2604 User Guide 24th November 2003 2604 User guide This document is to be used with Baracoda Barcode Scanners : BC2604 BL2604 BLR 2604 1 Package contents Check that you have the following items. Contact your reseller if any item is missing.
604 User Guide 24th November 2003 Table of content Package contents ..................................................................................................................... 1 Interface ................................................................................................................................. 3 Installing / replacing batteries ................................................................................................... 3 Quick Start up guide .......................
24th November 2003 2604 User Guide 2 Interface The 2604 is easy to use. Simply press the trigger to scan a barcode. The colour of the LED indicates the status of the device. A beep indicates when the scanner connects to the remote device and when a barcode is scanned successfully. Acknowledgement of a completed scan is configurable by the user. Barcodes can be transmitted in real time or stored for later transmission to remote host devices/terminals using Bluetooth wireless technology.
24th November 2003 2604 User Guide 4 Quick Start up guide Find below how to quickly verify that your scanner is working correctly, using the BaracodaManager: 1- Make sure that your host device (PC or PDA) is bluetooth enabled. If not, please contact your reseller. 2- Install the BaracodaManager. (update can be downloaded from http://www.baracoda.com/download. ) Make sure that your Bluetooth software is compatible with BaracodaManager. For instructions, see the BaracodaManager user guide.
2604 User Guide 5 24th November 2003 Status Display Summary The LED color indicates the operating mode: Red Orange Green Full memory or empty battery Batch mode Real time mode LED Blinking indicates RF status Single Blinks (e.g. *pause*pause*…) Double Blinks (e.g.
2604 User Guide 6 24th November 2003 Configuring your scanner There are two (2) ways to configure your scanner: When connected to host device, you can use the BaracodaManager for multiple settings (refer to BaracodaManager documentation). Else, you can use configuration barcodes (refer to the programming guide). To reset the scanner to its “default settings”, use BaracodaManager Software (should you experience any problems, please contact your reseller). 6.
2604 User Guide 6.3 24th November 2003 Symbology You can enable/disable type of barcode decoders with both the BaracodaManager and the programming guide. Default settings enable all following symbologies: UPC A/E, EAN-8/JAN-8, EAN-13/JAN-13, code 39, code 93, interleaved 2/5, Codabar, Code 128. 6.4 Data format 6.4.1 Acknowledgment: You are given an acknowledgment if the scan is successful. You can configure or disable the scanner acknowledgement through BaracodaManager.
2604 User Guide 7 7.1 24th November 2003 Other functions Sniff period The higher the Sniff period is, the higher is the latency and the smaller is power consumption. Default value is 150ms. 7.2 Low battery A red blinking LED indicates that the battery level is low. Recharge batteries. When the LED is continuously red, you can no longer scan barcodes. • How to recharge the battery Plug the cradle connector into the AC wall adapter, then place the 2604 in the cradle.
2604 User Guide 8 24th November 2003 Technical specifications STANDARD Fully compliant with Bluetooth 1.1 standards GAP & SPP profiles USER INTERFACE Tri-color LED (red, orange, green) Buzzer PHYSICAL Length: 5.63 in (143 mm) Width: 3.10 in (78.8mm) Heigth:6.08 in (154.5 mm) Weight (without batteries): Batteries weight : 1.90oz (54g) BC2604 6.98oz (198g) BL2604 6.42oz (182g) BLR2604 7.
2604 User Guide 24th November 2003 ENVIRONMENT Operation temperature: 32°F (0°C) – 122°F (50°c) Storage temperature: 14° F (-10°c) – 140°F (60°c) Operating humidity: 10% - 90% (no-condensing) Storage humidity: 5% - 95% (no-condensing) Shock: 3.
2604 User Guide 9 24th November 2003 Safety & Regulatory Information FCC Declaration of Conformity This device complies with part 15 of FCC rules. Operation is subject to the following conditions : (1) this device may not cause harmful interference (2) this device must accept any interference received including interference that may cause undesired operations. This applies to all product options.
2604 User Guide 24th November 2003 Limited Warranty Manufacturer warrants that the product will be free of defects in material and workmanship for one (1) year from the date of shipment. Manufacturer will, at its option, either repair, replace or refund the purchase price paid by buyer for the defective products. Such repair, replacement or refund shall be buyer's sole remedy in the event of Manufacturer's breach of this limited warranty.
