TT ans rv men AY Thank you for purchasing this cordless telephone, A ane of the high-quality produces of our company. To obtain optimum performance, be sure to read i..this. manual carefully. before. starting. operation and keep it for future reference. Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on pages 21722 before use. Read to understand all instructions. Accessories First carefully remove your phone from the gift box.
When. using your telephone. equipment, basic safety. precautions should always be followed to reduce the risk of fire, electric shack and injury 10° persons; including the following: 1. Read to understand all instructions in the operation manual 2. Follow all warnings and instructions marked on this unit 3. Unplug this unit from wall outlets and telephone jacks before “leaning. Do not use liquid or aerosol cleaners. Use a damp cloth for he job.
Features... oo. Ce 4 Location of Controls. 8. Handset Installation A. Base Unit 8. Handset LCD In formations. A. LCD Display... B. Descriptions... .. Handset Settings... n A. Connection Code Set 1 B.Ringer volume adjust SH C. TALK volume adjust 18 D. keypad lock It BASIC CHURCHWOMAN oo ia A. Phone book function .. S14 B.Pause function make/receive/end a call DCH BUN. vv E. Last number redial... F.language select Caller Operation. . 16 A. Making/ Clearing /Call back the calling numb 3. Areacodefilter C.
If you experience trouble with your unit, please check the following before calling for help. Problem The unit does not work if you hear two beeps when trying to use the phone If the phone does not ring when. you receive a call Cause & Remedy AC adapter unplugged or mains power failure. The handset is located beyond the range of the base Unit. Or the handset is out of registration. Place the handset On the base cradle: Move close 10 the base unit or place the handset on the base cradle.
A. Base Unit CHARGING PINS 5. CHARGE LED 2. PAGE BUTTON 6. POWER SOCKET 3. POWER LED 7. TELEPHONE LINE SOCKET 4.IN USE LED 8. TONE / PULSE SWITCH Before Using Out-of range warning In talking mode. if the handset is too far away from base unit, a orange-warning tone wil give alarm signal the semiarid, Th should move back nearer to the base unit. If not, the base u automatically rectum to standby mode after make beep sounds 45 seconds.
rh EG 1. In the standby mode, press EDIT button once. 2. Then press CID button, the LCD shows AREA CODE, then input the 174 digits area code number. 3. Press EDIT button again to save and exit. C. Paging button 1. Press the PAGE button to page the handset, 2. Press PAGE button a second time 10 cancel a page operation. D.
Base unit Connecting the telephone line and connecting the power. Ey Single-one AC Adapter ‘ Telephone Jack Telephone Line Cord P CUTOUT: 9V 200mA X 2 NOTE: The adapter must pass the authorized approval, Handset install the battery {1} push the battery (2) Plug the battery (3) Close the battery cover downward. connector into the Jack cover til it locks into place. 3 Romano 4 § NOTE: 1. The rechargeable battery type is: Ni-MG 450mAh 3,6V 2. Do not throw the battery into the fire. 3.
E. Last number redial When the handset is in talking mode; pressing the RDP BUSH Will open the line and dial out the fast call numbers. PULSE/TONE select: The Pulse/Tone switch is located on the backside of the base. For PULSE dialing, move the switch to P position. For TONE dialing, move the switch to T position. If you don t know, please ask the support for details. Basic Function Ear-Microphone connect (Optional) The unit have a Ear-Microphone for vou to use. When yo! to.
LCD display: Description: in standby mode: In this mode, the LCD will show the handset number and mealtime. rss ie IN USE indicator: After pressing button; the TALK will show on the LCD, indicating that the units in use mode. REPEAT marking: If the call comes repeatedly, when reviewing the call, the RPT will turn on the right upper of the LCD. Battery low indicator: If the battery is low, the BAT LOW will show on the LCD.
3. Review the memory 1. Press the MEMO button 2. Press the * and # button to select you want. PS: if the name is more than 12 characters (there are up to 16 characters), press FLASH button to look the leaving characters 4. Speed review the memory 1. Press the MEMO button 2. Enter the location number(01720) of the record, the screen will display the record you want. 3. If you press button wil dial out the number. 5. Deleting the single or all records in the memory Delete all record 1.
A. CONNECTION CODE SET 1. Make sure the base unit Is connected into the AC sutler and fine jack. 2. Press and hold the PAGE bunion on the base unit. After 2 seconds, put the handset on the base unit, the unit will give you a confirmation beep, it means that the code has been set and the handset will show HS-1 on the LCD. 3. If you have more than one handset, put the second handset on the base unit until you get a beep and display HS-2, continue the same procedure, if you have third and fourth handset.