Specifications

Specications
Model Name: Yale Connect Bridge Plus
Model Number: AYR-BDG-CB2
Bluetooth specication: V5
2.4 GHz ISM Band
Antenna: Internal single-band
Wi-Fi specication: 802.11a/b/g/n
2.4 GHz, 5 GHz
Antenna: Internal dual-band
Security: WPA2
Power supply: 5VDC, 1A
The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc. and
any use of such marks by YALE
Home, Inc. is under license. Other
trademarks and trade names are
those of their respective owners.
Apple, Apple Watch, HomeKit, iPad, iPad
Air, and iPhone are trademarks of Apple
Inc., registered in the U.S. and other
countries. HomePod is a trademark of
Apple Inc.
Use of the Works with Apple badge means
that an accessory has been designed
to work specically with the technology
identied in the badge and has been
certied bythe developer to meet Apple
performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards.
Environmental
Yale Connect Bridge Plus:
Dimensions: 3.75” x 3.5” x 1”
Weight: 3.2 oz
Certication: FCC, IC, CE
Operating temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 158° F (-20° to 70° C)
Operating humidity: 10 to 85% non-
condensing
Safety
-Read instructions before using
this product
-Keep these instructions for future
reference
-Heed all warnings on the product
and in this manual
-Follow all instructions
-Do not use this unit near water or
excessive moisture. Do not use
this product near a bathtub,
washbowl, kitchen sink, laundry
tub, in a wet basement, near a
swimming pool, or anywhere else
that water or moisture are present.
Do not use with wet hands.
-Avoid prolonged exposure to
direct sunlight or heat above
operating temperature
-Do not install near any heat
sources, such as radiators, heat
registers, stoves or other unit
(including ampliers) that produce
excess heat
-Only use attachments/
accessories specied by the
manufacturer
-Do not swallow any parts. Keep any
small parts away from children at
all times, potential choking hazard.
-This product contains no user
serviceable parts. Please contact
your local supplier.
-Modication of this product
(including unauthorised hardware,
rmware or software) in any way
voids any warranty and compliance of this
product and becomes the sole responsibility
of the user.
-User assumes all risk associated
with the suitability, installation and
performance of the module and other third
party components, hardware, software
and services that user selects.You assume
all risk associated with the suitability,
installation and
performance of the door lock and other third
party components, hardware, software and
services that you select.
Compliance
FCC Compliance Notice
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving
antenna.
-Increase the separation between
the equipment and receiver.
-Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an
experienced radio/TV technician for
help.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1 )
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference that
may cause undesired operation.
Any changes or modications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
ISED Compliance Notice
INDUSTRY CANADA COMPLIANT
This Class A digital apparatus
complies with Canadian ICES-003.
Changes or modications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
This device complies with Industry
Canada license-exempt RSS
standard(s). Operation is subject to
The following two conditions: (1)
this device may not cause
Yale Connect Bridge Plus
Terms & Conditions
See YaleHome.com for more information.
2021© Yale Home
Yale® is a registered trademark of ASSA ABLOY Residential Group. Other
products’ brand names may be trademarks or registered trademarks of
their respective owners and are mentioned for reference purposes only.
©Copyright 2021. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Residential
Group is prohibited.
P/N AYR-BDG-CB2-TC-0028
interference, and (2) this device
must accept any interference,
including interference that may
cause undesired operation of the
device.
INDUSTRIE CANADA
CONFORME Cette classe A
appareil numérique conforme à la
norme NMB-003. Les
changements ou modica-tions
non expressément approu-vés par
la partie responsable de la
conformité pourraient annuler
l’autorité de l’utilisateur à utiliser
l’équipement. Le présent appareil est
conforme
aux CNR d’industrie Canada
applicables aux appareils radio
exempts de licence. L’exploitation
est autorisée aux deux conditions
suivantes:
(1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouil¬
lage radioélectrique subi, même si
le brouillage est susceptible d’en
compromettre le fonctionnement.
RF Radiation Exposure
Radiation Exposure Statement :
This equipment complies with
FCC/IC radiation exposure limits
set forth for an uncontrolled
environment. The minimum
distance from the body to use the
device under normal conditions is
at least 20 cm (7.9 inches).This
transmitter must not be co-located
or operating in conjunction with
any other antenna or transmitter.
Australia & New Zealand
(RCM & R-NZ)
RCM Radiation Exposure Statement
This system has been evaluated for RF
exposure for Humans as referenced in the
Australian Radiation Protection standard
and has been evaluated to the ICNIRP
(International Commission on Non-Ionizing
Radiation Protection) limits.
This product has been deemed to
comply with the RF exposure
limits under the general public
limits. The minimum distance from
the body to use the device under
normal conditions is at least 20cm
(7.9 inches).
This product complies with all the
applicable requirements of the Regulatory
Compliance Mark (RCM) for Australia
& New Zealand and Radio Spectrum
Management (R-NZ)
requirements for New Zealand.
COLOR LEGEND
Green Indicators (not printed)
Magenta Body Border (not printed)
Black Printed in Black
Blue Dynamic
REV DATE
02/08/2021
BACK
FRONT
--/--/----
--/--/----2
0
--/--/----3
1
ARTWORK NO .DEFAULT TOLERANCES
DRAWING NAME
.X ± .25
.XX ± .1
Decimal
DRAWING BY
Page 1 of 1
DATE
Artwork, Terms and Conditions, Coronado, Yale
085-00XXX
Greg Mack 02/08/2021