Quick Start Guide

Prodcut Parameters
光敏
Please red this guide carefully before using the
product, and please keep it properly.
Product Description
Antenna
Speaker
About works with Mijia
The product works with Mijia, and can be controlled through Mijia app.
Scan the QR code to download and install the Mijia APP. Users who have installed the Mijia
APP will directly enter the device connection page. You can also search for "Mijia" in the
app store, and download from there. Open the homepage on Mijia, click "+" in the upper right
corner of the page, and add devices according to the app prompt.
Power On
Plug the power cable into the power jack of the camera and the
camera will automatically turn on.
Battery Status LED
Adding Devices（Android）
Open the homepage of Mijia app and click “+”in the upper right corner of the page to add a device;
select “Outdoor 360 Webcam.”
Reset Button Power Access
Outdoor 360 Webcam Quick
Start Guide
Microphone
Infrared Light
Lens
Light Sensor
SD Slot
Note: Due to the upgrade and update of the Mijia app, the actual operation may be slightly different from the above description; please
follow the instructions in the app.
Please note that “works with Mijia” is only for software
verification, and Xiaomi and Mijia are not responsible for the
production, standard implementation, quality supervision and other
aspects of the product and enterprise.
*When the battery status LED is
on, and the device prompts
“Access-Point ready” the device
is powered on successfully. If
the device prompt is not "wifi
connected" please long press the
reset button to restart.
2
Adding Devices（iOS）
1.Open the homepage of Mijia app and click “+”in the upper right corner of the page to add
a device; select “Outdoor 360 Webcam.”
2. Select the WiFi router you need to connect to and
fill in the WiFi password; place the phone as close
as possible to the device and wait for the software
to be automatically configured.