Troubleshooting Check&Remedy Symptom Nothing appears on LCD display l l l No operation l l No LED indicator Cannot work 25 l Check that the LCD display is connected to base unit properly. Check that the base unit is connected to cigarette lighter properly. Check that the base unit is connected to cigarette lighter properly. Check that the base unit is turned on. Check the pairing is successful. l Check that the base unit is connected to cigarette lighter properly.
Care and Maintenance Contents Introduction 1 Feature List 3 Safety and General Information 4 Before Using 6 Package contents 6 Turning the unit on/off 7 Installing the unit in a vehicle 8 Location of Controls 9 Function Operations 11 Pairing 11 Adjusting speaker volume 13 Adjusting ringer volume 15 Your advanced BT-201 is a product of superior design and should be treated with care. The suggestions below will help you to enjoy your product for many years. l Keep the product dry.
Status Indicators Status Pairing mode Standby mode Turn on /off the unit by pressing MFB Power up the unit In talk mode 23 Indicators The Red LED and Blue LED flash alternately. The Blue LED flashes per 3 seconds. The Blue LED flashes 4 times rapidly. The Red LED and Blue LED flash alternately once, then the Blue LED flashes 20 times rapidly. The Blue LED flashes every second.
Introduction Caller ID System Operations Your Bluetooth wireless product BT-201 Transferring a call (continued) The Bluetooth wireless product BT-201 is developed for installation in motor vehicles to enble handsfree operation of your mobile phone. It is base on Bluetooth wireless technology connects to a compatible phone without wires. It is easily convert your mobile phone communication into this in-car solution, talking through its high quality speaker and microphone. 3.
Caller ID System Operations Introduction Calling back the last 5 incoming numbers What is Bluetooth wireless technology(continued) 1. In Standby mode, press Volume Up or Volume Down button repeatedly to select the number you want to call back. Bluetooth wireless product BT-201 can connect to other Bluetooth devices within a range of approximate 10 metres. Volume Down 2. Press MFB once to call back. Volume Up Press this button once.
Feature List Caller ID System Operations 1. Bluetooth compatible When a call is received, the LCD display shows caller's number, if your local telephone company provides the Caller ID service. The last 5 incoming numbers will be saved in the Caller ID list, and you can use the list to dial the numbers. If the storage is full, the oldest number will be replaced by the new one. 2. Up to 10 metres range 3. LCD displays calling numbers 4. Talk time dislpay VOL 5. Full duplex 05926036442 6.
Function Operations Safety and General Information Rejecting a call Important information on safe and efficient operation. Read this information before using your device. When a call is received, the unit rings and the LCD display shows the caller's number. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Safety and General Information Function Operations Medical devices Hearing aids Ending a call Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Press MFB once. OR End call from your mobile phone's keypad. Other medical devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy.
Function Operations Before Using Making a call (continued) Package contents l Once you have opened the gift box, check to make sure that you have all the parts shown below. If any piece is missing or broken, please call your dealer. In voice-dialling mode, you can press MFB and V olume Up button concurrently no less than 1.6 seconds to disable the voice-dialling function.
Before Using Function Operations Turning the unit on/off Note: l When you use Volume Up or Volume Down button of the unit to adjustment the ringer volume, your mobile phone's ringer volume may be adjusted accordingly(depending on your mobile phone). When you turn on the ignition of your car, the unit is turned on automatically. Then the Red and Blue LEDs flash alternately once and then the Blue LED flashes 20 times rapidly, meanwhile a continuous line flashes on the LCD display.
Function Operations Before Using Adjusting ringer volume Installing the unit in a vehicle When a call is received, the unit rings. At the moment you can press Volume Up or Volume Down button or use your mobile phone(depends on your mobile phone) to adjust the ringer volume. There are 5 levels for adjusting. During adjusting, the icon varies according to the volume levels. The more bars, the higher the volume. 1. Insert the plug of coil cord into the coil cord jack on the base unit.
Location of Controls Function Operations Base unit Adjusting speaker volume(continued) 2 . P r e s s V o l u m e D o w n b u t t o n t o OR Use the volume down switch of your mobile phone to decrease speaker decrease speaker volume. See volume (depending on your mobile figure 2. phone). Adjuster Press this button to increase the speaker volume. Volume Up Multifunction Button (MFB) and LED indicator Figure 1 Volume Down Press this button to decrease the speaker volume.
Function Operations Location of Controls Pairing(continued) Display unit Function match. Then theOperations phone will remind you Note: After the unit enters pairing mode, if there is no device linked within 2 minutes, the unit will return to Standby mode. to enter passkey. The default passkey is " 0000 ". Please refer to the user's manual of your mobile phone for "pairing process". l VOL l If the pairing is successful, the LCD display shows " VOL " and the unit enters Standby mode.
Function Operations Function Operations Pairing Pairing(continued) Your BT-201 can store pairing information for up to five different devices equipped with Bluetooth wireless technology. When an attempt to pair to more than five devices is made, the oldest paired device is removed from the memory. 1. Press and hold MFB until a prompt tone is heard to indicate the unit is turned off. (When the unit is in Standby mode.