User's Manual

JD-9188 OFFICE RF Wireless Optical Mouse

User Manual

Thank you for

selecting our JD-9188. This is one of our latest wireless mice, which the working

frequency is 27MHz. It has exquisite appearance and comfortable sense of touch. You can free

from restraint and enjoy your internet freedom. It facilitates to enhance your working efficiency

and enjoy your wonderful life.

Feature description

1.Radio frequency 27MHz, enjoy your freely wireless space

2.256 sets of ID code, so the mice will not influence on each other while using at the same time in

the same office

3.Use the most advanced IC,800DPI, accurate position, free yourself on internet.

4.Auto-sleeping function,

save power, batteries life prlonged。

System Compatibility

1．Computer model : IBM PC/AT Compatible, Power Macintosh

2．Operation system : Windows 98se/ME/ 2000/XP

3．Interface : USB

The Steps of Install battery

1.Two PCS rechargeable AAA Ni-MH batteries:

2 Press the button of mouse bottom, and pull the mouse upper cover rearward (Please

see the reference picture); Insert the two rechargeable AAA Ni-MH batteries correctly

according to the polarity marks of the battery grooves, otherwise will hurt the mouse.

3.Pull the mouse upper cover forward, when you hear “rack” sound which shows the battery cover

is locked successfully.

ID Setup

1.Put the mouse near the receiver。

2.Press the ID button on the surface of receiver, the "RCV" LED indicator begins to

PAGE 1
JD-9188 OFFICE RF Wireless Optical Mouse User Manual Thank you for selecting our JD-9188. This is one of our latest wireless mice, which the working frequency is 27MHz. It has exquisite appearance and comfortable sense of touch. You can free from restraint and enjoy your internet freedom. It facilitates to enhance your working efficiency and enjoy your wonderful life. Feature description 1.Radio frequency 27MHz, enjoy your freely wireless space 2.
PAGE 2
flash continuously. 3.Press the ID button on the buttom of mouse within 5 seconds, a few seconds later it will be on which shows it is successfully to finish the digital transmission between the mouse and the receiver. You may start to use it. 4.Keep1 to 2 seconds for the interval when you have several ID setup of the mouse. 5.Working distance: within 1.
PAGE 3
Attention Please 1.Try not to keep the mouse too far from receiver 2.Don’t insert alkaline batteries and no-rechargeable batteries(batteries are can’t be recharged) in the grooves on the receiver. Otherwise will be a hazard of battery explosion. 3.It can prolong the batteries life if you use the mouse on the white surface 4.Auto-sleeping,and save energy function, it will be auto-sleeping without operation within a long time, press any key if you need to operate. 5.