Quick Start Guide

Please read this guide carefully before using the product,
and please keep it properly.
Product Description
Antenna
Microphone
Product Parameters
SD Card
Slot
Power Access Reset Button
About works with Mijia
The product works with Mijia, and can be controlled through Mijia app.
Scan the QR code to download and install the Mijia APP. Users who have installed the
Mijia APP will directly enter the device connection page. You can also search for
"Mijia" in the app store, and download from there. Open the homepage on Mijia, click "+"
in the upper right corner of the page, and add devices according to the app prompt.
Power On
Plug the power cable into the power jack of the camera and the camera will
automatically turn on.
Battery Status LED
Adding Devices (Android)
1. Open the homepage of Mijia app and click "+" in the upper
right corner of the page to add a device; select "Flood light camera."
Include: Flood light camera×1, Power Adaptor×1, Quick Start Guide×1, Screw Bag×1
Flood light camera Quick Start Guide
Lens
LED Infrared Light
+ White Light
Speaker
Product Type: XVV-6120S-D7
Resolution: 1080P
Image Enhancement: 3D digital
noise reduction
Field Angle: 150°
Audio System: Two-way audio
Storage: Micro SD Card/Cloud Storage
Working Temperature: -
10°C~50°C
Power Input: DC -12V /1 A (Main Device)
100-240 V~ 50-60Hz 0.4 A (Adaptor)
Lens: F2.0 aperture, 2.8mm focal length
Night Vision Lights: 32 White Lights, 16
Infrared Lights
Connection Method: Wi-Fi 802.11 b/g/n 2.4GHz
Supported Platforms：Android 4.4/ios 9.0 and above
Working Humidity: ≦75%（ 40°C Room
Temperature Environment）
Note: Due to the upgrade and update of the Mijia app, the actual operation may be slightly
different from the above description; please follow the instructions in the app.
Please note that “works with Mijia” is only for software verification, and Xiaomi and
Mijia are not responsible for the production, standard implementation, quality supervision
and other aspects of the product and enterprise.
*When the battery status LED is on,
and the device prompts “Waiting for
connection,” the device is powered
on successfully. If the device prompt
is not "Waiting for connection,"
please long press the reset button to
restart.
2
Adding Devices（iOS）
1.Open the homepage of Mijia app and click “+”in the upper right corner of the page to add a device; select
“Flood light camera.”
2. Select the WiFi router you need to connect to and
fill in the WiFi password; place the phone as close
as possible to the device and wait for the software
to be automatically configured.