MTZT-IN01 ZETA Mote 1
MTZT-IN01 Copyright Statement ZiFiSense owns the copyright on this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of ZiFiSense. Disclaimer This specification is preliminary and is subject to change at any time without prior notice. ZiFiSense assumes no responsibility for any errors contained herein. ZiFiSense is not responsible for any patent infringement of third party on its use or as a result of its uses.
MTZT-IN01 Table of Contents 1. Product Description ............................................................................................................ 4 2. Applications ............................................................................................................................ 4 3. Features.................................................................................................................................... 4 4. Appearance and size ......................................
MTZT-IN01 1. Product Description ZETA Mote is a low power mesh layer relay which can build up to four layers of tree type networking, effectively increasing single-station coverage, with signal blind area coverage, preventing data congestion, etc. Two-way communication, ultra-wide coverage, multiple security, ultra-low power consumption, battery-powered, easy installation and support for null port upgrade.
MTZT-IN01 4. Appearance and size L148.5mm * W113.5mm * Th43.
MTZT-IN01 6
MTZT-IN01 5. Product parameters Product No. Electrical Features Physical Features Environment Specification MTZT-IN01 Power supply Battery capacity Stand-by current Working current Weight Size Enclosure material Antenna Operating temperature Storage temperature Ingress protection Hazardous environment 6. Packing List ZETA Mote 0.4m FRP Antenna 1 1 7 DC 5V / Battery:2*ER34615 2*19000 mAh ≤ 10 μA ≤ 70 mA 0.6kg 148.5*113.5*43.
MTZT-IN01 7. Installation 7.1.
MTZT-IN01 7.2.
MTZT-IN01 8. Battery replacement Loosen the 4 M6 socket head cap screws (Lanyard) and open the top cover.
MTZT-IN01 9. Operating Instructions 9.1. Platform login Log in to ZETA network management platform, platform address https://platforms.zifisense.com/network/#/login Figure: Platform login 9.2. Device configuration After logging in, go to the Network Device - ZETA Mote page and click the Add button to add a new device. And add the Mote information in the pop-up window (see the actual device nameplate information for details).
MTZT-IN01 9.3. Check Status After the device is added, you can view the data of the added device in the list. When the device is powered on, the online status will change from "offline" to "online", and the startup time, registration time and heartbeat time are updated.
MTZT-IN01 10. Common faults and handling Ensure ZETA signal coverage Check the power supply to ensure that the power supply is normal Check the antenna to see if the antenna is connected and the antenna interface is properly tightened. Check the device power, check whether the device is in low power state in the platform list data, or use the tool to measure whether the voltage is low or low. Please contact ZiFiSense for additional help. 11. Safety instructions 1.
MTZT-IN01 12. Revision Version V1.0.0 V1.0.1 File name ZETA Mote User Manual ZETA Mote User Manual Revised by Date OUYI 2021.12.20 OUYI 2022.6.1 Description First edition Add Operation instruction part FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
MTZT-IN01 15