Table of Contents IL Introduction 1. FCC Notice 2. Package Contents 3. System Requirements II. Hardware Installation 1. P$/2 Mouse Mini Din 6 Pin Connector 2. Serial Mouse — D-Sub 9 Pin Connector Il. Software Installation 1. For Win 95/98 2. For Win 31, DOS IV. Using Software V. Software Installation VI How to use the Mouse Driver for DOS 1 Loading the Mouse Driver for DOS 2. Parameters of the Mouse Driver for DOS VI. Operation Guide for the Mouse Driver for Windows 3.1 1.About the Driver for Windows 3.
Thank you for your purchase of the most technologically advanced computer input device in the world. With almost double the input resolution of currently available devices in the marketplace, its speed and ease of use will make your computer experience more productive and enjoyable. Give the device an ample period of time for evaluation. The increased speed and sensitivity will require different handling and usage techniques than those for devices from other suppliers.
1. Federal Communications Commission (FCC) Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
Before you begin installation of this device please note there may be software conflicts generated with some other installed drivers. To prevent the occurrence of conflicts, disable or remove existing mouse drivers and change to standard serial or PS/2 mouse drivers as supplied with your operating system. As with all electronic devices, your computer should be powered down before the installation proceeds.
Software Installation This software driver only design for the XN Tech mouse. So if you use other mouse it may not work by installing this driver. L 2 RETIES Connect the mouse cable into the connector of your computer. Start Windows 95 or windows 98, If this is your first mouse for your new system, the Windows will try to find the default driver for you new mouse {Plug and Play). Please Jet the Windows do the Plug and Play action, don't cancel it. Insert the XN 3D diskette into floppy A or B.
Using Software Once you have installed the software driver and restart the Windows, an activator icon will appear at Windows 95 Taskbar. Double-click the activator icon to activate the Mouse properties software which contains several Pages for you to configure. Or you can right single-click the activator icon to popup a menu with Which you can select the following options; 1. AP Link Con fig. Configure the application list of My Application within the Configure the Easy jump.
2. XN Tech Mouse Con fig. Activate the Mouse properties software. 3. Close Techno Mouse Close the mouse software, and disable the extra functions within the mouse properties. Select the XN Tech Mouse icon in the Start Menu to restart the Mouse activator software. The Mouse properties software can also be activated from the ‘MouseControl® of control panel.
Software features « Step Saver Page . Visibility Page . ivi + Wheel page This software utility adds much more features than the standard mouse. We categorize these features into 4 groups within the pages of mouse properties. You can configure these features by choosing the mouse properties from the control panel. Please read the following description of the software features.
2. Click saver Enable this feature, you only single click the mouse left button where you normally Double-click. Enable this feature, you select a window just by pointing at the title bar of that window. Enable this feature, it will slow down the speed of the mouse movement when mouse Pointer an the button or other contrails. + Visibility Page is page contains 2 properties for you to configure, which will change the feature of mouse visibility.
ish Enable this feature, the Typing shape pointer will automatically vanish on typing. 2. Pointer Warp Enable this feature, the pointer will move onto the opposite of the screen automatically. + Productivity page This page contains 2 properties for you to configure, which are Click Lock and Orientation. 1. Click Lock able this feature, you only single click the left button and move the pointer in stead of hold down the button.
Wheel page This page contains 2 properties for you to configure the Wheel and Wheel button, « Wheel Turn on the Wheel, you can scroll vertically or horizontally (if vertical scroll not exist). You can also adjust the scroll speed or reverse the scroll direction by pressing the ‘settings’ button. 1. Direction Enable this feature to se the direction of scroll. 2. Scrolling Select scroll several lines or one screen at a time.
Wheel button ces sss features for this button. 1 ad nig A sob ores sin The default feature for Wheel button is Auto scroll. By single click this button, an Auto scroll indicator will appear. Click the Wheel button again to release the Auto-scroll feature.
You can also adjust the scrolling speed or change the cursor color by Pressing the ‘settings’ button. 2.
RRR RR SE Set Wheel button as F1 key. Windows Explorer Click Wheel button to launch Windows Explorer AP. 5. Start Menu Menu sss Set Wheel Start Key. n as Windows 4E Easy Jump RR EE Click Wheel button, an Tool Pad contains twelve commonly used tasks under Windows 95 or Internet browser. Select one of enabled button to activate the corresponding function.
Backward Return to previous page. My Application Menu Popup an user defined Application menu. Stop Stop down load. Start Activate Windows start button. Vertical Scroll Move pointer to vertical scroll bar. Horizontal Scroll Move pointer to Horizontal scroll bar. Resize Move pointer to size grip.
Installation of the Mouse Driver for DOS, Windows 3.1 *Under the DOS environment 2. Insert the diskette in the floppy drive Change the directory “Dir” to the floppy drive at the prompt. Aor B: ¢. Run INSTALLMENT. d. Remove the diskette. e. Restart the system. *Under the Windows 3.1 environment a, Insert the diskette in the floppy drive (A: or B:). b. Change the directory “Dir” to the floppy drive at the prompt. Ar Orb: c. Run WSETUP.EXE. d. Remove the diskette. e. Restart the system.
How fo use the Mouse Driver for DOS 1. Loading the Mouse Driver for DOS a. The Mouse Driver for DOS will install in the directory in your Hard Disk Drive after INSTALLMENT on the Driver Disk has been run. b. The Driver files can be copied or moved to any directory desired. ¢. To load the driver into memory, change the directory to the path of the Mouse Driver. Enter the command “AMUSE” at the DOS prompt. The Mouse Driver will be loaded into memory. 2.
operation Guide for the Mouse Driver fo 1. About the Mouse Driver for Windows 3.1 a, The Mouse Driver can be found in the Windows 3.1 directory tree in after “INSTALL EXE” on the Driver Disk has been executed, or after “SETUP” within the windows environment has been executed. b. The Driver files can not be moved to another directory. ¢. Windows 3.1 will load the Mouse Driver automatically with system boot. Operation Guide for the Mouse Control Panel for Windows 3.
Nisei Sang yo Co., Ltd. Subsidiary of Hitachi, Ltd. Shin Kan Chung San Bldg 10FL., 44, Sec.2, Chung San N. Rd., Taipei, 104 Taiwan, R.O.C. Service Center: CANT New Tech. Corp. 4F. No.112, Chen-Kuong Rd., San-Chung City, Taipei, Taiwan, R. O. C.