User's Manual

ManualsBrandsXinbond Technology ManualsComputers & Accessories2.4G wireless mouse receiver

Xinbond Industrial Co.,Ltd

Model： BD-9502GL

Specifications ： USB 800-1600DPI

Describe ： 2.4G Wireless Laser Mouse

product features

1. The 2.4G frequency two-way hopping wireless technology, 16 channels, 65536

Unit ID , super anti-interference capability.

2. 800-1600 DPI high-resolution precise positioning

3. Four power-saving mode, the depth of sleep mode current is less than 100uA, 8 minutes without

moving , mouse will automatically turn into the deep sleep mode (almost no electricity wasted

at this time, press any key can wake up)

4. The use of 360-degree direction, no angle restrictions

5. No need intelligent connection technology to the Code .

6. Micro-receiver , can be put in the internal mouse and easy to carry

7. Special DPI key switch cycles between 800-1600DPI.

8. Low-voltage alarm function monitors the battery capacity (LED lamp flashes when the battery

capacity not enough)

9. Power switch design will shut down the power anytime when no use, this extend battery’s life

10. Main dimensions: 81 *48*29mm

system requirements

1. Applicable model IBM PC / AT Compatible, Power Macintosh

2. Operating system Windows 98/ME / 2000/XP/Vista

3. Interface USB

Technical parameters

Mouse:

1. Rated operating voltage 1.5V

2. Rated operating current 15mA

3 Maximum Acceleration 8G

4. Resolution 800-1600DPI

5. The work of 16 radio channels, automatic frequency-hopping

6. Wireless operating frequency 2.402-2.480GHz

7. Maximum effective distance of 8-10 m

Receiver:

1. Rated operating voltage 5V

2. Rated operating current 20mA

Summary of content (4 pages)

PAGE 1
Xinbond Industrial Co.,Ltd Model： BD-9502GL Specifications ： USB 800-1600DPI Describe ： 2.4G Wireless Laser Mouse product features 1. The 2.4G frequency two-way hopping wireless technology, 16 channels, 65536 Unit ID , super anti-interference capability. 2. 800-1600 DPI high-resolution precise positioning 3.
PAGE 2
Steps of Removing the receiver and installing the batteries 1. Remove the receiver at the bottom of the mouse 2. Ready for a new AAA alkaline batteries. 3. Switch the button at the bottom of the mouse ,as shown, and then remove the cover. 4. Please identify the right side of the battery’s polarity . (anti-loaded battery may damage the mouse). 5.
PAGE 3
DPI Switch button s 6. DPI default value is 1600 DPI . Press the DPI can switch the button between 800-1600DPI Ability to go through interface Except the transparent glass it can go through any other interface in normal use Features of low-voltage directive At the top of the mouse there is low-voltage lights in less than 1.0 ~ 1.1V voltage, the Red low voltage warning light when you move the mouse and start flashing, Reminding you to replace battery you need.
PAGE 4
the mouse will enter the dormant state, in order to wake-up move the mouse to wake up 3. If you do not have time when travelling or do not use please remove the battery in order to avoid battery power, or leakage 4. If the mouse on the desktop of metal materials, the best is to put the mouse pad at the bottom of the mouse or the receiver placed at other locations in order to get the best reception efficiency 5.