Content Content…………………………………………………….……......1-2 Welcome to use H39 Bluetooth headset..…………………………….3 Introduction………………………………………………………....…4 Bluetooth headset illustration……………………………………....…..4 Using guide ①Charging Your Headset Battery………………………...…..... …….6 ②How to Power On/Off Your Headset.……….……………………….7 ③Pairing Your Headset with Phone.………………….... …………...7-8 ④Pairing to additional devices and Adjust Headset Volume…. …….
⑤Wearing your headset.….……………………………….…..…....11 ⑥Communication Function……………………………………...12-13 Using Your Headset Indicator LED…………………………………14 Audio frequency Alarm……....…………………..…………….……15 Troubleshooting.......……………………………………………..
Welcome to use H39 Bluetooth headset H39 wireless Bluetooth headset surpass the tradition. It is compact, small and lightweight, also easy to use. Bluetooth V2.0 transmit more fast, voice quality better and high ability to avoid interference, Although you don’t need wire connect anymore, you will more close with the pioneer global Bluetooth science and technology. Free to communicate with others. Please read this manual carefully before using and keep it for future reference.
Introduction What is Bluetooth Wireless Technology? Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. Your Bluetooth wireless headset can communicate with other Bluetooth devices within a range of approximately 10 meters (33feet). How to use the Wireless Headset? Your Wireless headset, with Bluetooth technology, lets you connect with other similarity equipped devices.
Volume down Multi-function key Volume up Receiver Charging port Rotatable ear hook State indicator light Microphone 5
Using guide: ①Charging z Charging First Time Use-Before you can use your headset, charge its self-contained battery for more than two hours. Recharging-when you hear five rapid high tones through the headset speaker, repeats at 20-second intervals, the headset battery needs recharging. Charge it until the red LED goes out. Fully charged will cost about 2 hours. when you are in a car, you can use the original car charger to charge the device.
●How to Power On/Off Your Headset To Power Your Headset On Steps: Press and hold the Multi-function key for 5 seconds until the blue LED flashes rapidly. To Power Your Headset Off Steps Press and hold the Multi-function key for 3 seconds until the red LED flashes rapidly. ●Pairing Your Headset with Phone Note: You must pair your headset and phone before making a call. “Pairing” creates a link between devices with Bluetooth wireless technology, and allows the phone to remember the headset’s unique ID.
Pairing: Steps: 1, Place the headset and phone together, With the headset off, hold the multifunction Button until the LED remains on (about 8 seconds),it means it has entered the pairing mode. 2,Performa device discovery for your phone, refer to the phone’s user manual . When the scan is complete, the phone displays the devices have been searched.. 3,Select the logo and model number from the discovered devices list and confirm the following on screen prompts.
Pairing with additional devices The headset can store pairing information for up to eight different devices through Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in the order entered. When an attempt to pair with more than eight devices, the former paired device will be removed from the list. Any of the eight paired devices can initiate a connection to the headset.
How to wear the Bluetooth headset 1,Wear the headset in the ear. Actually, The capability is better than there is Something interruption (including your body) 2,Just adjust the direction of the ear hook while you want to put the headset in left/right ear. As the picture shows. 3,To change the volume ,please see: “Adjust headset volume” on page 26 for reference.
Communication Function Your headset supports both hands-free and headset profiles. Accessing call functions depend on which profile your phone supports. Note: Some phone do not support all features listed. See your phone user manual .
Function State (Mobile phone) State (headset) Operation Steps (headset) short press End a call on---on a call on the multi-function Key keep one call on---on a call on hold the Multi-function key on---phone rings on the Multi-function Key waiting short press Receive a call (calling available) Reject a call Answer the 2nd Incoming call on---phone rings On-0n a call, the 2nd call comes in on hold the Multi-function key on hang on the 1st call and receive the hold the Multi-function key t
Indicator light With charger plugged in: Headset Indicator On Off Status Charging in progress Charging complete Without charger plugged in: Headset Indicator Off ON (Steady) 10 rapid flashes Flashes at a 3-second interval (1. seconds ON2.9 seconds OFF) Pulses at an 8-second interval (2.0 seconds ON6.
Audio Tones Audio Tone Single high tone when pressing volume button Five rapid high tones, repeated every 20 seconds No audio indications, deteriorating communication quality Ring tone Single high tone Single low tone No tone 14 Headset Status Volume maximum or minimum reached Low battery Out of range Incoming call Pairing confirmation Initiate voice activation Power ON/OFF
Troubleshooting When the Bluetooth headset can not be connected with the mobile phone, please do as following: ● Make sure the Bluetooth headset was turned on and was paired with the handset. ● The Bluetooth function was startup. ● Check that the distance between the handset and Bluetooth headset over 10 meters or not, or weather there are some stumbling blocks between them, such as walls or other electronic equipments. ●The paired Bluetooth list maybe full of message.
Care and Maintenance Your Bluetooth headset is a product of superior design and craftsmanship that should be treated with care. The suggestions below will be helpful for your warranty coverage. ● Keep all accessories out of the place that can be reached by little children. ● Keep the device dry. Rain water、humidity and all types of liquids or moisture may contain minerals that will corrode electronic circuits, if your headset does get wet, please use it after completely air it.
device returns to its normal temperature, moisture will be formed inside the device and damage the electronic circuit board. ●Do not attempt to drop 、knock or shake the device, Rough handling will damage the inside circuit board and the precious structure. ●Do not use the harsh chemicals 、 cleaning solvents or strong detergents to clean the device. ●Do not paint the device, painting may clog the moving parts and prevent proper operation.
FCC Warning Statement This device compiles with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
redialed output power of this product is far below the FCC radio frequency exposure limits.