CS61 User manual
Designed and engineered in China Made in China MODEL: CS61
1. Welcome......................................... 5 2. Overview......................................... 6 3. Where To Position......................... 7 3.1 Small Meeting Room 3.2 Desk 4. How To Charge........................... 9 4.1 USB Charging 4.2 Automatic Power Off 4.3 Battery Status 5. How To Connect ............................... 11 5.1 Connect To PC (Bluetooth) 5.2 Connect To PC (USB Cable) 5.3 Connect To Smartphone 6. How To Use ....................................... 13 6.
7. Software .............................................. 17 7.1 UC Manager 7.2 Update Firmware 8. Support ................................................ 19 8.1 Faq And Technical Specifications 8.
1. Welcome Thank you for using the CS61.
2.
3. Where to position 3.1 Small meeting room Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single CS61 is ideal for up to 6 people.
3.2 Desk When using the CS61 at your desk it is recommended to put the speakerphone into an upright position using the table stand. This will better direct the audio towards you.
4. How to charge 4.1 USB charging Plug the CS61 into a USB power source using the attached USB cable. The CS61 battery lasts for up to 12 hours of talk time and takes approx. 3 hours to fully charge. 4.2 Automatic power off To preserve battery while unplugged, the CS61 will automatically power off when it has not been connected to a bluetooth device for 15 minutes.
4.3 Battery status To view the current battery status, press the Battery status button. The LED on the Battery status button, When the battery is full, the LED is Green, when the battery is medium, the LED is Blue, When the battery is low battery, the LED is Red, When the battery is very low battery, the Red LED is flashing.
5. How to connect 5.1 Connect to PC (Bluetooth) Plug the BT 100U into a USB port on your PC. The CS61 and the BT 100U are pre -paired and ready to use out of the box. The bluetooth range is 30m. 30m/100 ft For the CS61 to work correctly you may need to set the BT 100U as the audio device in your operating system’s audio settings. To manually pair the CS61 with the BT 100U, please use UC Manager.
5.2 Connect to PC (USB cable) Plug the CS61 into a USB port on your PC. You may need to set the CS61 as the playback device in your operating system’s audio settings. 5.3 Connect to smartphone Hold the Bluetooth button for 2 seconds and follow the voice-guided instructions to pair to your smartphone. The bluetooth range is 10m. 10 m/30 ft To disconnect or reconnect, Double tap the Bluetooth button again.
6. How to use Bluetooth Battery status Mute/ Voice assistant Volume Down Volume Up Busylight End Call Answer Call Power On/Off 6.1 Button visibility The buttons are backlit and only visible when the speakerphone is powered on. After 20 second of inactivity the buttons will fade, and can be reactivated by tapping the area where the buttons are located. The Voice assistant button, and Mute button will only be visible under certain conditions (e.g.
6.
6.
6.4 Voice assistant button By default, the voice assistant button will activate your smartphone’s voice assistant (Siri®, Google Now™, Cortana™,Xiaoai,Xiaoyi). When you press the voice assistant button, the button will turn Green light , and it will awaken the voice assistant.
7. Software 7.1 UC Manager UC Manager is PC software designed to support, manage and enable optimal functionality for VT devices. Download the latest version from vbet.
7.2 Update firmware Firmware updates improve performance or add new functionality to VT devices. 1. Connect the CS61 to a PC using the USB cable. 2. Install UC Manager on your PC. 3. Use UC Manger to check for the latest firmware updates.
8. Support 8.1 FAQ and technical specifications View the FAQ, certifications, and technical specifications at vbet.cn/conference-speaker/ 8.2 How to care for your VT device • The CS61 is for indoor use only. • Avoid storage at extreme temperatures (above 65°C/149°F or below -40°C/-40°F). • Do not expose the CS61 to rain or other liquids. • Do not cover the CS61 with stickers or labels.