QUICK START GUIDE Please read before using your new device.
Device Layout To turn on the device, press and hold the power key for a few seconds.
Installing one or two NANO-SIM card(s)
WARNING: your device only accepts NANO SIM cards. Do not attempt to insert Micro SIM card in the tray, it will damage the device and void the warranty. Steps: • Insert the ejection pin into the hole on the tray to loosen the tray. Then slide the tray out carefully. CAUTION: Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. • Pull the tray out carefully. CAUTION: Ensure the tray remains perpendicular to the hole while you pull it out.
• Insert the tray back in the device carefully. CAUTION: Ensure that the tray is inserted in the opening and remains perpendicular to the hole during insertion. Otherwise, the tray or device may be damaged. • Push the tray in completely.
Installing one Micro SD card WARNING: your device only accepts one MICRO SD in the slot next to the outside tray door. Steps: • Insert the ejection pin into the hole on the tray to loosen the tray. CAUTION: Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may be damaged. • Pull the tray out carefully. CAUTION: Ensure the tray remains perpendicular to the hole while you pull it out.
Charging the Battery WARNING: your device uses the new USB type C reversible plug. You should only use the USB cable provided with your device. Do not attempt to connect any other type of micro USB plug in the device. It will break the connector and void the warranty. Before you turn on your device for the first time, it is recommended that you charge the battery.
Removing the Battery Battery is not user replaceable. Please refer to your local dealer for assistance. Manufacturer does not accept liability for any damage or loss which may arise from failure to precisely follow these warnings and instructions.
Emergency SOS Button In case of emergency press and hold the SOS red button under the antenna that will trigger an interactive communication to GEOS, an international search and rescue organization that will monitor your status during your emergency. Rest assured help is quickly on the way. Maintaining water and dust resistance Your device offers protection against dust and water. However, the device may be damaged if water or dust enters the device.
• Ensure the SIM card tray is fully closed at all time. • Do not immerse the device in water. • Do not expose the device to water moving with force. • If the device is exposed to clean water, dry it thoroughly with a clean soft cloth. If the device is exposed to other liquids such as salt water, ionized water or alcoholic beverage, rinse it with clean water and dry it thoroughly with a clean soft cloth. If you do not follow these instructions the device performance and appearance may be affected.
Specific Absorption Rate (SAR) Certification information THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile is designed not to exceed the limits of exposure to radio waves recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
Safety information Read all safety information before using the device to ensure safe and proper use. Warning Follow the warning information provided below to prevent incidents such as fire or explosion • Do not expose the device to physical impact or damage. • Use manufacturer approved batteries, chargers, accessories and supplies. • Prevent the multipurpose jack and battery terminals from contacting conductive elements, such as metal or liquids.
• Do not store your device near or in heaters, microwaves, cooking equipment or high pressure containers. • Keep your device dry. • Comply with all safety warnings and regulations regarding mobile device usage while operating the vehicle. To prevent hearing damage when using a headset, do not listen to sound at high volume for long periods.
Regulatory Certifications Your XPLORE X7 is fully certified to operate in most countries, including the EU (CE certified), North America (FCC Certified), and other countries.
Correct disposal The marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste. This product is RoHS compliant. The marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.