User's Manual

Materials Required • Local Area Receiver (p/n 806A5301); includes antennas, Caddy
clip and mounting hardware.
• Facility fl oor plan indicating LAR position and network wiring
path.
• 105 Ω network terminator (p/n 805A2401) required to terminate
network. Two provided with each Controller (p/n 805A2201).
Important Reference Documents • Hugs Installation Manual (p/n 805I0301) • MyCall/FindIt Installation Manual (p/n 805I0401)
Materials Required Important Reference Documents
Have
you:
• Pulled network and power cable? • Resolved power supply requirements? • Selected the location for the LAR?
LAR Orientation
• Main antenna should be pointing downward into
an area free of metal obstructions.
• Ensure that the LAR is at least 2 ft. (60 cm) from
metal objects, such as framing or air ducts.
Specifi cations
Warranty Xmark’s products are warranted against defects in materials and workmanship and shall perform in accordance with published speci- fi cations for a period of one year. Instantel Inc. reserves the right to change specifi cations without notice. Limitation of Liability This Product has been designed for use to assist personnel in sum- moning help when they are under personal duress and/or locate assets. The range, accuracy, function and performance of this Product may vary from the published specifi cations due to many factors, including, without limitation, site impairments from structural effects, metal objects in the vicinity, placement of the receiver and transmitter, interference from other electrical devices, atmospheric effects, installation, and maintenance. There may be other factors, which also affect performance of this Product. Instantel does not guarantee that this Product will detect 100% of the calls for personal assistance and locate all assets 100% of the time. Instantel does not guarantee that this Product will not return false reports of calls for personal assistance and/or location of assets. Monthly testing and maintenance of this Product, as described in the Product documentation, is essential to verify the system is operating correctly and to ensure that the probability of detecting an alarm and/or locating the transmitter are maximized. The failure to undertake regular testing and maintenance will increase the risk of system failure and failure to report personal duress calls and/or failure to locate assets. The failure to undertake regular test- ing and maintenance will increase the risk of false reports of calls for personal assistance and/or location of assets. Instantel hereby disclaims all warranties, express or implied, arising out of or in connection with any of its Products of the use or perfor- mance thereof, including but not limited to, where allowable by law, all other implied warranties or conditions of merchantable quality and fi tness for a particular purpose and those arising by statute or otherwise in law or from a course of dealing or usage of trade. Instantel’s liability to you or anyone claiming through or on behalf of you with respect to any claim or loss arising out of the use or misuse of Instantel’s Product, defective products or materials, improper
installation or maintenance of Instantel’s Product or products or the system in which they are incorporated, or alleged to have resulted from an act or omission of Instantel or any person, negligent or otherwise, shall be limited to: A) The repair or replacement of defective Product or materials sup-
plied by Instantel during the warranty period as set out in the Product documentation; or, at the option of Instantel,
B) Refund of the purchase price of the Product supplied by Instan-
tel.
In no event shall Instantel be liable for general, specifi c, indirect, consequential, incidental, exemplary or punitive damages or any losses or expenses suffered by you or anyone else, whether or not Instantel, or its employees, offi cers, agents, resellers or installers has been informed of the risk of such loss or expense and whether or not such losses or expenses were foreseeable. Statements United States—Federal Communication Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause unde- sired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor- dance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Changes or modifi cations not expressly approved by Xmark could void the user’s authority to operate the equipment. Canada—Industry Canada The term “IC:” before the certifi cation/registration number only signifi es that Industry Canada technical specifi cations were met. European Union—CE declaration Xmark hereby declares that this radio frequency receiver is in compli- ance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Service Light The service light is located beside the secondary antenna, and indi- cates the current status of the LAR, as shown in the table below.
Part Number 806A5301
Local Area Receiver Guide
© 2005 Xmark, a division of Instantel Inc. All Rights Reserved.
FindIt,
MyCall
and Hugs
are
registered trademarks of Instantel Inc. in North America. Xmark and the Xmark logo are trademarks of Instantel Inc.
All other company and product names may be trademarks of their respective compa-
nies.
Printed in Canada. February 2005.
806U5301 Rev 01
.
808 Commerce Park Drive, Ogdensburg, NY 13669 USA or 309 Legget Drive, Ottawa, ON K2K 3A3, Canada
Telephone: 1-866-55-XMARK International: [phone] Facsimile: 1-613-592-4296
E-mail: [e-mail] Web Site: www.xmarksystems.com
Certifi ed to the ISO 9001 Quality Standard
If you answered, “No,” to any of these questions, refer to the MyCall/FindIt Installation Manual before installing.
LED state Meaning Off Normal operation. Flashing every 0.5 sec.
Unconfi gured LAR. Run Auto Confi gure in the LonWorks Device Installation dialog box.
On Hardware failure. Download fi rmware to the LAR from
the LonWorks Device Installation dialog box.
Frequency 433.42 to 434.42 MHz Supply Voltage 10-30 VDC Current Draw 60 mA @ 12 / 24 VDC, 100 mA max. Detection Radius 50 ft. (15 m) overlapping LARs
35 ft. (11 m) stand-alone LARs
Communications LonWorks two wire Temperature Operating: 32°F to 120°F (0°C to 49°C)
Storage: -22° to 158° F (-30° to 70°C)
Humidity 0-85% RH @ 70°F (21°C), non-condensing Dimensions Approximately 5.2 x 3.3 x 1.5 in. (133 x 84 x 38 mm) Weight Approximately 9.2 oz. (260 g)
Read these instructions thoroughly before installing the Local Area Receiver. Faulty installation can lead to system failure.
DRAFT