LED touch display Operating Manual Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.
Contents Important Information 1 Important Safety Precautions 2 Important Notice 4 Identification of Controls 5 Remote Control 6 Connections 8 Basic Operations 11 Picture Adjustment 13 Audio Adjustment 15 Adjusting Basic Settings & Adjusting Computer Settings 16 Troubleshooting 17 Specifications 18
CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger displays are popular purchases. However, displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 17 The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus. WARNING This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your IFP. This label is located on the back of your display.
Important Safety Precautions (Continued) CAUTION Damage requiring service Unplug this display from the power outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled or objects have fallen into your display . • If your display has been exposed to rain or water. • If your display does not operate normally by following the operating instructions.
Important Notice About Location/ Environment Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or cold location.
Identification of Controls Main Unit (front/side view) 1. Power Indicator 2. Remote Sensor 3. / In the menu operations, these buttons serve as up/down buttons. 4. VOL+/Press the VOL+ or VOL- button to increase or decrease the sound volume level; In the menu operations, these buttons serve as right/left buttons. 12 5. MENU 3 Press this button to access the main menu screen. 6. INPUT To access Input Source menu 4 7. POWER 5 Press this button to turn the unit ON from STANDBY mode.
Remote Control Remote control unit INPUT 11 1 2 3 1. INPUT: Displays Input Source menu. 2. 0 – 9 number buttons 1 2 3 3. FAV: Press to open the Favorite List you set up. 4 5 6 4. MENU: Open the main menu or return to the previous menu. 7 8 9 FAV 0 MENU 5. 5 /6 /3 /4 /OK: Press the arrows to navigate through the menus or adjust an item. Press OK to confirm a selection or enter a sub-menu. 12 7. PICTURE: Selects picture mode. MUTE 13 4 6. FREEZE: This button has no function. 8.
Remote Control (Continued) Installing remote control batteries To install remote control batteries: 1 Open the battery cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the cover. Battery precautions: Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Connections Cautions Before Connecting = When connecting an external device to the display, make sure that the display and the device is turned off. = Check the plugs on the ends of the cables to make sure that they are the correct type before you try to plug them into the jacks on the display. = Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. = The illustration of the external device may be different depending on your model.
Connections (Continued) Connecting Headphones USB TOUCH HDMI 1 To connect headphones: Insert the plug of the headphone into the display’s Headphone jack. When using headphones, adjust the headphone volume to avoid excessive volume levels, as hearing damage may result. HDMI 2 Headphones USB Service only Connecting a camcorder or game console To connect a camcorder or game console: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the display and the camcorder or game console.
Connections (Continued) Connecting a computer To connect a computer: Connect a VGA cable between the VGA jack on the computer and the VGA input jack on the display. Connect an Audio cable between the AUDIO output jack on the computer and AUDIO input jack on the display. To play video from the computer: 1. Turn on your display and press the INPUT button. The Input Source menu will open. VGA cable (analog RGB) 2. Press 5 or 6 to select VGA and press OK to confirm.
Basic Operations Turning the display on or off To turn the display on or off: 1 Plug the power cord into an AC power outlet. 2 Now the unit is in standby mode. Wait a few seconds until the power indicator lights up and press POWER to turn on the display. (Be sure to wait a few seconds before pressing POWER button. If you promptly press POWER button then the display may not respond. 3 Press POWER button again to turn off the display and put the display in standby mode.
Basic Operations (Continued) On-screen menu overview AUDIO menu PICTURE menu PICTURE AUDIO CHANNEL Picture Mode PICTURE SETTING AUDIO CHANNEL Sound Mode User SETTING User Contrast 50 Sound Mode Setup Brightness 50 Balance Color 60 Auto Volume Off Sharpness 50 Surround Sound Off Hue 50 Reset Audio Settings 0 Advanced Video SELECT MOVE MOVE RETURN SELECT RETURN SETTING menu PICTURE AUDIO CHANNEL SETTING OSD Duration Off Sleep Timer Off Computer Settings Reset to De
Picture Adjustment Adjusting the Picture 1 Press MENU and the main menu screen displays. PICTURE AUDIO CHANNEL SETTING Picture Mode User Contrast 50 Brightness 50 Color 60 Sharpness 50 Hue 50 or4 to select the PICTURE menu and press6 or OK to 2 Press 3 access the menu. or6 to select items, press3 ,4 or OK to 3 Within the menu, press5 access and press 5 6 3 4 to adjust the selected item. If a submenu exists, press 4 or OK to open it, then use 5 6 3 4 OK to operate.
Picture Adjustment (Continued) Advanced Video Adjustment or OK to access the menu. 1 Navigate to the PICTURE menu, press 6 PICTURE AUDIO CHANNEL Picture Mode SETTING User Contrast 50 Brightness 50 Color 60 Sharpness 50 Hue 50 PICTURE access.
Audio Adjustment Adjusting the Sound 1 Press MENU and the main menu screen displays. PICTURE AUDIO CHANNEL Sound Mode SETTING User Sound Mode Setup Balance access the menu. 0 Auto Volume Off Surround Sound Off Reset Audio Settings MOVE or4 to select the AUDIO menu and press6 or OK to 2 Press 3 SELECT or6 to select items, press3 ,4 or OK to 3 Within the menu, press5 access and press 5 6 3 4 to adjust the selected item.
Adjusting Basic Settings & Adjusting Computer Settings Adjusting basic options 1 Press MENU and the main menu screen displays. PICTURE AUDIO CHANNEL SETTING OSD Duration Off Sleep Timer Off Computer Settings access the menu. or6 to select items, press3 ,4 or OK to 3 Within the menu, press5 Reset to Default access and press 5 6 3 4 to adjust the selected item. If a submenu exists, press 4 or OK to open it and use 5 6 3 4 OK to operate it.
Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your television, please call the local services center in your area. Before calling the service center, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Possible Solutions ! The batteries could be weak. Replace the batteries. ! Check the orientation of the batteries. ! Make sure the power cord is plugged in.
Specifications Type: LED touch display Panel: 55” Power Supply: ~120 V, 60 Hz Rating: 1.7A Dimensions (W x H x D): 1289.8 × 792 × 64 mm Weight: 36.3 kg Terminals: AV in ( AV shared with COMPONENT IN) COMPONENT in (1) PC in (1) HDMI in (2) Headphone (1) USB Service port (1) USB Touch port (1) Note: 1. Design and specifications are subject to change without notice. 2. Weight and dimensions shown are approximate. 3.
PRINTED ON RECYCLED PAPER
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.