Interactive Touch Screen INSTRUCTION MANUAL FCC ID: 2ADID-LE-86PC93 Contains the module's FCC ID: 2ADID-WP0DR1110 Contains the module's FCC ID: 2ADID-BT03B110 Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.
Contents Important Information 1 Important Safety Precautions 2 Important Notice 4 Identification of Controls 5 Remote Control 6 Setting Up 7 Connections 8 Basic Operations 10 Device Settings 12 Network Settings 13 Menu List 19 Using USB Multi Media Player 21 Troubleshooting 24 Specifications 25
IMPORTANT INFORMATION If the screen is not positioned in a stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ! Use cabinets or stands recommended by the manufacturer of the screen. ! Only use furniture that can safely support the screen . ! Ensure the screen is not hanging over the edge of the supporting furniture.
Important Safety Precautions Electricity may cause personal injuries and property damage if improperly handled. The screen has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
Important Safety Precautions (Continued) Legal notices 17. Lightning---Unplug this apparatus during a thunder storm or when unused for long periods of time. For added protection during a thunder storm, or when the screen is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. 18.
Important Notice About Location/ Environment Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or cold location.
Identification of Controls 8 1. 2. :Switch the screen power on or standby. : Press the button to display input source menu or exit the menu screen. 3. : Press the button to return to previous menu. 4. : Press the button to display desktop (Home page) on the screen. 5. : Press the button to open the setting menu. 6. : Press the button to turn down the volume. 7. : Press the button to turn up the volume. 8.USB(2.
Remote Control Switch the screen power on or Standby Switch to AV mode Switch to TV mode Note: If no RF, this button has no function. Switch to VGA mode Switch to HDMI mode Display or exit the current program information Select sound mode Select picture mode Select aspect ratio 0-9 number buttons Display or exit input source menu Return to the previous channel Note: If no RF, this button has no function.
Setting Up Installing remote control Batteries To install remote control batteries: 1 Open the battery cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the cover. Battery precautions: Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Connections Cautions Before Connecting = When connecting an external device to the screen, make sure that the screen and the device are turned off. = Check the plugs at the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the screen. = Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. = The illustration of the external device may be different depending on your model.
Connections VGA cable Monitor VGA cable VGA 1 PC OUT PC, etc. VGA devices PC IN 1 Audio cable VGA cable Audio cable VGA 2 PC IN 2 USB cable 3.0 USB devices HDMI 1 (MHL) HDMI cable HDMI devices HDMI cable HDMI 2 (ARC) DP cable DP devices DP IN Tighten the WiFi antenna in clockwise direction. The WiFi antenna is able to access WiFi network. Inside AP. When network cable is plugged in WAN port, the antenna will generate WiFi network. 2.0 USB 2.
Basic Operations Turning the screen on or off 1 Plug the power cord into an AC Power outlet. Press Power Switch on the screen. 2 Now the screen is in standby mode. Wait a moment until the power indicator lights up, then press POWER to turn on the screen. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER button then the screen may not respond or act wrongly.) 3 Press button again to turn off the screen and put the screen in standby mode.
Basic Operations(Continued) Home Menu Overview In all applications, press and drag the icon to on Home page for shortcut created, press and drag the shortcut to X for shortcut deleted. Shortcuts you created on Home page Show all applications Note: When using the app Camera, store the data onto your connected USB device. If USB device is not connected , store the data onto the built-in storage. ES File Explorer Go to your web Browser Long press on the screen will call the wallpapers and widgets menu.
Device Settings Show all apps Network Setting Daydream setting Display system Storage Display information of the unit To set default input method To set Android keyboard(AOSP) To set on-screen language To set Date and time Note: To manually set date and time, you should toggle “Automatic Date & time” to OFF. Automatic search for Bluetooth devices To set Security and Restrictions Allow installation of apps from sources other than the Play Store.
Network Settings Set the Built-in WiFi Ethernet setting Internal routing setting IP settings Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button. Reset Internal Router by hardware. Password is required for this operation and is the same password to access Lock menu. (The default password is 0000) Proxy settings Change the UserName and Password: Select Management, then Password.
Network Settings(Continued) Wired Network Setting (Internal router) Method 1: Easy Setup Wizard Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button. Select Gateway Select Easy Setup Wizard Next Password Setting Format Finished WiFi Password of Internal Router in the screen. (Password should be set at least 8 characters.
Network Settings(Continued) Wired Network Setting (Internal router) Method 2: Advanced Mode Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button. Select Advanced Mode Select Setup Wizard Select Gateway Next Next Next Recommended to select AP Next Next Next Password Setting Format WiFi Password of Internal Router in the screen. (Password should be set at least 8 characters.
Network Settings(Continued) Wireless Network Setting (Internal router) Method 1: Easy Setup Wizard Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button. Select Wireless ISP Select Easy Setup Wizard Next There are five methods to connect with network, choose your preferred one. Recommended to select the DHCP Client connection. Automatically obtain IP information from your ISP.
Network Settings(Continued) Wireless Network Setting (Internal router) Method 2: Advanced mode Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button. Select Advanced Mode Select Wireless ISP Select Setup Wizard Next Next Next Password Setting Format. Wi-Fi Password of Internal Router in the screen. (Password should be set at least 8 characters. ) There are five methods to connect with network, choose your preferred one.
Network Settings(Continued) Wireless Network Setting (Built-in WiFi card) Turn on or off the built-in WiFi Display all of the WiFi sites avaible Connect to WPS (WiFi Protected Setup) router Add a new network manually Scanning WiFi direct device Setting Portable WiFi hotspot Setting Mcast 18
Menu List Adjusting Picture mode Picture Picture Mode Select your favourite picture mode for each input [Standard] / [Soft] / [User] / [Game] / [Writing] / [Dynamic]. Contrast Brightness Adjust the contrast. Hue Sharpness Adjust the image hue. (Only for NTSC system) Saturation Adjust the color saturation. Backlight Set up the overall brilliance of the screen. Energy Save The backlight brightness is decreased. Adjust the brightness. Adjust the sharpness. Adjust the screen size.
Menu List Adjusting Setting menu Setting Source Auto Switch Select On to automatically recognition source. Color Range Select color range. (Only for HDMI mode) MHL Auto Switch Select On to automatically switch to the MHL input when it connected. HDMI_ARC Select On to turn on enable HDMI_ARC. Movie Mode Turn on/off the movie mode. Menu Timeout Select OSD menu display time. Date / Time Display Date and Time. Off Timer Set Off timer to switch the screen to standby at a specified time.
Using USB Multi Media Player Using USB multi media player You can connect a USB storage device to your screen to view compatible photo, movie or play compatible music so that the sound can be output from the screen’s speaker. To use USB multi media player, please go to USB source by pressing USB button. Or you can press Home button to display Home Page and then select USBDrive icon to access. Notes: Never remove the USB storage device or turn off the screen while using the USB storage device.
Using USB Multi Media Player Playing Photo With the photo viewer, you can view compatible photos (in JPG, BMP or PNG format). Also you can zoom, rotate photo, etc. Previous photo Play/pause Next photo Zoom in Zoom out Note: You can also use (Play/Pause), (STOP), Show information Rotate clockwise Rotate anti-clockwise (Previous), (Next) on the remote control to operate. Playing Music With the USB music player, you can play compatible music (in MP3 or AAC format).
Using USB Multi Media Player Playing Movie With the USB movie player, you can play compatible movie (in AVI, MPG, MPEG, DAT, MP4, TS, RM/RMVB, or MKV/MOV format). Previous movie Fast reverse Play/pause Fast forward Next movie Skip to specific point by input time Select sound mode Select aspect ratio Select picture mode Adjust the volume AB Section repeat Playing settings Show playlist Show information 23 Now AB repeat starts. To cancel, highlight Section replay and toggle it to OFF.
Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your screen, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Possible Solutions ! The batteries could be weak. Replace the batteries. ! Check the orientation of the batteries. ! Make sure the power cord is plugged in.
Specifications AC 100-240 V, 50 / 60 Hz Power Consumption Power Source 5.2 A 6.5 A < 0.5 W < 0.5 W < 0.5 W 1,920 (W) × 1,080 (H) 3,840 (W) × 2,160 (H) 3,840 (W) × 2,160 (H) 65 inches(diagonal) 75 inches(diagonal) 86 inches(diagonal) Unit: mm 1527 X 113.7 X 903 1749 X 105.3 X 1029 2007 X 125 X 1179 Mass 54 kg Net 86 kg Net 115 kg Net Display panel 2.8 A Current Max.
