To Customers Thank you very much for using our FM VHF/UHF Two Way Radio. This radio of modern design is reasonable structure with stable functions. It is designed to meet customer's needs for the high quality with easy operation and perfect capability. We believe you are pleased with the finished shape and the reasonable price. This manual is suitable for using the model of PX-568. CAUTIONS: z z z z z z z z Before use this radio may need get local government authorization.
CHARGING THE BATTERY PACK The battery pack is not charged at the factory; charge it before use. Initially charging the battery pack after purchase or extended storage will not bring the battery pack to its normal operating capacity. After repeating the charge/discharge cycle two or three times, the capacity will increase to best status. You should charge or change the battery pack if the battery’s power is weak. CAUTION 》Use the original battery pack only.
If the transceiver indicator displays ,it means the battery pack is out of power, please charge it. Please always use the original charger. The charger’s indicator shows the charging status below. INDICATOR DISPLAY STATUS RED CHARGING GREEN COMPLETED Please charge the battery pack as follow, 1. Put the DC plug of the transformer into the DC socket of the charger unit. 2. Connected the supplied transformer to the AC jack 3. Slide the battery or the transceiver with a battery pack into the charger. 4.
Match the top of the battery pack with the corresponding grooves on the radio. Push the battery onto the bottom of the radio,buckle the safety lock. To remove the battery pack, lift the safety lock and pull the battery pack away from the radio. INSTALL ANTENNA Hold the radio, screw the antenna into the connector on the top of the radio. Hold the antenna and turn it clockwise until being tight.
Without installing the belt clip, the installing area will become hot due to continuous communication or put in hot environment. You should remove the belt clip first before disassemble the battery pack. belt clip Caution: Please don’t use glue to fix the screws of belt clip, otherwise it may ruin the housing! INSTALL SPEAKER/MICROPHONE Insert the speaker/microphone plugs into the speaker/microphone jack. Note: The radio is not entirely waterproof when use the speaker/microphone.
GETTING ACQUAINTED ANTENNA EMERGENCY CALL LED INDICATOR.: Lights red while transmitting. Lights green while receiving. SPEAKER PTT(push to talk) BUTTON Press this key, then speak into the microphone to call. Release it to receive. SIDE 3 KEY/SIDE 4 KEY use to define various of functions CHANNEL SWITCH Rotate to select a channel from 1 to 128 POWER SWITCH/VOLUME CONTROL Turn clockwise to switch on the transceiver. Rotate to adjust the volume. To switch off the transceiver, turn counterclockwise fully.
MICROPHONE FUN(function key) SPEAKER/MICROPHONE JACK BATTERY PACK Battery power indicator TX offset direction in relation to the Rx frequency TX offset direction in relation to the Rx frequency Keypad locked DCS tone CTCSS tone Priority scan High/Lower power Scrambler VOX Menu function Received signal strength and TX power Frequency display Turn on and off the power/ Adjusting volume If you want to turn on the power, rotate the PWR/VOL knob clockwise until a beep sound is heard .
● Mode Selection Press ENTER key and turn on the radio at the same time. You can switch between channel mode and frequency mode. On frequency mode press VFO/MR key, you can switch between frequency mode and “Memory mode+Frequency mode”(VFO) mode. Talk Around Talk around allows you to communicate directly with other radios without the repeater. When using talk around, the transmitting frequency is same with receive frequency. The CTCSS code is also same.
● on-site alarm Press the emergency call button, radio sounds alarm tone, while sending the alarm tone and ANI personal identification code to your partner, press [PTT] key to cancel the alarm. Spread frequency by manual Hold on FUN+SIDE KEY 4 and turn on the radio at the same time, the display will show”SELF” then input the password “5858”. The display will show the minimum frequency and maximum frequency. Input the frequency you need by keypad and press ENT key to confirm.
1) As the function key, when the keypad is locked, hold on [FUN] key and rotate the knob to enter the menu function, release [FUN] key and press [ENT] key to enter the menu operation. 2) As the storage key: In frequency mode, setting all information in frequency mode, press FUN key and press VFO/MR key until “F” icon and channel number flashing on top right corner, rotate the knob to store the frequency and setting on the channel you want to stored. press VFO/MR key to finish the channel store.
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 POW(TX power) SQL(Squelch level) SCRM(scrambler) LED(backlight on/off) BEEP(keytone) ANI(Automatic Number identification) KEYBO(keyboard lock) TOT(time out timer) SCANS(scan mode) VOICE(voice guide) OFFSET(offset setting) C-CDC(RX/TX CTCSS/DCS) R-CDC(RX CTCSS/DCS) T-CDC(TX CTCSS/DCS) S-D(+/- offset) STEP(frequency step) NW(wide/narrow band) NAME(channel name edit) ROGER(call end tone) HIGH/LOW 0-9 OFF/1-8 scrambler groups OFF/AUTO/ON ON/OFF OFF/ON MANUAL/
VOX SENSITIVITY(VOX) VOX allows you to perform transmission by voices activation without pressing PTT key, and the radio will stop transmission automatically after the talk ends. Under channel/frequency mode, hold on [FUN] key and [3VOX] key, the display will show “VOX?,” and press [ENT] key then press the number keys(0-9) or turn the channel switch to select the sensitivity level you need, select “OFF” means close the VOX function. Press [ENT] key to confirm and press [VFO/MR] to exit.
Under frequency/channel mode, press [FUN]+[0ANI] key, the screen will show “ANI?”, press [ENT] then turn the channel switch to select “OFF/ON”, select “OFF” It means the ANI function is off, select “ON” it means ANI function is on. After selection press [ENT] key to confirm, press [VFO/MR] key to exit.
Under frequency/channel mode, press [FUN]+[9SET] key to enter the menu mode, turn the channel switch to select the thirteenth item, the screen will show “VOICE?”, Press [ENT] key and turn the channel switch to select “OFF/CHS/ENG”, if you select “OFF”, it means turn off the VOICE GUIDE function. After selection press [ENT] key to confirm and press[VFO/MR] to exit. FREQUENCY DIFFERENCE Choose the difference between transmitting frequency and receiving frequency.
select the normal (N) or inverted (I) DCS codes. After selection, press [ENT] key to confirm and press [VFO/MR] key to exit. FREQUENCY DIRECTION Under frequency mode, press [FUN]+[9SET] key to enter the menu mode, turn the channel switch to the eighteenth item, the screen will show “S-D?”, press [ENT] key and turn the channel switch to select “0/+/-“,(+) indicates increasing frequency,(-) indicates reducing frequency and (0) indicates identical frequency.
DTMF CODE This radio has DTMF function, under channel/frequency mode, in the transmitting status, input the number on the keypad or other function key, then it will have the corresponding DTMF code issue. The DTMF code issued by the function keys are as follow: FUN A SIDE KEY 4 C SIDE KEY 3 B EMERGENCY KEY D DTMF/MSK/5-Tone Operation Using DTMF/5-Tone to achieve select call/STUN/remove STUN etc.function.
radio will start to receive, turn of the speaker and you can hear the voice from your partner. 2) DTMF encoder: You can set by programming software and 9 groups available. You can input the characters0-9/A-D、* and #,and 16 bits for each group. DTMF select call ID code without A-F characters, but group call and broadcast call ID code with A-F characters.
Technical specification General Frequency Range 138MHz-174MHz,400-500MHz Working Temperate Operating Voltage Operate Mode Dimension Weight Antenna impedance -25℃―+55℃ DC 7.4V Same frequency/different frequency simplex 115mm×55mm×35mm (Not included Antenna) 238g (Including battery) 50Ω Transmitter Carrier Frequency Tolerance Carrier Output Power Modulation limit Audio Distortion Modulation Character Adjacent Channel Power Spurious Radiation Occupied Bandwidth ±250Hz H≦ 5W L≦1W ≦2.5KHz@12.
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
onctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna. Use only Xiamen Puxing Electronics Science&Technology Co., Ltd approved supplied or replacement antennas, batteries, and accessories.