Product Specification Product name：Bluetooth Module Product model：F-9398 DATE：2019-01-03
Catalogue 1.Product Overview： ..................................................................................................................................... 3 2.Module specification features： .................................................................................................................. 3 3.Performance parameter： ........................................................................................................................... 3 4.Block diagram of module：..................
1.Product Overview： BK3431Q highly integrated bluetooth 5.
.Block diagram of module： 5.Module size and module pin bitmap： 6.
2 3 4 5 6 7 8 GND VCC P31 P32 P10 P11 NC I/O I/O I/O - ADC1 ADC2 PWM0 PWM1 - 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 NC GND NC P12 P13 P33 P16 P17 NC P07 P06 P05 P04 P01 P00 P02 P03 RST I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O PWM2 PWM3 ADC3 - Reset pin (low level reset) - Burning mouth Burning mouth Burning mouth Burning mouth UART_RX UART_TX Burning mouth Burning mouth 7.Functional Specification： 7.1 serial port TX is P00, RX is P01 and baud rate is 9600 7.
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.
SHENZHENSHI XINZHONGXIN TECHNOLOGY CO., LTD. F-9398 Module statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 1) The radio elements have the radio frequency circuitry shielded.
