EM500-UDL User Guide Safety Precautions Ursalink will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide. The device must not be disassembled or remodeled in any way. Please clarify your application environment before deployment so that the device can function well. The device is not intended to be used as a reference sensor, and Ursalink will not should responsibility for any damage which may result from inaccurate readings.
EM500-UDL User Guide Contents 1. Overview..........................................................................................................................................4 1.1 Description............................................................................................................................ 4 1.2 Features................................................................................................................................. 4 1.3 Specifications..........................
EM500-UDL User Guide 1. Overview 1.1 Description EM500-UDL is an outdoor environment monitoring sensor mainly used to measure distance without object interface contact. EM500-UDL device is battery powered and designed for multiple mounting ways. It is equipped with NFC (Near Field Communication) and can easily be configured from a smartphone or a PC software. Sensor data are transmitted in real-time using standard LoRaWAN protocol.
EM500-UDL User Guide Battery Life 6 year (10 min interval, SF12) >10 year (10 min interval, SF7) Operating Temperature -20°C to +70°C Relative Humidity 0% to 100% (non-condensing) Dimension 156.1 × 71 × 69.5 mm Mounting Pole, wall, DIN rail 1.4 Dimensions(mm) 2. Hardware Introduction 2.
EM500-UDL User Guide If any of the above items is missing or damaged, please contact your Ursalink sales representative. 2.2 Product Overview Front View: ①LoRa Antenna (Internal) ②NFC Area ③Ultrasonic Horn Back View: ④Battery (Internal) ⑤Wall Mounting Holes ⑥Pole Mounting Holes 3. Sensor Installation 3.1 Installation Location When installing EM500-UDL, please take in mind: Ensure the location of EM500-UDL is within the communication range of LoRaWAN gateway.
EM500-UDL User Guide 3.2 Wall Mounting 1. Attach the mounting bracket to the wall and drill. (Around 16mm) Note: The connecting line of two holes must be a horizon line. 2. Drive two screws into wall at the marks using screw driver. 3. Mount the device on the wall. 3.3 Pole Mounting 1. Loosen the hose clamp by turning the locking mechanism counter-clockwise. 2. Straighten out the hose clamp and slide it through the rectangular holes in the mounting bracket, wrap the hose clamp around the pole. 3.
EM500-UDL User Guide 3.4 DIN Rail Mounting Use 2 pieces of M3 × 6 flat head Phillips screws to fix the DIN rail to the device, and then hang the DIN rail on the mounting bracket. It is necessary to choose a standard bracket. 4. Turn ON/OFF the Sensor EM500-UDL can be turned ON/OFF via smartphone or computer with NFC (Near Field Communication) or button. Select one of following methods to turn on/off the sensor. 4.1 Turn ON/OFF via Smartphone APP 1.
EM500-UDL User Guide 4. Device information will be shown on the APP. 5. Switch the button of Device Status to turn on or off the device. 6. Enter the correct password (default password: 123456) and wait a few seconds until APP shows “Operate Successful!”. Note: Keep the two devices close together and do not move them in order that you can get the best connectivity as possible when turning on or off via NFC. No response can be caused by long distance, wrong location or rapid movement.
EM500-UDL User Guide 4.2 Turn ON/OFF via PC Software 1. Download Ursalink configuration software “Toolbox” and open the software. 2. Connect NFC reader to computer and attach the device to NFC reader. 3. Select type as NFC and serial port of NFC reader, then click “save”. 5. Device information will be shown on the software.
EM500-UDL User Guide 6. Click “Power On” to turn on the device or “Power Off” to turn off the device. 7. Enter password (default password:123456) and press Enter key to change device status. 4.3 Turn ON/OFF via Button 1. Remove screws on the bottom of EM500-UDL and take off the upper enclosure. 2. Find the button beside the battery. 3. Press the button until LED blinks to turn on or off the device. (about 3 seconds) Press the button until LED blinks rapidly to reset the device to factory default.
EM500-UDL User Guide 5.1.1 Read Configuration 1. Open APP “Toolbox” and click “Read” to read current information of device. 1. Attach the smartphone with NFC area to the device until the APP shows “Read Successful!”. Note: Failing to read can be caused by long distance, wrong location, or rapid movement. 5.1.2 Write Configuration 1. Open APP “Toolbox” and go to “Settings” page. 2. Change parameters as required and click “Write”.
EM500-UDL User Guide 3. Enter password (default password: 123456). 4. Attach the smartphone with NFC area to the device and wait a few seconds until APP shows “Write Successful!”. The device will automatically re-join the network if LoRaWAN paramters are changed. Note: Failing to write can be caused by long distance, wrong location, or rapid movement. 5.1.3 Template Settings Template settings are used for easy and quick device configuration in bulk.
EM500-UDL User Guide 2. Attach the smartphone with NFC area to another device. 3. Select the template file from Toolbox APP and click “Write”. 4. Enter password of this device and keep the two devices close until the APP shows “Write successful!”. 5. Slide the template item left to edit or delete the template.
EM500-UDL User Guide 5.2 Configuration via PC Make sure “Toolbox” is downloaded on your computer. 5.2.1 Read Configuration 1. Open software “Toolbox” and click “Read” to read current information of device. 3. Attach the device to the NFC reader until Toolbox shows “success”. Note: Failing to read can be caused by long distance, wrong location, or rapid movement. 5.2.2 Write Configuration 1. Go to “Settings” page to change parameters as requirements and click “save”. 2.
EM500-UDL User Guide 3.Press Enter key to write and attach the device close to NFC reader until “Write” button disappear. The device will automatically re-join the network if LoRaWAN paramters are changed. Note: Keep the two devices close and don’t move them in order that you can get the best connectivity as possible when writing data via NFC. Bad connection can be caused by long distance, wrong location, or rapid movement. 5.2.3 Upgrade 5.2.3.1 Upgrade Locally 1. Download firmware to your computer. 2.
EM500-UDL User Guide 5.2.3.2 FOTA 1. Make sure your computer can access the Internet. 2. Click “Check for Updates” to search for the latest firmware via computer Internet and upgrade. Note: Keep the two devices close and don’t move them in order that you can get the best connectivity as possible when upgrading. Failing to upgrade can be caused by long distance, wrong location, or rapid movement. 6.2.4 Template and Reset 6.2.4.1 Template Configuration 1.
EM500-UDL User Guide 3. Click “Browse” to select the correct template from computer. 4. Click “Import” to import the template to the device. 6.2.4.2 Reset Click the “Reset” to reset the setting to factory default.
EM500-UDL User Guide 6.Sensor Parameters (for App and PC) 6.1 LoRa WAN Settings 6.1.1 Basic Settings-OTAA Location: Ursalink ToolBox(PC): LoRaWAN Settings → Basic Ursalink ToolBox(APP): Device → Settings → LoRaWAN Settings Basic Settings-OTAA Item Description Enter the application EUI.The Network Server receives request and consults the entity associated with the App EUI APP EUI to validate the request.If permission is granted, it responds with a join-accept message. Select from: "OTAA" and "ABP".
EM500-UDL User Guide After sending the attribute/data/battery packets to the network server, the device will resend these packets if it does not receive ACK bit from the Network Server. Confirmed Mode ADR Note: If the device doesn't receive ACK for a long time, the device will resend confirmed packets 3 times at most. However, the device will resend attribute package all the time. ADR : Adaptive Data Rate. Enabled: The Network Server will adjust the datarate by MAC command.
EM500-UDL User Guide activated by personalization. Activation by personalization directly ties an end-device to a specific network by-passing the join request - join accept procedure. Device Address Network Session Key Application Session Key Enter the device address. The device address identifies the end-device within the current network. Enter the network session key of the device. The network session key specific for the end-device.
EM500-UDL User Guide LoRa frequency configuration is as follows if the sensor LoRa frequency is one of EU433/EU868/RU864/IN865/AS923/KR920: LoRa frequency configuration is as follows if the sensor LoRa frequency is one of CN470/US915/AU915: Enter the index of the channel to be enabled in the input box, separated by commas.
EM500-UDL User Guide For AU915: 64 channels numbered 0 to 63 utilize LoRa 125 kHz BW starting at 915.2 MHz and incrementing linearly by 0.2 MHz to 927.8. 8 channels numbered 64 to 71 utilizing LoRa 500 kHz BW starting at 915.9 MHz and incrementing linearly by 1.6 MHz to 927.1. For CN470: 80 channels numbered 0 to 79 utilize LoRa 125 kHz BW starting at 470.3 MHz and incrementing linearly by 0.2 MHz to 486.1. 16 channels numbered 80 to 95 utilize LoRa 125 kHz BW starting at 486.
EM500-UDL User Guide Prevention Set Value Setting value=| A - B | / C * 100%. ( A=current measured value; B=previous measured val ue; C=maximum range) If the current measured value exceeds the set value after calculation by the previous formula, it is abnorm al and device will measure again. Null 6.2.
EM500-UDL User Guide 7.2 Add a Ursalink LoRaWAN Gateway 1. Enable “Ursalink” type network server and “Ursalink Cloud” mode in gateway web GUI. Note: Ensure gateway has accessed the Internet.
EM500-UDL User Guide 2.Go to “My Devices->Gateway” of Ursalink Cloud and click “Add” to add gateway to Ursalink Cloud via SN. 3.Check if gateway is online in Ursalink Cloud. 7.3 Add EM500-UDL to Cloud 1. Go to “Device->My Devices” and click “Add Device”. Fill in the SN of EM500-UDL and select associated gateway.
EM500-UDL User Guide 2. After EM500-UDL is connected to Ursalink Cloud, Click or “History Data” to check the data on Ursalink cloud. 3.Go to “Dashboard” page to add dashboard.
EM500-UDL User Guide EM500-UDL User Guide FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.