making the MFDs think™ YSoft SafeQ Terminal Professional v3.5 Administrator’s Guide Version 1.
3.11.2009 © 2009 by YSoft s.r.o. All rights to this document, domestic and international, are reserved by YSoft s.r.o.. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, me‐ chanical, photocopying, recording, or otherwise) without prior written permission of YSoft. YSoft®, YSoft SafeQ® and its logo are registered trademarks of YSoft s.r.o.
23.11.2009 TABLE OF CONTENTS Table of Contents .................................................................................................................................................3 1 Introduction.................................................................................................................................................4 1.1 Purpose of document .........................................................................................................................4 1.
23.11.2009 1 1.1 INTRODUCTION PURPOSE OF DOCUMENT This guide provides the essential information on the installation, configuration and usage of the YSoft SafeQ Terminal Professional v3.5 with color display. You are expected to understand some networking and printing concepts: in particular, you should be familiar with the client/server paradigm, with IP addressing and TCP/UDP ports. Ideally, you should know something about LDAP and SNMP as well.
23.11.2009 2 OVERVIEW The YSoft SafeQ Terminal Professional has a graphic touch‐screen and is equipped with a four‐port network adapter. Picture 1: YSoft SafeQ Terminal Professional It also features a microcomputer, flash ROM, network interface and a card reader. The card reader is optional, as PIN code can be used for authentication instead of cards. Terminal is supplied with an external power sup‐ ply (included in the package).
23.11.
23.11.
23.11.2009 FLASH memory 16MB Blocking cables to MFD YES Internal operating system LINUX Customization option YES/as required YSOFT SAFEQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 4 TERMINAL SETTING 4.1 TERMINAL CONFIGURATION ‐ COMMON 4.
23.11.2009 Picture 2 ‐ Service menu 4.
23.11.2009 4.
23.11.2009 Card reader – choose the type of card reader installed Card reader test – place a card and see card number on the terminal screen Fingerprint reload – support for biometric login Fingerprint clear – consult Ysoft SafeQ Fingerprint technical specification for more details 4.
23.11.
23.11.2009 Main menu after P/C – enabling of displaying Main menu after the the print / copy session is finished. Appli‐ cable only for terminals with readers, those are capable of ensuring card presence. enabled – re‐login is forced to server after print / copy operation finished. Terminal returns to the Main menu (user´s card must be still present at the reader). Only way to end session is to click END button in the Main menu.
23.11.2009 Default backlight – set up backlight intensity Minimal backlight – set minimal backlight PM Timeout – define timeout for power management (minutes) 4.10 DIAGNOSTIC UTILS Picture 10 ‐ Diagnostic utils Debug mode ‐ enables the debug mode for the terminal (No log by default).
23.11.2009 Reboot – reboot the terminal Emergency update – run an emergency firmware update from YSoft SafeQ server Change PIN – change service menu access PIN code (“customer level” PIN) Change part. PIN – change service menu access PIN code (“partners level” PIN) YSOFT SAFEQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 5 CONCLUSION In this document you got acquainted with the installation procedures of YSoft SafeQ Terminal Professional v3.5. For other information about setting up of terminal on SafeQ server consult SafeQ ‐ Administrators Guide, which you can download along with other newest manuals on the Partner’s Portal. Partner‘s Portal web page: http://www.ysoft.com/partner‐network/log‐on‐to‐partner‐portal/ YSOFT SAFEQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 6 RELATIONSHIP WITH OTHER DOCUMENTS This section describes how this guide is related to other documentation: Nr. 1. 2. Document Version Author YSoft SafeQ Terminal Professional v3.5 – Service Guide [EN] 1.1 RMU YSoft SafeQ Terminal Professional v3.5 – User’s Guide [EN] 1.3 RMU 3. 4. 5. 6. 7. YSOFT SAFEQ TERMINAL PROFESSIONAL V3.5 – ADMINISTRATOR’S GUIDE V1.
23.11.2009 7 VERSION HISTORY Document author/owner: YSoft s.r.o. Version Date Change Status Accepted Author 0.1 06/2009 Initial version 1.0 06/2009 Creation 2 separates documents – Service Guide and Adminis‐ trator’s Guide Final PNE 1.1 09/2009 Chapter 1 update (disclaimer added) Final PNE 1.2 09/2009 Chapter 4.7 update (new menu options description) 1.3 11/2009 Chapter 1 and Chapter 4.7 update Accepted Final RMU RMU PNE YSOFT SAFEQ TERMINAL PROFESSIONAL V3.
