XPAND 3D Glasses Lite (RF) Model No.
Glasses Overview (1) Button (ON, OFF, Pairing) – located on the inner side of the right earpiece. (2) LED – located on the outer side of the right earpiece, near the earpiece hinge. What's Included » (1 piece) Active 3D Glasses » (1 piece) Charging cable (USB) Turning ON Your Glasses » Shortly press button (1) once. » Red LED (2) will light up from off to bright.
Proximity Association with 3D Host Please note that XPAND 3D Glasses Lite RF can only pair with RF devices such as Bluetooth® / RF enabled TV’s and RF emitters. They do not work with IR (InfraRed) 3D TV’s or IR emitters. This procedure shall be followed every time the glasses are introduced to a new 3D host. During the proximity association, the 3D glasses shall be located within 3ft (1m) from the 3D host (3D TV, 3D Emitter…). »» Turn on the glasses.
When a double click is detected, the LED (2) will indicate the eyewear mode: Player 1: One Quick Blink Player 2: Two Quick Blinks Normal 3D*: One Long Blink *Accessible only if the 3D device is not emitting dual view signal. Indicating the Battery State »» If LED (2) flashes every couple of seconds during the operation, this indicates that the battery level is low. »» Charging is indicated by a continuously lit LED (2).
Frame Specifications Lens Size: 2,2” diagonal (58 mm) Weight: 1.3 oz (37 g) Dimensions (W x H x D): 6.7” x 1.6” x 6.5” (170 mm x 40 mm x 165 mm) Frame Colour: Black ATTENTION – Consult Accompanying Documentation Important Safety Instructions »» »» »» »» »» »» »» Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Only use the attachments/accessories specified by the manufacturer.
»» When watching stereoscopic images, do not incline your head relative to the horizontal direction of the images. »» Stop watching stereoscopic images if you notice double images. It is important that display devices be adjusted appropriately. »» The recommendations described in this list may apply to some visual products more than others. Regulatory Compliance Statements This device complies with part 15 of the FCC Rules.
Technical Support For direct support with XPAND Consumer products please contact us at: technicalsupport@xpandvision.com Manufactured by: X6D Ltd., 195 Arch Makariou III Ave, Neocleous House, P.C.