i-400; i-350 Product Information Guide
Compatible Mobile Phones The following model types of mobile phone can be charged by the base via the USB connector: HTC: HD2/ Incredible S/ Desire S Samsung: Galaxy S/ Galaxy SⅡ Moto: MB860 Lenovo: LePhone TCL: A919 21
Technical Specifications Bluetooth Compliance Bluetooth Specifications version 2.1 Frequency Band 2.4GHz ISM Spectrum; frequency hopping 79 channels Modulation GFSK (Gaussian Frequency Shift Keying) RF Power Class 2, -6-6dBm Operating Range Up to 10m (indoor) Connection Point-to-Point Security Security mode 3 (pairing, encryption, authentication) Power Supply Base input: 7.5V, 1.
Introduction Thank you for purchasing the BT handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with iPhone. The BT handset is Bluetooth V2.1 compliance. It is backward compatible with audio devices with V2.0 or earlier. Its operation range is up to 10 meters (indoor); operating power mode is Class 2 (-6-6dBm). This Information Guide provides more details.
Symptom Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the handset and the iPhone cannot be automatically resumed. 18 Solution Due to differences in each iPhone's software, so it is normal for some iPhone that the Bluetooth connection cannot be automatically resumed. If in this case, please establish the Bluetooth connection manually (See P11 "Connecting an iPhone").
Contents Chapter 4: Additional Information Chapter 1: Getting Started Troubleshooting 6 Package Contents 7 BT Handset Overview 8 Connecting Symptom The handset doesn't turn on.
LED Indicator Chapter 4: Additional Information 17 Troubleshooting Red LED (Charging indicator) Handset Status During the charging 19 Care and Maintenance LED Status ON (steadily) 20 Technical Specifications 21 Compatible Mobile Phones Note: FCC Warning Fully charged OFF Blue LED (Bluetooth indicator) Handset Status Power ON (unconnected) Standby (connected) LED Status Flashes at 1.5 seconds interval (0.5 seconds ON, 1 second OFF) Flashes at 3.5 seconds interval (0.
Chapter 1: Getting Started Muting a Call Package Contents During a conversation, you can temporarily mute the microphone so that the party on the other end of the line cannot hear you. You can still hear the other party. This enables you to converse privately with someone near you. Once you have unpacked your BT handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. To mute the microphone, press and hold - button for about 2 seconds.
BT Handset Overview Note: To use this feature, the BT handset must be paired and connected to the iPhone beforehand. For more details, please refer to Bluetooth Settings section. Handset Earpiece Receiving a Call Volume controls To answer a call, after the handset rings, press MFB to accept the call. You can also answer the call using the iPhone. Rejecting a Call LED indicator To reject an incoming call, after the handset rings, press and hold MFB for about 1 seconds.
Connecting Chapter 3: Operations Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. Making a Call Using the iPhone Make calls on the iPhone in normal ways. Voice Dialing If the iPhone supports voice dialing, press MFB twice on the BT handset within 0.8 seconds. When a beep occurs, say the desired number. To AC wall outlet Charging BT Handset & iPhone The BT handset has a built-in rechargeable Li-Polymer battery.
Disconnecting an iPhone Other Mobile Phones When not using the handset with the iPhone, they can be disconnected as follows: To charge some other mobile phones, plug the connector in the USB port on the base, then plug the other connector in the port of your mobile phone. For more information about the compatible model, please see page 21. Method 1: Power off the handset. After that, Not Connected appears to the right side of i-350 on the iPhone screen.
Chapter 2: Bluetooth Settings Connecting an iPhone Pairing with an iPhone Although two iPhones can be paired with the BT handset, only one iPhone can be connected to the base and be engaged in a call at one time. To use an iPhone with your BT handset, you must first pair and connect the iPhone with the BT handset. 1 Place the BT handset and the iPhone close to each other, within about a meter. 2 Turn on the Bluetooth feature of your iPhone.
i-500; i-450 Product Information Guide
Technical Specifications Bluetooth Compliance Bluetooth Specifications version 2.1 Frequency Band 2.4GHz ISM Spectrum; frequency hopping 79 channels Modulation GFSK (Gaussian Frequency Shift Keying) RF Power Class 2, -6-6dBm Operating Range Up to 10m (indoor) Connection Point-to-Point Security Security mode 3 (pairing, encryption, authentication) Power Supply Base input: 7.5V, 1.
Introduction Thank you for purchasing the BT handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with iPhone. The BT handset is Bluetooth V2.1 compliance. It is backward compatible with audio devices with V2.0 or earlier. Its operation range is up to 10 meters (indoor); operating power mode is Class 2 (-6-6dBm). This Information Guide provides more details.
Symptom Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the handset and the iPhone cannot be automatically resumed. 18 Solution Due to differences in each iPhone's software, so it is normal for some iPhone that the Bluetooth connection cannot be automatically resumed. If in this case, please establish the Bluetooth connection manually (See P11 "Connecting an iPhone").
Contents Chapter 4: Additional Information Chapter 1: Getting Started Troubleshooting 6 Package Contents 7 BT Handset Overview 8 Connecting Symptom The handset doesn't turn on.
LED Indicator Chapter 4: Additional Information 17 Troubleshooting Red LED (Charging indicator) Handset Status 19 Care and Maintenance LED Status During the charging ON (steadily) Fully charged OFF 20 Technical Specifications Note: FCC Warning Blue LED (Bluetooth indicator) Handset Status Power ON (unconnected) Standby (connected) LED Status Flashes at 1.5 seconds interval (0.5 seconds ON, 1 second OFF) Flashes at 3.5 seconds interval (0.
Chapter 1: Getting Started Muting a Call Package Contents During a conversation, you can temporarily mute the microphone so that the party on the other end of the line cannot hear you. You can still hear the other party. This enables you to converse privately with someone near you. Once you have unpacked your BT handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. To mute the microphone, press and hold - button for about 2 seconds.
BT Handset Overview Note: To use this feature, the BT handset must be paired and connected to the iPhone beforehand. For more details, please refer to Bluetooth Settings section. Handset Earpiece Receiving a Call Volume controls To answer a call, after the handset rings, press MFB to accept the call. You can also answer the call using the iPhone. Rejecting a Call MFB LED indicator To reject an incoming call, after the handset rings, press and hold MFB for about 1 seconds.
Connecting Chapter 3: Operations Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. Making a Call Using the iPhone Make calls on the iPhone in normal ways. Voice Dialing To AC wall outlet Charging BT Handset & iPhone Call Switching between the BT Handset and an iPhone The BT handset has a built-in rechargeable Li-Polymer battery. Before initial operation, fully charge the BT handset for 6 hours or more.
Disconnecting an iPhone Battery Use and Care When not using the handset with the iPhone, they can be disconnected as follows: If treated with care, a rechargeable battery has a long service life. A new battery, or one that has not been used for a long period of time, could have reduced capacity the first few times it is used. Method 1: Power off the handset. After that, Not Connected appears to the right side of i-450 on the iPhone screen.
Chapter 2: Bluetooth Settings Connecting an iPhone Pairing with an iPhone Although two iPhones can be paired with the BT handset, only one iPhone can be connected to the base and be engaged in a call at one time. To use an iPhone with your BT handset, you must first pair and connect the iPhone with the BT handset. 1 Place the BT handset and the iPhone close to each other, within about a meter. 2 Turn on the Bluetooth feature of your iPhone.