IRZ1ZT92 ZETA Motion Sensor 1
IRZ1ZT92 Copyright Statement ZiFiSense owns the copyright on this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of ZiFiSense. Disclaimer This specification is preliminary and is subject to change at any time without prior notice. ZiFiSense assumes no responsibility for any errors contained herein. ZiFiSense is not responsible for any patent infringement of third party on its use or as a result of its uses.
IRZ1ZT92 Table of Contents 1. Product Description.........................................................................................................................4 2. Applications....................................................................................................................................... 4 3. Appearance........................................................................................................................................ 4 4. Features.......................
IRZ1ZT92 1. Product Description ZETA Motion Sensor is a low power infrared sensor which can sense human movements with its high-sensitivity amplifiers, anti-jamming devices, and differential inputs, so that the false detection is avoided. 2. Applications Rooftops, computer rooms, important equipment rooms, illegal entry detection, operating position detection. 3.
IRZ1ZT92 4. Product parameters Product No. Wireless Features Electrical Features Physical Features Sensor Characteristics Working Environment IRZ1ZT92 Transmission protocol Frequency band Output power Power supply Battery capacity Stand-by current Working current Size Enclosure material Waterproof level Antenna Sensing distance Sensing angle Operating temperature Storage temperature 5.
IRZ1ZT92 6. Installation There are three installation methods: Screw, 3M Adhesive and cable ties. 6.1. Screw 6.1.1.Auxiliary material No. 1 2 3 4 Materials self tapping screw (M3*20) #4 expanded plastic pipe Percussion drill，#4 drill bit，hammer slotted screwdriver, cross screwdriver 6.1.2.Installation instructions Quantity 2/device 2 1 1 Open the device case Use a slotted screwdriver to open the top cover from the bottom edge.
IRZ1ZT92 Use the self-tapping screws to secure the device in the mounting position. mounting hole mounting hole Power on Insert the power plug into the upper power socket, install two 14505 batteries (remove the insulation sheet for the existing battery), and close the upper cover.
IRZ1ZT92 6.2. Adhesive 3M 6.2.1.Auxiliary material No. 1 2 Materials 3M seamless thickened double-sided adhesive Slotted screwdriver, utility knife Quantity 5CM 2 6.2.2.Installation instructions Installation position Select a flat mounting position, and clean it up. Open the device case Use a slotted screwdriver to open the top cover from the bottom edge.
IRZ1ZT92 power socket Adhesive device Take the appropriate amount of 3M adhesive, attach it to the back of the sensor, remove the protective film of the 3M adhesive, and install the device to the specified position. 6.3. Cable Ties 6.3.1.Auxiliary material No. 1 2 Materials Metal cable ties（5*300mm) Slotted screwdriver, utility knife Quantity 2 6.3.2.Installation instructions Open the device case Use a slotted screwdriver to open the top cover from the bottom edge.
IRZ1ZT92 opening Fixation Pass the 2 cable ties through the device and secure to the installation rod Installation position 10
IRZ1ZT92 Power on Insert the power plug into the upper power socket, install two 14505 batteries (remove the insulation sheet for the existing battery), and close the upper cover.
IRZ1ZT92 7. Use of Device The sensor detection distance is about about 3 meters without occlusion. The detection is based on the amount of change in infrared detection to determine whether there is the motion, so it is unable to detect a stationary person. 7.1. Power on Place the device within the coverage of the ZETA network, install the battery, and wait for the device to go online. After the device is online, the current device status is reported.
FCC WARNING Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IRZ1ZT92 13
