Air Scrubber Owner's Manual Model: X-2000 Series / X-3000 Series / X-4000 Series (115 V~60HZ) Read and save these instructions before use www.xpower.com | 1-(855)-855-8868 | info@xpower.com Index: NA-1-A7 Edition: 3.0.
Safety Instructions ! WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT. The user of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair its operation and void the warranty. • Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items.
Items Included • Air Scrubber x 1 Air Mover Owner's Manual XXX Manual De Usuario (página 10) XXX Mode d'emploi (page 18) • Owner’s Manual x 1 Model / Modelo / Modèle: P-80 Series, P-100 Series, P-200 Series (115V 60HZ) Read and save these instructions before use Lea y guarde estas instrucciones antes de usar la unidad Lire et conserver ces instructions avant utilisation www.xpower.com | 1-(855)-8868 | info@xpower.com Index: NA-1-A2 Edition: 1.0.
Machine (Continued) * For model X-2480A/X-3400A/X-4700A/X-4700AM only. ** Additional electrical receptacle function does not apply to all models mentioned in this manual (See Page 16: Technical Specifications).
Air Scrubber Introduction • XPOWER’s unique and highly innovative Air Scrubbers create a fresh and clean environment for various purposes. • With a special designed powerful motor, XPOWER Air Scrubbers are able to provide suction in even difficult areas. • The included filtration system can capture a wide range of compounds and prevents organism migration from location to location.
Extension Setup (Optional) Outer Nylon Mesh Filter Foam Cover Intake Ducting • Turn off the machine and remove the outer nylon mesh filter* and foam cover**. • Attach the ducting hose to the intake. * For model X-2380/X-2580/X-3380/X-3580 only. ** For model X-2480A/X-3400A/X-4700A/X-4700AM only. Exhaust Ducting • Turn off the machine. • Attach the ducting hose to the exhaust.
Control Panel 4 5 3 2 MAX OFF Filter change light Filter Change Light 1 OFF LOW Variable Speed Control Five Speed Control Activity Indicator . HOURS 1/10 Time Meter Filter Change Light This indicates that the filters have exceeded the maximum capacity of particles, and the filtration efficiency has diminished. You should clean or replace the filters.
Control Panel (Continued) Time Meter (For Model X-4700AM Only) • The time meter shows the total running time from the first usage to the current moment. • When the machine turns on, the activity indicator will blink. The running time starts to count. When the machine is off, the activity indicator will stay illuminated. • The value can’t be reset. When the value exceeds 9999.9 hours, it will start over from 0 again. Foam Cover* • Before use, please take off the foam cover.
Additional Electrical Receptacle* (Daisy Chain) * The additional electrical receptacle function does not apply to all models mentioned in this manual. (See Page 16: Technical Specifications) Regular Additional Electrical Receptacle (For model X-2480A) AUXILIARY OUTLET 115 VOLTS AC 12A PR Electrical Receptacle RESET ESS TO Circuit Reset Button CIRCUIT BREAKER TOTAL OUTPUT : 12 AMPS MAX WITH THIS UNIT OFF , 8.
Transportation Handle Carry with Handle Stack in Carrier Lift the Air Scrubber with the handle on the top of the housing. You can stack up to 5 Air Scrubbers and transport. User Maintenance Instructions Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty. Before performing any maintenance or cleaning, always disconnect the Air Scrubber from its power source.
Machine Maintenance (Continued) (Continued) Organize the Cord • Wrap the power cord around the intake for storage after use.* • Use convenient clip at end of cord to secure in place. * Wrap-around design does not apply to all models mentioned in this manual. Filter Maintenance To ensure the best filtration efficiency and to prevent secondary pollution of used filters, you should replace or clean the filters frequently or when the filter change light illuminates. Please follow the instructions below.
Filter Maintenance (Continued) Other Filters Open the filter cover by releasing the latch kit on top. Unload other filters inside. Clean the filters (See Also Page 4: Filters) • Nylon Mesh Filters/Washable Filters: These filters are washable with water. Use a vacuum or clean cloth to remove loose debris. And then further clean the filter with water. Use a cloth to remove the water on the filter and dry it naturally in the air. • Pleated Media Filters: This filter is not washable.
Filter Maintenance (Continued) ! WARNING: DISPOSAL OF FILTERS NO LONGER IN USE The particles captured by a used filter can cause adverse human health effects and contaminate the nearby environment once the filter is exposed to the open air. Adequate personal protection equipment (PPE) is required during the whole process, for example, industry approved masks, eye protectors, gloves and coveralls. You should place the used filters in a sealed plastic bag before disposing. Follow local disposal regulations.
Filter Maintenance (Continued) EVA Last Stage Filter: • On one of the side of the last stage filter, there is an EVA sealing pad around the frame. Former Stage Filters Housing • The last stage filter must be loaded with EVA side facing the machine housing. • The EVA sealing pad ensures that all the air is filtered. Tips: • On one of the side of each filter, there is a label with an arrow showing the airflow direction.
Troubleshooting Guide PROBLEM Air Scrubber does not start POSSIBLE CAUSE SOLUTION No electricity. Check for power supply. The power cord is not properly plugged in. Remove and reconnect the power cord. The circuit breaker on the additional electrical receptacle (Daisy chain)* trips. Remove all appliances on the additional electrical receptacle and press circuit reset button. Unit runs but no or very low air movement Air outlet is blocked. Remove blockage. Filters are fully loaded.
Technical Specification Machine Specification MODEL NUMBER X-2380 X-2580 X-2480A X-3380 X-3580 X-3780 X-3400A X-4700A X-4700AM 4.5 A 115 V~60 Hz 2.8 A Voltage/ Frequency Amperage 18.5 x 12.3 x 21.6 in. / 47.0 x 31.2 x 54.9 cm 28.8 lbs. / 13.1 kg Variable Speed 2 GFCI Outlets 33.1 lbs. / 15.0 kg 19.6 x 12.3 x 21.6 in. / 49.8 x 31.2 x 54.9 cm Yes 750 CFM 600 CFM 19.6 x 12.3 x 21.6 in. / 49.8 x 31.2 x 54.9 cm 32.2 lbs. / 14.6 kg 5 Speeds 2 Normal Outlets 32.8 lbs. / 14.9 kg 30.5 lbs. / 13.
Filter Specification FILTER MODEL NUMBER Type of Filter Size Thickness 9 x 9 in. - 12 x 12 in. - NFS13 13 x 13 in. - NFS16 16 x 16 in. - 13 x 13 in. 0.6 in. 16 x 16 in. 0.8 in. 13 x 13 in. 0.6 in. 16 x 16 in. 1.4 in. 13 x 13 in. 1.3 in. 16 x 16 in. 1.5 in. 13 x 13 in. 2.0 in. 13 x 13 in. 1.4 in. 16 x 16 in. 1.5 in. 16 x 16 in. 2.0 in.
XPOWER Limited Warranty (USA) 1 YEAR LIMITED WARRANTY XPOWER-branded products purchased in the U.S. from authorized distributors include a 1-year limited warranty. Contact XPOWER to confirm warranty information about your product(s). This limited warranty covers defects in materials and workmanship in your XPOWERbranded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your country will cover products purchased outside the U.S.
If you are instructed to return the unit for service or replacement, please: (1) Request a RMA (Return-Merchandise-Authorization) number. (2) Use the original or an equivalent packaging, prepay shipping charges at your own expense to the address provided by XPOWER, with the RMA number on the shipping label or the packaging. (3) Include all the original parts and components. XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any.
XPOWER Manufacture, INC. 668 S. 6th Avenue, City of Industry, CA 91746 USA www.xpower.com | 1-(855)-855-8868 | info@xpower.com Read and save these instructions before use Index: NA-1-A7 Edition: 3.0.
