H6E Diagnosis System User Manual
H6E -Intelligent Diagnosis System Declaration 1. This manual is designed for the usage of H6E, applying to H6E automotive diagnosis platform. No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of Xtool. 2. This electronic control system diagnostic unit is designed for professional vehicle maintenance technicians.
H6E -Intelligent Diagnosis System Contents Chapter I．About H6E ...................................................................................................... 3 1.1 Appearance .......................................................................................................... 3 1.1.1 Front view ................................................................................................. 3 1.1.2 Back view ......................................................................................
H6E -Intelligent Diagnosis System Chapter I．About H6E 1.1 Appearance 1.1.1 Front view 1.1.
H6E -Intelligent Diagnosis System 1.2 Interface of tablet 1.2.1 Top View ① ② ③ ④ ⑤ ①USB3.0 interface: Wired data transmission ②Mini HDMI interface: Audio and video transfer ③DB15 interface: Extended reservation port ④DC charging port: Device Charging ⑤Power Button: Power on / off 1.2.2 Bottom View ① ①Charger Interface: A reserved charger interface 1.2.3 H6E Technical Parameters Operating System: Android Processor: Quad core processor 1.
H6E -Intelligent Diagnosis System Camera: rear camera, 8 millions pixels, with flash autofocus. Sensor: gravity sensor Audio input / output: microphone/speaker. Interface: USB3.0, DC charging port, MINI HDMI, DB15 interface. Battery: 10000mAh 3.7V lithium polymer battery Input voltage: +9~+12V DC Working temperature: -20℃ to 50℃ (-4℉ to 126℉) Relative humidity: <90% Appearance size: 275*183*33.
H6E -Intelligent Diagnosis System Chapter II. How to use H6E 2.1 Main Interface 2.1.1 Main Interface 2.1.
H6E -Intelligent Diagnosis System 【Setting】Language, unit, Bluetooth 【Xtool cloud】Online chatting 【One-click upgrade】Upgrade software 【Remote control】Xtooltech support center and function keys 2.1.
H6E -Intelligent Diagnosis System 【Return to the main interface of Android】 【Show recently used programs】 【Screenshot】 【Back to the diagnosis model interface】 【Click to record the data, click again to send your feedback to XTOOL service center.】 2.2 Connection Diagnosis 2.2.1 Vehicle Connection [①→②→④→③] 1) The H6E machine is connected to the vehicle through the main cable. 2) Turn on H6E machine and the car ignition switch to start diagnosis.
H6E -Intelligent Diagnosis System ① H6E Tablet ② Main cable ③ Measured vehicle ④ OBDII-16 Adapter (Select other adapters if needed) 2.2.2 Precautions Before Use 1) Battery voltage range on the car: +9~+12V DC.
H6E -Intelligent Diagnosis System vehicle has to meet certain requirements, for example: engine temperature 80℃ /105℃, turn off loads (such as headlights, air-conditioner, etc.), put accelerator pedal in released position, etc.
H6E -Intelligent Diagnosis System 2.3 Diagnosis 2.3.1 Menu selection 1) After the H6E machine is successfully connected to the vehicle, you can choose your vehicle type on the menu shown as follows: 2) According to your needs to choose [special function] [European car] [Asian car] [American car] [Australian car] [Chinese car] for diagnosis, and click on the search icon in the upper right corner, for a quick search of your module type.
H6E -Intelligent Diagnosis System 2.3.
H6E -Intelligent Diagnosis System (The main function menu for different cars is slightly different, and the following options are included in the common main features menu) [Read ECU version information], [Read ECU], [Read DTCs], [Clear DTCs], [Read live data], [Actuation components test], [Special Functions] 2.3.3 Read ECU 1) This function is to read the ECU version information, in some of the electronic control displayed as "System identification" or "System Information" menu, the meaning is the same.
H6E -Intelligent Diagnosis System 2.3.4 Read DTCs Select the "Read fault code" function to read the fault code stored in the ECU, fault codes that are successfully read will be shown.▼ 2.3.5 Clear DTCs 1) Select the "Clear Code" icon to clear the fault codes that are read. As shown in the following figure.
H6E -Intelligent Diagnosis System 2) Click "Yes" to clear the fault codes. 2.3.6 Read live Data By reading the data stream function, it is possible to read the data value of the control unit. Click icon on the top, you can save the current data stream of this system for your better reference later. 2.3.7 Special functions The special functions in different vehicle systems will also be different. 2.3.
H6E -Intelligent Diagnosis System 1) Return the menu to "dynamic diagnostic data" to see the "Action test" function menu, choose to display the system can be used to perform action test of the Actuator component menu. Tip: The "Action test" function is a part of the system to perform functional testing of components, when performing this function, the diagnostic instrument will simulate the ECU signal to carry out the action of the component to determine whether the actuator or line is good.
H6E -Intelligent Diagnosis System 2.5 Diagnose report 2.5.1 Diagnose report Diagnostic Report is used for re-viewing and printing the saved files, such as Live Data, Trouble Codes or pictures generated in the process of diagnosis, users also can view a record of which cars have been previously tested. It includes three parts: PDF Files, Pictures and Data Playback.
H6E -Intelligent Diagnosis System The data stream, fault code..etc. in the course of the vehicle diagnosis is generated into a PDF report. 2.5.2 Data playback The Data playback feature lets you see which cars, which systems, and playback of recorded data streams and freeze frames. 2.
H6E -Intelligent Diagnosis System 2.7 Xtool Cloud System All vehicle maintenance technicians using our equipment can easily inquire the maintenance information we put on the cloud service platform, and communicate with other Xtool users on the Forum there. you have access to online database that provides you extensive repair and diagnostic techniques as well as vehicle maintenance programs. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Shenzhen Xtooltech Co., Ltd Company address: 2nd Floor, Building No.2, Block 1, Excellence City, No.128, Zhongkang Road, Shangmeilin, Futian District, Shenzhen, China Factory address: 2/F, Building 12, Tangtou Third Industrial Zone, Shiyan Street, Baoan District, Shenzhen, China ServiceHotline: 400-880-3086/ 0755-21670995 Email: marketing@xtooltech.com Fax: 0755-83461644 Website: www.xtooltech.
