User Manual ACE V1 Thermal Printer Xiamen Rongta Technology Co., Ltd.
Contents I. Instructions............................................................................................................................3 1.1. Safety warnings........................................................................................................... 3 1.2 Precautions................................................................................................................... 3 II. Main features..................................................................................
I. Instructions ACE V1 printer is POS directly thermal receipt printer, which is easy to operate and cost-effective. They are widely used in such various fields as shopping malls, supermarkets, hospitals, canteens, banks, gas stations, tollbooth of roads and bridges, etc. Safety notes: Before using the printer, please read the following instructions carefully and adherence to the reference strictly. 1.1. Safety warnings Warning: Don’t touch the cutter or tearer of the printer.
II. Main features 350mm/s high speed printing Support human error reporting function Support cashbox driving, NFC function; cloud Attractive appearance, fashionable and commercial printing is available. Installed with data buffers, printing data can be Reasonable structure, convenient in operation andreceived when printing maintenance Characters can be printed in amplified, bold and Support USB, serial port, Ethernet, and cashboxunderline form.
Paper available Linerless paper, black-mark paper, label paper, continuous paper Cloud printing Options Chinese character library international first and second level International code page Printing paper index of 24x24 points ， 300 (width) x 3.00 (height) mm Support international languages such as PC437、Katakana、PC850、PC860、 PC863PC865 、 WPC1252 、 PC866 、 PC852、PC858etc. Barcode printing Support the barcode printing of UPC-A、UPC-E、EAN(JAN)13、EAN ( JAN)8、CODE39、CODABAR、ITF、 CODE93、CODE128, etc.
Environmental adaptation Operating temperature: 0~40°C Storage temperature: -20~70°C Operating relative humidity: 20~70% Storage relative humidity: 5~95% IV. Installation and operation of the printer 4.1 Unsealing of the printer Main engine Power adapter Power cord Quick install guide Paper roll Disk Communication cable Warranty card Parts inspection: please check the whole set of parts before opening the box. If there are any missing parts, please contact the supplier or manufacturer. 4.
Notes 1. First plug in the printer power plug DC24V, then connect AC220V power supply, after that open the power source switch. Pay attention to the order, otherwise the machine might be damaged. 2. Using inappropriate power adapter will affect the printing quality and even damage the printer. 3. Don’t plug the telephone line to the cashbox port, otherwise both the printer and the telephone are likely to be damaged. 4.
4.4 Installation of label paper The installation method of thermal label paper (MAX8.0 mm) is as follow: Open the cover and turn the lever open the front cover of the printer Make sure the front cover has been opened correct direction wrong direction As is shown in the picture, put label paper roller onto paper shaft, adjust the washer and make sure the paper roller on the left; pull out the paper roller Close the front cover of the printer, and press ahead of the front cover.
Settings of each DIP switch Switches Functions On Off 1 Cutter No cutter Cutter Voice prompt Turn on the voice buzzing Turn off the voice buzzing 3 Printing density High density Normal density 4 24 character mode No Chinese With Chinese 5 printed characters of each line 42 48 Select the cashbox Open the cashbox Close the cashbox 2 6 Transmission speed (serial port valid) (refer to the table below) Transmission Speed (bps) SW-7 SW-8 38400 ON ON 115200 OFF ON 9600 ON OFF
VI. Cashbox port of the printer Cashbox port of the printer uses Rj-11, 6-line socket, output DC 24V/1A power signal to drive the cashbox. Plug the RJ-1 Crystal head of the cashbox into the cashbox port, then the cashbox can be opened through the printer. The definition of Pin function of Cashbox port of the printer is as follow: Pin NO. Signal Flow direction 1 No No 2 Structurally Output 3 No No 4 Cashbox driving signal Output 5 No No 6 No No VII. Printer cleaning 7.
7.2 Cleaning sensor When one of the situations occur, the PE Sensor shall be cleaned During printing, the printer will stop printing occasionally and give a warning of lack of paper. No warning when lack of paper Steps of cleaning the PE Sensor 1. Turn off the power of the printer, open the upper cover, if there is paper, remove the paper. 2. Dip the soft cotton cloth into absolute ethyl alcohol(wring up) to remove the dust and taint of printer head; 3.
VIII. Paper jam elimination method When paper jam occurs, shut down the power of the printer first, then open the upper cover of the printer. After the cooling down of the printer head, remove the paper stuck in the printer, and feed paper correctly and close the upper cover. Select the recommended paper or paper of the same quality, paper confirm to the specified width, the chances of paper jam will be greatly reduced. IX.
X. Printer driver There are two kinds of driving mode running ACE V1, one is to install driver directly under Windows9x/ME/2000/XP, another is to drive the printer with internet access directly. 10.1 Driver installation under Windows Add printer to Windows and assign the driving document in the driving disk to Windows. You can start to print by executing printing order in the program. Under this way, it is printed by the driving program of Windows printer transferring characters to graphics dot-matrix. 10.
Ⅻ. Requirement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Service hotline 400-800-0596 Xiamen Rongta Technology Co., Ltd. Official website: www.rongtatech.
