOOR EDGE 2 /8" (60 mm) Backset 3 C L /4" 1" (6.
Check Door Compatibility 2 1/8" minimum Deadbolts 1-3/4" to 2-1/4"door thickness 4" YRD256/156 center to center minimum 1-3/8" to 2-1/4" YRD216 YRD226 door thickness Interconnected 1-3/8" to 1-3/4"door thickness 4" or 5.
Before You Start, Download the Yale Secure App Follow the steps on the back of this guide after you install your Yale Assure Lock.® Yale Secure app Note: This lock is not for use with the Yale Assure app Yale Customer Service: 1-855-213-5841 Yale® and Assure Lock® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group Company. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. © Copyright 2018.
Before You Start Downoad the August App Follow the step-by-step installation video in the August app. a I FRONT DOOR •• • • • Open I Unlocked August .> Google Play , • ()ownlo,ut on th1· II.II AppStore August Customer Support Call: 1-844-284-8781 Visit: august.com/support Yale® is a registered trademarks of ASSA ABLOY Residential Group. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.
Before you begin. Val~ Download the free BILT app for 3D. interactive installation tutorials. £ ..... ,,_.. Google Play Download installation manuals in other languages: YaleHome.com/Support Register your product and get 20%OFF~ Visit: YaleHome.com/Register Get 2QOfoOFF* at ShopYaleHome.
• ALERT I IMPORTANT Information on Product Returns Call us first! We're here to help. For any technical questions or support, please call 1-800-810-WIRE (9473) for Yale Technical Services. Support is available: M-F 8am to 7pm EST Email: Service@YaleLock.com ~ Download the free Bilt app for 3D interactive instructions GET IT ON ~ Google Play S Ap";s;~~~ ISL- 1575-00 Rev.