Specifications

ManualsBrandsXUNTONG ManualsElectronicsUART CLOUD MODULE

UART Cloud Communication Assembly

1 Scope

The assembly is designed to the application scenarios of KohlerKonnect, it works as a bridge unit between

Kohler intelligent devices and upper network devices, such as intelligent gateway or router

2 Related Standards

2.1 Wi-Fi: in compliance with 802.11b/g/n，WEB，WPA/WPA2，PSK/EnterPrise

2.2 Bluetooth: in compliance with BQB certificate

2.3 RF: in compliance with EN300328

2.4 EMC: in compliance with EN301489-1 and EN301489-17)

2.5 CE/CB/FCC certificated

2.6 In compliance with RoHS directives

3 Specification

3.1 Operation Conditions

3.1.1 Operation temperature: -10℃～55℃

3.1.2 Operation humidity: below RH98%

3.1.3 Storage temperature: -40℃～71℃

3.2 Supply Voltage: DC4.5V – DC 7V

3.3 RF signal strength

Bluetooth:

Transmitter： -1.14dBm@BLE

Receiver： > -96dBm

Wi-Fi:

Transmitter： 16.28dBm@11b，16.70Bm@11g，16.79dBm@11n

Receiver：-87~-76dBm@11b，-87 ~-65dBm @11g，-85~-64dBm @11n

4 Outline structure and Electrical Interface

4.1 Structural drawing

4.2 Pin-out of connect: 5, UART supported,

Pin No. HW Label I/O Description

1 CONNECT(3.3V) Out L—Connection

H--- Disconnection

Summary of content (5 pages)

PAGE 1
UART Cloud Communication Assembly 1 Scope The assembly is designed to the application scenarios of KohlerKonnect, it works as a bridge unit between Kohler intelligent devices and upper network devices, such as intelligent gateway or router 2 Related Standards 2.1 2.2 2.3 2.4 2.5 2.6 3 Wi-Fi: in compliance with 802.
PAGE 2
3 4 5 5 CCM_RXD(3.3V) CCM_TXD(3.3V) 5V GND In Out In In UART RX UART TX POWER GND Features of Assembly 5.1 General Features 5.1.1 OS of mobile devices  Above Android 4.4.2 or iOS 8.0 5.2.
PAGE 3
Parameter Description frequency 2.412 ~ 2.462Ghz Standard 802.11b/g/n Single channel modulation 11b: DBPSK, DQPSK,CCK for DSSS 11g: BPSK, QPSK, 16QAM, 64QAM for OFDM 11n: MCS0~7,OFDM＊ Data rate 11b:1, 2, 5.5 and 11Mbps 11g:6, 9, 12, 18, 24, 36, 48 and 54 Mbps 11n: MCS0~7, up to 72Mbps Antenna PCB Antenna (Default) 6. Hardware Specification 6.1 Bluetooth module  An ultra-low power 2.
PAGE 4
7. Statement 7.1 FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 5
ii. During manufacturing process of the integrated device, the module is soldered onto the pcb of the integrated device. iii. The antenna is integral PCB trace Antenna and maximum gain is 2 dBi for WiFi and 0dBi for BT. This module has been approved by FCC to operate with the antenna types with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. iv.