ZETA AP Micro ZETA AP Micro 1
ZETA AP Micro Copyright Statement ZiFiSense owns the copyright on this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of ZiFiSense. Disclaimer This specification is preliminary and is subject to change at any time without prior notice. ZiFiSense assumes no responsibility for any errors contained herein. ZiFiSense is not responsible for any patent infringement of third party on its use or as a result of its uses.
ZETA AP Micro Table of Contents Table of Contents.................................................................................................3 1. Product Description........................................................................................ 4 2. Applications.....................................................................................................4 3. Appearance & Interface................................................................................5 5. Installation..........
ZETA AP Micro 1. Product Description AP Micro is a new generation of ZETA gateway for logistics, asset management and other fields. Support ZETA-G protocol of ZETag access, can effectively supplement mobile scene coverage. Support periodic GPS pointing, track upload, remote upgrade and other functions. Combined with a cloud-based management platform, it provides a everywhere network and uninterrupted operation supervision for logistics management and asset tracking. 2.
ZETA AP Micro 4.
ZETA AP Micro 5. Installation 5.1. Installation safety notice It is forbidden to operate with electricity when installing, wiring and dismantling the equipment. Place the equipment in a ventilated place to ensure that the equipment is installed in a dry environment. Avoid placing the equipment in a high temperature or low temperature environment. The installation location of the equipment should be far away from high-voltage cables to avoid electromagnetic interference during operation.
ZETA AP Micro 5.4. Installation steps 1) Confirm the installation hole spacing: the four-corner hole can be used for fixed installation. 2) Use the supporting expansion screws to fix the equipment on the wall of the building. Figure 2: Installation diagram 3) Connect the RF antenna and the 4G antenna. The GPS antenna may not be connected when it is installed in a fixed place in the indoor environment.
ZETA AP Micro 6. System Testing Three minutes after the gateway is powered on, the online information of the gateway can be seen on the IoT platform; After the gateway is online, it can be connected to the lower-level network element equipment, and the data of the lower-level network element equipment is uploaded to the platform for display through the gateway route; 7. Common faults and handling Check the power supply to ensure that the gateway is powered normally.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ZETA AP Micro 9