User's Manual

Mi A1
Saturday, August 16
Volume
Buttons
Power
Button
Menu
Button
Back
Button
USB Type-C Port
Home Button
When 2 SIM cards are in use, one SIM will offer 4G/3G/2G
while the other will offer only 3G/2G.
About Dual SIM:
SIM Card Tray：
Important Safety Information
Temperature: 0℃—40℃
Install the adapter near the device in an easily
accessible position.
Android One
With software designed by Google, Android One phones have
access to Google’s premiere security features, applications and
innovations on your phone, such as free unlimited
high quality storage with Google Photos.
Thank you for choosing Mi A1
Long press the power button to turn on the device.
Follow the on-screen instructions to configure the device.
Visit our official website: www.mi.com
For more information
Tray 1 supports Nano-SIM card;
Tray 2 supports Nano-SIM card/Micro SD card.
Obop.TJN
Obop.TJN
Obop.TJN
Njdsp!T E
Xiaomi Communications Co., Ltd.
Model: MDG2
All rights reserved by Xiaomi Inc.
000000000000-A
Correctly dispose of this product. This marking indicates that
this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle responsibly to promote
the sustainable reuse of material resources.
To safely recycle your device, please use return and collection systems
or contact the retailer where the device was originally purchased.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
CAUTION
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
RED Declaration of Conformity
EU regulations
We, Xiaomi Communications Co., Ltd.
Body-worn SAR testing has been carried out at a separation
distance of 5 mm ( MDG2 ). To meet RF exposure guidelines during
body-worn operation, the device should be positioned at least
this distance away from the body.
If you are not using an approved accessory ensure that whatever
products used is free of any metal and that it positions the phone
with the indicated distance away from the body.
Receiver Category 2
Hereby, Xiaomi Communications Co., Ltd. declares that this
GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth
and WiFi MDG2 is in compliance with the essential requirements
and other relevant provisions of the RE Directive 2014/53/EU.
The declaration of conformity could be consulted at
www.mi.com/en/certification
210x150mm
单页 70x150mm
填写料号，并生成条码，条码为料号加版本，扫描后为数字后紧跟版本，不需要分割线
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy. The
exposure standard for wireless device employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this
device has been tested and meets the FCC RF exposure guidelines for
use with an accessory that contains no metal and be positioned a
minimum of 1.5 cm from the body. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines. If you do not use
a body-worn accessory and are not holding the device at the ear,
position the handset a minimum of 1.5 cm from your body when the
device is switched on.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
RF Exposure Information (SAR)
FCC Note:
This device has an electronic label for certification information,
to access it , please select Settings>My device>Verification
E-label：
This mobile phone offers the following frequency bands and
maximum radio-frequency power：
Frequency Bands and Power
This mobile phone complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including anterference that may cause undesired operation.
This mobile phone has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
FCC Regulations
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
GSM900：35dBm
GSM1800：32dBm
UMTS band 1/8：25 dBm
LTE band 1/3/5/7/8/20/38/40：25.7 dBm
Bluetooth：<20 dBm
802.11 b/g/n: Wi-Fi 2.4GHz band <20 dBm; Wi-Fi 5GHz band<23 dBm
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.
Ensure the power adapter used meets the requirements of Clause 2.5
in IEC60950-1/EN60950-1 and has been tested and approved
according to national or local standards.
Manufacturer :
The Rainbow City of China Resources, NO.68, Qinghe Middle
Street, Haidian District, Beijing, China 100085
Legal Information
Pantone Cool 1505C
Model: MDG2
SAR 10g limit：2.0 W/Kg, SAR Value：Head:1.75 W/Kg,
Body: 0.76 W/Kg (MAX, 5mm distance).
SAR 1g limit：1.6 W/Kg, SAR Value：Head: 1.00 W/Kg,
Body-worn: 0.29 W/Kg (MAX, 10 mm distance).
Hotspot: 0.29 W/Kg (MAX, 10 mm distance).