Quick Start Guide

Model No.: XVV-6120S-B1
xiaovv outdoor camera Quick Start
Guide
Please read this guide carefully before
using the product, and please keep it
properly.
Product Description
Light sensor
Lens
Microph
one
Antenna
Power
Access
Reset Button
Speaker
SD Card slot
About works with Mijia
The product works with Mijia, and can be controlled through Mijia app.
Scan the QR code to download and install the Mijia APP. Users who have installed the Mijia APP will
directly enter the device connection page. You can also search for "Mijia" in the app store, and download
from there. Open the homepage on Mijia, click "+" in the upper right corner of the page, and add devices
according to the app prompt.
N ote: Due to the upgrade and update of the Mijia app, the actual operation may be slightly different from the above description; please follow the instructions in the app.
Please note that “works with Mijia” is only for software verification, and
Xiaomi and Mijia are not responsible for the production, standard
implementation, quality supervision and other aspects of the product and
enterprise.
Power On
Plug the power cable into the power jack of the camera and the camera will
automatically turn on.
Indicator Light
* The power indicator light is on, and the device prompts "Access-Point ready" to
indicate successful booting; if the device prompt is not "Access-Point ready" long
press the reset button to restart.
Adding Devices (Android)
1. Open the homepage of Mijia app and click "+" in the upper right
corner of the page to add a device; select "xiaovv outdoor
camera."
2
待
.
Adding Devices (iOS)
1. Open the homepage of Mijia app and click "+" in the upper right corner of the page to add a device; select
"xiaovv outdoor camera."
Select the router WiFi you need and fill in the WiFi
password; place the phone as close as possible to
the device and wait for the software to be
automatically configured.