Installation Instructions

Wireless charging with clock
FCC ID: 2ADK3-XO-9757
Using the Clock
- Connect the provided charging cable to a power source and to the micro USB port on
the clock. (The clock display will show time and the backlight will light up.)
- Tap the top of clock to temporarily turn on the backlight.
- Press the [ ] button to toggle between the clock time and the alarm time. The clock
display will show the [ ] icon when in time mode, and the [ ] icon when in
alarm mode.
- When in time mode, press the [ button to toggle between the 12-hour and the 24-
hour clock.
Setting the Time and Date
To set the clock time, first make sure you are in time mode.
1. Press the [ ] button, the hour digit will flash. Adjust the hour using the [ ] button
and [ ] buttons. The clock will show [ ] when in PM time.
2. Press the [ ] button to confirm the hour and set the minute.
3. Continue the above steps to set the year, month and day.
Setting the Alarm Time
To set the clock time, first make sure you are in alarm mode.
1. Press the [ ] button, the hour digit will flash. Adjust the hour using the [ ] button
and [ ] buttons. The clock will show [ ] when in PM time.
2. Press the [ ] button to confirm the hour and set the minute.
3. Continue the above steps to set the snooze interval and alarm tone choice.
Turning the Alarm ON/OFF
When in alarm mode, press either the [ ] button or the [ ] button to enable the alarm.
The [ ] icon will appear in the lower right corner of the display, indicating that the alarm
is enabled.
Press again to enable the alarm and custom snooze function. The [ ] icon and the [ ]
icon will both appear in the lower right corner of the display, indicating that the alarm and
custom snooze are both enabled.
Press a third time to disable these functions. Neither the The [ ] icon and the [ ] icon
will appear in the lower right corner of display.