XT1520 Product Manual XT1520 Product Manual Firmware Version: NV11.
XT1520 Product Manual TABLE OF CONTENTS 1. Functional Description 3 1.1. Overview 3 1.2. Mechanical 3 2. General Operation 4 3. Installation 5 4. Bluetooth (BLE) 6 4.1. UID Frame 6 4.2. TLM Frame 6 5. Bluetooth protocol Diagram 7 6. Regulatory Statements 8 6.1. FCC 8 6.2. IC 9 6.3.
XT1520 Product Manual 1. FUNCTIONAL DESCRIPTION 1.1. OVERVIEW The XT1520 series are Bluetooth beacons with a single chip Bluetooth 5 + ARM. The beacons allow the user to quickly identify a cart's location if it is within proximity of an XT49xx to determine whether a cart is at a distribution center or en route. Each device broadcasts a UID frame payload with a MAC address to an XT49xx at a 1 Hz frequency. This frequency, along with the namespace, are only configurable at the factory.
XT1520 Product Manual 2. GENERAL OPERATION The XT1520 attaches to Amazon carts and is used in conjunction with an XT49xx mounted on an Amazon trailer. The XT49xx periodically captures the unique device IDs at a configurable rate of all beacons in range. The XT49xx then sends the information over the cellular network, which is received by AWS.
XT1520 Product Manual 3. INSTALLATION The XT1520 offers two different means of mounting: zip ties, or 3M VHB tape. The back of the device casing is flat so the VHB tape can be adhered. The holes zip ties are indicated below.
XT1520 Product Manual 4. BLUETOOTH (BLE) The XT1520 uses Bluetooth 5 network, utilizing the Eddystone(TM) message protocol from Google. This protocol has four frame types: UID, URL, TLM, and EID; however, URL and EID frames are not utilized in this application. In depth information on Eddystone(TM) can be found here: https://developers.google.com/beacons/eddystone 4.1. UID FRAME This frame type is very important in the XT15 as it comprises the primary functionality of the device.
XT1520 Product Manual 5.
XT1520 Product Manual 6. REGULATORY STATEMENTS 6.1. FCC This equipment with FCC-ID: GKM-XT1520 and IC-ID: 10281A-XT1520, Model: XT1520 is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules. NOTICE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
XT1520 Product Manual 6.2. IC Antenna Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
XT1520 Product Manual WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California to cause cancer and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.