Amplidect350 Amplified Cordless Telephone English 0
CONTENTS CONTENTS 1 INTRODUCTION Unpacking 4 5 DESCRIPTION General Description Keys Description LCD Window Icons Description 6 6 11 14 INSTALLATION Connecting Lines Installing Batteries Charging Handset Using Handset Carrying Clip Using Headset (optional) Base Ringer Volume Switch 15 15 16 18 19 20 20 HANDSET SETTINGS Turning Handset On/Off 21 21 BASIC FUNCTIONS Making a call 23 23 1
CONTENTS Receiving a call Muting the Microphone Amplification Function Menu Navigation Menu Map Handset Ringer Setting Last Number Redial CID Book Flashlight Key Lock Auto Answer Selecting a Language HS Name Range Alarm Paging Dial Mode Handsfree Flash Signal 24 25 26 27 28 29 30 32 35 35 36 37 38 39 40 41 42 43 ADVANCED FUNCTIONS Phone Book One-Touch Memories HS Settings 44 44 49 51 2
CONTENTS BS Settings Registration Calling with more than one Handset Caller ID on call waiting 59 62 63 65 FEATURE LIST TROUBLESHOOTING TECHNICAL SPECIFICATIONS SAFETY INFORMATION REGULATORY COMPLIANCE GUARANTEE 66 68 69 71 73 78 3
INTRODUCTION Congratulations on purchasing your Geemarc Amplidect350 telephone. This telephone offers all the advantages of cordless technology (compliant with Digitally Enhanced Cordless Telecommunications-DECT standard) together with an easy to see big button keypad, ideal for those who suffer with poor sight. This telephone is also hearing aid compatible. Its is important that you read the instructions below in order to use your Geemarc telephone to its full potential.
INTRODUCTION Unpacking When unpacking the telephone, you should find the following in the box: y y y y y y y 1 Amplidect350 handset 1 Amplidect350 base 1 Mains power adaptor 3 AAA Ni-MH Batteries rechargeable type 1 Telephone line cord 1 Carrying clip 1 User Guide * The shape of the plugs can vary according to each country’s specification. Sonic Alert Warranty Center 1081 West Innovation Dr.
DESCRIPTION General Description Handset Description (front) Visual ringer Earpiece One-touch Memories M1, M2, CS & M3 Up/CID key Int key Display Right soft key Left soft key Redial key Dial/ Speaker key End key Alphanumeric keys * Down /Phonebook key key Keypad locked function Microphone 6 # key Flashlight function Vibrator Function
DESCRIPTION Handset Description (Rear) Carrying clip Speaker Battery compartment cover Charging contacts 7
DESCRIPTION PRIOR TO USE Handset Description (Side) Volume Control Amplify (AMP) Button Headset Jack 8
DESCRIPTION Base Description (Top) : Charge pins Page button In use indicator flashes when you press the key. It also flashes when you page the handset. 9 Charge indicator lights steadily while the handset is charging.
DESCRIPTION Base Description (Base) Phone Line Jack Mains power adaptor Ringer volume switch 10
DESCRIPTION Keys Description Dial/Speaker key Make/Answer a call. Activates the speakerphone if pressed during a call, as described in page 42. End key End a call. Long press to activate power on/off, as described in page 21. Navigation key: Up/CID key Scroll up through lists and menu options. Increase the earpiece/speakerphone volume during a call. Enter the CID book, as described in page 32. Down/Phonebook key Scroll down through lists and menu Decrease the earpiece/speakerphone volume during a call.
DESCRIPTION DESCRIPTION Int key Set up an internal call to another handset. Transfer an incoming call to another handset. Set up a conference call with an external line and an internal handset. Redial key Enter the redial book, as described in page 30. Insert a pause when pre-dialing a number. Left/Right soft key Perform the functions indicated by the text immediately over it (on the bottom line of the display) which changes time by time. key Press and hold to turn on/off keypad lock function.
DESCRIPTION key In standby mode press and hold this icon appears to key until the activate the shaker and visual ringer function. Press and hold this key again until the icon disappears to deactivate it.
DESCRIPTION LCD Window Icons Description New Call Indicates you have missed one or more calls. MSG Waiting Indicates you have one or more voice messages. Off Hook Indicates the line is engaged. Hands-free Indicates the handsfree function is enabled. Battery Icon Indicates battery charge level. Shaker Icon Indicates the shaker and visual ringer is enabled. Signal Icon Indicates whether the current signal exists or not. If the handset is too far from the base, this icon will blink on the LCD.
INSTALLATION Connecting Lines 1. Connect one end of the phone line cord to the phone line jack of the base, and the other end to a standard phone wall outlet. 2. Connect the modular end of the AC power adapter to the power jack of the base, then plug the AC adapter into a standard AC wall outlet.
INSTALLATION Installing Batteries The rechargeable Ni-MH batteries (AAA size) come with your phone. Install the battery before using your phone. 1. Slide the battery cover in the direction of the arrow and pull it out. 2. Insert new batteries as indicated, matching correct polarity (+,-). Note: Reversing the polarity may damage the handset. 3. To replace the battery cover, slide the cover up until it snaps in place.
INSTALLATION Notes: The batteries need to be replaced if they do not recover their full storage capacities after recharging. When replacing the batteries, always use good quality Ni-MH re-chargeable batteries. Never use other batteries or conventional alkaline batteries.
INSTALLATION Charging Handset ! Important Note: Before initial operation, YOU SHOULD FULLY CHARGE THE HANDSET for about 15 hours. To charge the handset, you should place it on the base. Result: When you place the handset on the base, the handset automatically turns on and the Charge indicator lights during the charge.
INSTALLATION Using Handset Carrying Clip The supplied handset carrying clip allows you to conveniently carry the handset with you. It clips easily to your belt, waist band, or shirt pocket. If you want to remove the carrying clip: Insert a screw driver along the edge of one of its arms and release the clip. Then lift it off.
INSTALLATION Using Headset (optional) The headset jack is located on the left side of the handset and is a 2.5mm standard plug. Simply plug the headset into this jack and the headset will be activated. The recommended headset type number is MW-2. Earphone Microphone Headset Jack Clip Note: When the headset is plugged into the headset jack the microphone on the handset will be deactivated.
HANDSET SETTINGS Turning Handset On/Off If the handset is in power off mode, when you place the handset on the base, it automatically turns on. To turn the handset on or off in standby mode, follow these steps: 1. To turn on the handset when it's off, press and hold the key until you switch the display on. On power up, the handset will enter subscription mode and search for a registered base. A message as shown below will be displayed to the user, and the signal icon will flash. Searching... key pressed 2.
HANDSET SETTINGS Note: When battery power is very low, if you place the handset on the base, the display will show as below. YOU SHOULD FULLY CHARGE THE HANDSET BEFORE USING. Charging...
BASIC FUNCTIONS All descriptions in this manual assume that the handset is in standby mode. Set the telephone to standby mode by pressing the key. Making a Call 1. Pick up the handset and press the key. Result: The In use indicator flashes and the icon appears on the LCD. 2. Dial a telephone number. 3. To end the call, either press the the handset on the base. key or replace Note: To make a call to the last number you dialed, use the Redial feature. For details, see page 30.
BASIC FUNCTIONS Receiving a Call When a call is received, the New Call information will appear. If the caller can be identified, the caller's phone number is displayed. If the caller cannot be identified, only the New Call information displays. If you have a voice message, the be shown on the LCD. icon and "MSG WTG ON" will key. If you have 1. To answer the call, press the activated the Auto Answer function, when the handset is on the base, simply lift it up to answer. 2.
BASIC FUNCTIONS If the polyphonic ring tone (Melody 8~10) is set, the ring tone may continue for 4 seconds after the caller's hang-up or after the parallel phone had answered the call. Muting the Microphone During a conversation, you can temporarily switch your phone's microphone off, so that the other party cannot hear you. Example: You want to say something to another person in the room but do not want the other party to hear you. To mute your microphone, press the Mute soft key during the conversation.
BASIC FUNCTIONS Amplification Function CAUTION: This telephone can produce very high (loud) sound levels. Repeated incremental exposure to amplification levels greater than 18 dB may be harmful to people without hearing loss. Always adjust the volume control to the minimum setting after using the phone. Your phone is equipped with a specialized amplification function designed to fit your needs.
BASIC FUNCTIONS You can also use the Vol+ or Volcontrol in standby mode to adjust the ringer volume. Menu Navigation To access a menu option: 1. To display menu items, press the Menu soft key. 2. To scroll through menu options, press the or key repeatedly. 3. To select a menu, press the Select soft key when the desired menu appears on the LCD. 4. Repeat if necessary. To return to standby mode: If you press the Back soft key from any menu, the phone returns to the previous screen.
BASIC FUNCTIONS Menu Map 1. CID Book (see page 32) 2. Phonebook New (see page 45) Edit (see page 47) Delete (see page 48) Delete All (see page 48) PB Status (see page 48) 3. BS Settings Terminate HS (see page 59) Dial Mode (see page 41) Flash Time (see page 60) Modify PIN (see page 60) BS Reset (see page 61) 4.
BASIC FUNCTIONS Handset Ringer Setting You can select your own external (from the telephone Network) or internal (from other handsets registered to the same base) ring tone and adjust the volume. 1.Press the Menu soft key. or key to choose HS Settings 2.Press menu, then press the Select soft key. or key to choose Ring Setup, 3.Press press the Select soft key. 4.Press the Select soft key to choose INT Ring or press the key. key to choose EXT Ring, press the Select soft or key to choose Melody or 5.
BASIC FUNCTIONS Last Number Redial 1. Press the key or the Redial soft key in standby mode. Result: The LCD displays the last number you dialed. key to dial out the number. 2. Press the Your phone allows you to retrieve the last 10 numbers you have dialed and recall them quickly. Search for and dial a number in Redial Book 1. Press the Redial soft key in standby mode. 2. If you want to scroll through the memory, press key repeatedly until you find out the number or you want to dial.
BASIC FUNCTIONS Use Redial Book options Using the redial book options, you can add a number to phone book or delete a number in the redial book. 1. Press the Redial soft key. 2. Scroll to the desired number by using the or key. 3. When the number appears on the display, press the More soft key to choose the desired option: Add to PB: allows you to add the number to the phone book. Complete storing the entry by starting from step 4 described in part.
BASIC FUNCTIONS CID Book When you receive a call, if the caller's information is transmitted from the network on which the call was made (and the caller doesn't hide it), the caller's phone number is displayed. Moreover, if you missed one or more calls, the full, the icon will appear on the LCD. If the CID memory is icon will flash on the LCD.
BASIC FUNCTIONS 3. Use or key to view the numbers, you can make a call by pressing the also add the entry to the phonebook. key. You can Note: At step 3, each item of the incoming list is marked with the icon if the call has been reviewed or with the icon if the call hasn't been reviewed yet. Add CID Number to Phone Book 1. Press the Menu soft key. 2. Use the Select soft key to choose the CID Book. or key to view the numbers, when 3.
BASIC FUNCTIONS Delete a number in the CID Book 1. Press the Menu soft key. 2. Use the Select soft key to choose the CID Book. 3. Scroll to the number you want to delete by using key. or 4. When the desired number appears on the display, press the More soft key. or key to choose Delete, press the 5. Use Select soft key. The display will show "Confirm ?". Press the Del soft key to confirm, you will hear a beep and the LCD shows the next number. Delete all numbers in the CID Book 1. Press the Menu soft key.
BASIC FUNCTIONS Flashlight If you turn this feature on, the visual ringer will light steadily. You can use the phone as a torch. To turn on this feature, in the Standby mode just keep the key pressed till the visual ringer lights up. To turn off this function, keep the again till the visual ringer goes out. key pressed Key Lock If you turn on this feature, all keys will be locked except M1, M2, CS & M3. You can answer calls by using the key. But when you hang up, the phone returns to the locked mode.
BASIC FUNCTIONS To unlock the keys, keep the till the key lock icon key pressed again disappears from the display. Note: In locked mode, if you press any key, the phone will generate a warning tone, and the "HS Locked" message will be redisplayed. Auto Answer With this feature, you can answer a call by just picking up the handset from the base without pressing any key. 1. Press the Menu soft key. or key repeatedly to choose HS 2. Press Settings, press the Select key. or key to choose Auto Answer, 3.
BASIC FUNCTIONS Selecting a Language The handset supports up to 8 predefined languages: English, French, Spanish, German, Italian, Dutch, Russian and Polish. You can change the language used to display the menu messages. 1. Press the Menu soft key. or key repeatedly to choose HS 2. Press Settings, press the Select soft key. or key to choose Language, then 3. Use press the Select soft key. 4. The languages will be displayed. Use the or key to scroll through the options.
BASIC FUNCTIONS HS Name Using this feature, you can define a name to the handset in order to easily recognize your handset if you have more than one registered to the same base, but when you reset the handset, the handset name will be deleted. 1. Press the Menu soft key. or key repeatedly to choose HS 2. Press Settings, press the Select soft key. or key to choose HS Name, then 3. Use press the Select soft key. 4.
BASIC FUNCTIONS Range Alarm A beep will sound when the handset is out of range of the Base. You are able to select to enable/disable this audible warning. 1. Press the Menu soft key. or key repeatedly to choose HS 2. Press Settings, press the Select soft key. or key to choose Tone Setup, then 3. Use press the Select soft key. key to choose Range Alarm, then 4. Press the press the Select soft key. or key to choose On/Off to 5.
BASIC FUNCTIONS Paging You can page the handset from the base unit making it ring with a special tone. It's useful to locate a lost handset. Press the key on the base unit (less than 5 seconds), all the handsets registered to the base will ring for about 60 seconds. To stop paging, press the any key on the handset. key on the base again or Note: On a long key press, more than or equal to 5 seconds, the base will enter subscription mode. For details, see page 61.
BASIC FUNCTIONS Dial Mode You can select to change the dial mode by the following steps: 1. Press the Menu soft key. or key repeatedly to choose BS 2. Press Settings, and press the Select soft key. key to choose Dial Mode, then press 3. Press the the Select soft key. or key to select the 4. You can press required dial mode options (Tone/Pulse) and press the Save soft key. A confirm beep will be heard. Note: If you are not sure which dialing mode to select, please contact your local service provider.
BASIC FUNCTIONS Handsfree During a call, you may turn on the speakerphone built in the handset. In this mode you can simply put your handset on a surface (e.g. a desk) and enjoy the comfort of the handsfree conversation. To turn the feature on, press the during a call (line engaged). The the LCD. key icon appears on To turn the feature off, and keep on talking in normal mode, press the disappear. key again.
BASIC FUNCTIONS Flash Signal When the line is engaged, pressing the Flash soft key sends the Flash signal. This key is used in conjunction with special services (e.g. call waiting) which can be available from your phone network. For further details please contact your network telephone company. To use the said special services, just press the Flash soft key while the line is engaged: the display will show R.
ADVANCED FUNCTIONS Phone Book The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number. Character Map To enter a specific alphanumeric character, press one or more times the relevant key for the required character according to the following table: once for the first character, twice for the second and so on. Key 0 1 2 3 4 5 6 7 8 9 Characters in the displayed order (spc) 0 ? & / .
ADVANCED FUNCTIONS Adding the Phone book Entries 1. Press the Menu soft key. key to choose the Phonebook, press 2. Press the the Select soft key. 3. Press the Select soft key to choose New. 4. The display shows "Name ?". Enter the name you want to use, then press the Next soft key to confirm. The display shows "Number ?". Enter the desired number (up to 20 digits), press the Next soft key. or key to select the ring you like to 5.*Use associate with the number, press the Save soft key to confirm. 6.
ADVANCED FUNCTIONS Using a Pause A pause is useful when you access an interactive voice response system, such as an automated banking system. A pause provides a delay of 3 seconds. If you want to insert a pause when you dial a number in standby mode or store a number in memory, press the letter P will appear at the pause entry. key. The Viewing the Phone book Entries 1. In the standby mode, press the or 2. Press entry is displayed. key.
ADVANCED FUNCTIONS Editing the Phone book Entries 1. Press the Menu soft key. key to choose the Phonebook, press 2. Press the the Select soft key. 3. Press the Select soft key. key to choose Edit menu. Press the or key repeatedly until the entry 4. Press you want to edit displays, press the Select soft key to confirm. 5. If necessary, press the Erase soft key to clear the digit(s) then enter the desired name and number, press the Next soft key to save. or key to select the ring you like to 6.
ADVANCED FUNCTIONS Deleting the Phone book Entries 1. Press the Menu soft key. key to choose the Phonebook, press 2. Press the the Select soft key. or 3. Press Select soft key. key to choose Delete. Press the or key repeatedly until the name 4. Press you want to delete displays, then press the Select soft key. The display shows "Confirm ?". You can press the Del soft key to delete it or press the Cancel key to exit. 5.
ADVANCED FUNCTIONS One-Touch Memories You can store up to 4 numbers in direct memories. All the numbers will be stored in the phone book. Storing Memory Numbers 1. Press the memory key (M1, M2, CS & M3) in standby mode. 2. The display shows "Number ?". Enter the desired number (up to 20 digits), press the Next soft key. or key to select the ring you like to 3. Use associate with the number, press the Save soft key to confirm.
ADVANCED FUNCTIONS Dialing from One-touch Memories In the standby mode, press M1, M2, CS & M3 to dial out the corresponding number. Editing Memory Numbers Perform the steps of the “Editing the Phone book Entries” paragraph. Please refer to page 46. Note: The memory default names are M1: to M3:, you can add something following them but cannot delete the default name. e.g. you can modify M1 to M1: home. Deleting Memory Numbers Perform the steps of the “Deleting the Phone book Entries” paragraph.
ADVANCED FUNCTIONS HS Settings Setting Alarm You are able to set the alarm on the handset and adjust the alarm settings. 1. Press the Menu soft key. or key to choose HS Settings, 2. Press then press the Select soft key. 3. Press the Select soft key to choose Alarm menu. 4. The display shows the current time set. Use the key to select On/Off, press the Select soft key. or 5. If you select On, the display invites you to enter the time in HH:MM format. Use the numeric keypad to enter. 6.
ADVANCED FUNCTIONS Notes: At step 5 you need to enter the time in 24-Hour format. If you press any key when the alarm rings, the alarm will be silent. If you choose Snooze On, the alarm will ring at regular intervals of 11 minutes. If you press the key when the alarm sounds, the option will be switched to Snooze Off. Audio Setup You can also use the menu to adjust the audio volume. 1. Press the Menu soft key. or key to choose HS Settings, 2. Press then press the Select soft key.
ADVANCED FUNCTIONS Key Tone Every time you press a key, your handset acknowledges it with a key tone. You can disable the key tones for a silent use. In certain error conditions, a warning tone will sound when an incorrect key is pressed. 1. Press the Menu soft key. 2. Press or key to choose HS Settings, then press the Select soft key. or key to choose Tone Setup 3. Press menu, press the Select soft key. 4. Press the Select soft key again to choose Key Tone. or key to choose On or Off 5.
ADVANCED FUNCTIONS LCD Contrast Setting The adjustment allows you to optimize the visibility of the display by changing its contrast according to the environment conditions. 1. Press the Menu soft key. or key to choose HS Settings, 2. Press then press the Select soft key. or key repeatedly to choose LCD 3. Press Contrast, then press the Select soft key. or key repeatedly to choose among 4. Use the 17 available contrast levels, then press the Save soft key. 5. Press the key to return to standby mode.
ADVANCED FUNCTIONS 4. Use or key to choose Date Format or Time Format, press the Select soft key. or key to choose the Date 5. You can use Format (DD-MM/MM-DD) or the Time Format (12-Hour/24-Hour), press the Save soft key to save. Setting date & time 1. Press the Menu soft key. or key to choose HS Settings, 2. Press then press the Select soft key. or key to choose Date & Time 3. Press menu, press the Select soft key. or key to choose Set Date or Set 4. Press Time menu, press the Select soft key. 5.
ADVANCED FUNCTIONS Selecting a Base This function allows you to select a base from those already registered to the handset. You can access the options by scrolling the menu. 1. Press the Menu soft key. or key to choose HS Settings, 2. Press then press the Select soft key. or key to choose Select Base 3. Press menu, press the Select soft key. or key to select the base 4. You can use you want, then press the Select soft key. If you select a non-existent base, the handset will sound a warning tone. 5.
ADVANCED FUNCTIONS HS Reset If you reset the handset, all the features under HS Settings menu will be restored to the factory initial setting: Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS Name, Auto Answer and Date & Time. But LCD Contrast can not be restored. 1. Press the Menu soft key. 2. Press or key to choose HS Settings, then press the Select soft key. or key to choose the HS Reset 3. Press menu, press the Select soft key. You will be prompted to enter the PIN code. 4.
ADVANCED FUNCTIONS Amplified Your phone is equipped with a specialized amplification function designed to fit your needs. If you switch this function on, the handset receiver volume adjustment is 15-40dB. Otherwise the receiver volume adjustment is 0-15dB. 1. Press the Menu soft key. 2. Press or key to choose HS Settings, then press the Select soft key. or key to choose the Amplified 3. Press menu, press the Select soft key. or key to choose On or Off 4. You can use to enable or disable the function. 5.
ADVANCED FUNCTIONS BS Settings Terminate HS This function allows you to delete a handset registration from the base. 1. Press the Menu soft key. or key to choose BS Settings, 2. Press then press the Select soft key. 3. Press the Select soft key to choose the Terminate HS menu. The display shows "PIN?" to prompt you to enter the PIN Code (The default PIN Code is "0000"). Then press the OK soft key. or key to select a handset, press 4. Use the Select soft key to confirm.
ADVANCED FUNCTIONS Flash Time You can select to change the Flash time by the following steps: 1. Press the Menu soft key. or key to choose BS Settings, 2. Press then press the Select soft key. or key to choose Flash Time menu. 3. Use Press the Select soft key. 4. The display shows the current setting. Use the key to select Flash-1(100ms:UK and or European countries) /Flash-2(300ms:France), press the Save soft key. Modify PIN This function allows you to change the PIN number of the currently active Base.
ADVANCED FUNCTIONS 4. The display shows "PIN?". Enter the current PIN, then press the Next key. If the old PIN code is correct, you will be prompted to enter a new PIN code, otherwise a warning beep will sound and the handset will return to the Modify PIN menu. 5. Enter the new PIN, press the Next key. You will be requested to confirm the PIN code. Enter the new PIN again then press the Save soft key to confirm and exit.
ADVANCED FUNCTIONS Registration The supplied handset is already registered with the number 1. You can register up to 5 handsets to the same base in order to share the same line with other people. Before registering a handset to the base, you should key on the base for about 5 press and hold the seconds then release it when you have eared an Beep. 1. Press the Menu soft key. 2. Press or key repeatedly to choose the Registration, then press the Select soft key. 3.
ADVANCED FUNCTIONS Calling with more than one Handset If you have more than one handset registered to the same base, you can make internal calls and transfer an external call between the registered handsets. Making an internal call 1. Press the key, the LCD displays as follows, then input the number of the handset you want to call. 2. If the destination handset is not available, the handset will return to standby mode. If the handset entered is valid, the called handset will ring and display HSX Calling.
ADVANCED FUNCTIONS Call transfer between handsets You can transfer an external call between the handsets that are registered to the same base. 1. During an external call, press the key then input the number of the handset you want to transfer the call to. 2. If the called party can answer your call, he/she can key to talk with you. At this time you can press the inform him/her of the incoming call. 3. When the called party answers, press the key or replace the handset to the base to complete the transfer.
ADVANCED FUNCTIONS 4. Either of the two internal handsets can press the key to leave the conference call at any time. Note: If one of the handsets drops the conference call, the remaining handsets will continue the conference. Caller ID on call waiting When you subscribe to Call Waiting service from your local telephone company, the telephone will display the name and number of the second caller while you are having a conversation. 1.
FEATURE LIST y y y y y y y y y y y y y y y y y y y y y y y y y y DECT 6.0 technology 2.
FEATURE LIST y y y y y Auto answer ON/OFF selectable Alarm clocks include snooze option Handset Name setting Backlit LCD screen and keypad Low radiation (optional) Caller ID y FSK and DTMF dual system Caller ID y Caller ID / Call Waiting y Caller ID list with up to 40 entries y Incoming calls can be called back/added to phonebook/deleted y New call indicator y Message waiting 67
TROUBLESHOOTING Symptom Check & Remedy No operation y y y y No dial tone y y Nothing appears on the display Handset seems to have very short battery life Caller’s number is not displayed y y y y y y y y y Check that the power adapter is properly connected. Check that the telephone line cord is properly connected. Check that the handset batteries have full power. Check that the handset batteries are installed properly. Check that the telephone line cord is properly connected.
TECHNICAL SPECIFICATIONS Frequency Range Channels Modulation Charging time Ambient temperature Humidity Dimensions (mm) Power Supply 1.92~1.93GHz 5 frequency channels GFSK 15 hours Normal: 15℃ ~ 35℃, Extreme: 0℃ ~ 40℃ 0%~90% Base: 136 x 100 x 59; Handset: 160 x 58 x 38 Base input: 7.5V, 500mA; Handset input: Ni-MH: 1.2V x 3, 600mAh Design and specifications are subject to change without notice.
TECHNICAL SPECIFICATIONS If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: - Noise is heard during conversations. - Caller ID features do not function properly.
SAFETY INFORMATION General Only use the power supply included with the product. Only use the approved rechargeable batteries supplied. Do not open the handset (except to replace the handset batteries) or base. Contact the helpline for all repairs. Never dispose of batteries in a fire. There is a serious risk of explosion and/ or the release of toxic chemicals. Do not place objects on the line cord or power cable that may cause damage.
SAFETY INFORMATION Environmental Do not expose to direct sunlight. Always ensure there is a free flow of air over the surfaces of the telephone. Do not place any part of your product in water and do not use it in damp or humid conditions e.g. bathrooms. Do not expose your product to fire or other hazardous conditions. Unplug your phone from the telephone socket during thunderstorms because it could damage your telephone. Your guarantee does not cover thunderstorm damage.
REGULATORY COMPLIANCE Part 68 of FCC rules information This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
REGULATORY COMPLIANCE - The REN is used to determine the number of devices that may be connected to the telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.00). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
REGULATORY COMPLIANCE uninterrupted service. - If trouble is experienced with this equipment, for repair or warranty information, please contact our customer service staff at: 1-888-864-2446 or press the green CS quick dial memory key. Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
REGULATORY COMPLIANCE qualified installer. - This equipment is hearing aid compatible. - Privacy of communications may not be ensured when using this telephone. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
REGULATORY COMPLIANCE Caution: To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons. For body worn operation, this handset has been tested and meets the FCC RF exposure guidelines when used with the (Geemarc) accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
GUARANTEE Sonic Alert warrants the phone against any defect in materials or workmanship for the period of one year from the date of purchase. Should you experience a problem, contact our customer service department. Be sure to save your sales receipt as proof of purchase date should you need warranty service. Within a period of one year from purchase date, Sonic Alert will repair or replace (our discretion) your phone at no cost, if a defect in materials or workmanship is found.
GUARANTEE Warranty service is available only with proof of purchase. Simply send the Amplidect350 (postpaid) and a copy of your sales slip as proof of purchase to: Sonic Alert Warranty Center 1081 West Innovation Dr. Kearney, MO 64060 CS Green Customer Service key at top has been pre-programmed with our USA customer service number. Press the CS key to direct dial for any Customer Service or technical related help or questions.
