ZAIoT-VTC01 ZETA Edge-AI Vibration Sensor 1 ZAIoT-VTC01
ZAIoT-VTC01 Content 1. Product Description ............................................................................................................ 3 2. Appearance and size ........................................................................................................... 4 3. Product Specification ..........................................................................................................5 4. Installation guide .....................................................................
ZAIoT-VTC01 1. Product Description ZAIoT-VTC01 is a low-power design, plug-and-play wireless vibration and temperature integrated collection terminal product, with high-precision vibration acceleration and temperature collection functions. The product has built-in 10kHz (Z-axis) and 6kHz (XY-axis) high-frequency response acceleration and temperature sensors.
ZAIoT-VTC01 2.
ZAIoT-VTC01 3.
ZAIoT-VTC01 4. Installation guide Step1 - Measurement point selection Sensors are generally deployed on flat surfaces with high stiffness on the equipment, as close as possible to the rotating bearings, such as the drive end bearings of motors. Please refer to national and industry standards for the number and location of measurement points for each equipment model.
ZAIoT-VTC01 when shipped). Check the status of the terminal on the platform to see if it is online.
ZAIoT-VTC01 5. Operating Instructions 5.1. Platform login Log in to ZETA network management platform, platform address https://platforms.zifisense.com/network/#/login 5.2. Device configuration After logging in, go to the Network Device - ZETA MS page and click the Add button to add a new device. And add the Sensor information in the pop-up window (see the actual device nameplate information for details).
ZAIoT-VTC01 Select from the left menu: Network Device → ZETA MS → Add The red asterisk is a required item, after filling in, press OK to add the device Check the device, apply Device Control → Settings, as shown below: 9
ZAIoT-VTC01 Among them, the following parameters need to be set according to the function of different rotating machinery: Acquisition of raw vibration data according to the configuration period and wirelessly backhauled through ZETA-H protocol The sampling frequency and the number of spectral lines can be configured The acquisition cycle can be configured Support different terminals to send and set synchronous acquisition time 10
ZAIoT-VTC01 5.3. Check Status After the device is added, you can view the data of the added device in the list. When the device is powered on, the online status will change from "offline" to "online", and the startup time, registration time and heartbeat time are updated.
ZAIoT-VTC01 Through the platform command, you can actively query the device status and parameter setting information as follows: Device status query Detection parameter query Version number query 6. Sensor functions 6.1.
ZAIoT-VTC01 6.2. Vibration index report Velocity rms (10Hz to 1kHz) in mm/s Acceleration rms (10Hz~10kHz) in m/s2 Surface temperature of the measurement point in ℃ 6.3.
ZAIoT-VTC01 terminal is successfully connected. If unsuccessful, operate the button to restart once.
ZAIoT-VTC01 7.
ZAIoT-VTC01 8. Safety instructions 1. Potential electrostatic charging hazard: clean only with a damp cloth. 2. Only ER26500 lithium thionyl chloride battery produced by EVE Energy Co., Ltd. is allowed to be used as the power supply. Do not charge the battery. Do not replace battery when an explosive atmosphere is present.
ZAIoT-VTC01 9. Revision Version File name Revised by Date Description OUYI 2021.12.6 First edition ZETA Edge-AI V1.0.0 Vibration Sensor User Manual Add ZETA Edge-AI V1.0.1 Vibration Sensor OUYI User Manual 2022.6.1 Operating Instruction part FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
ZAIoT-VTC01 18
