Specification Sheet Product Name:Tablet Stand Model No:SC1306 FCC ID: 2AW2K-SC-306 Cautions! Warning!-To prevent the risk of fire or electric shock, do not expose this product in rain or moisture. Warning!-Do not disassemble this product; otherwise it may cause electric shock.
1.Product Overview 2.Specification 3.Operation Instruction 4.Installation instruction 5.Cautions 1.Product Overview Tablet enclosure Position of swiping card Stand The product is controlled by single chip microcomputer, thus working status is timely indicated via LED backlight indication and buzzer sound. IPad installed is intelligent charging, and the charging current can reach 5V/2.1A while with protection of overcharge, overvoltage and overcurrent charging.
1.Swipe the primarycard in red color (less than 3 seconds) 2.Swipe the unassociated cards in black color. Every time you add a secondary card. When the blue light flashes once and buzzer sounds once, it means this secondary card is added. Every time, after you added a secondary card, it should swipe the primary card to confirm. Only after confirmed by the primary card, the secondary card is added successfully. The secondary cards 10 Add 3.
3.During the setting process, swipe in the "associated card" or wait for the setting to time out to exit the shortcut setting (the associated cardsare valid). or The buzzer will sound three times and the red light will flash three times if the primary and secondary cards are addedunsuccessfully. b) Delete cards Card Type Qty Function Deletion method Keep swiping the primary card until the blue light off and red light on.
deleted successfully. Note: Once delete the primary card, all secondary cards are also deleted automatically. Loss of primary card: Swipe one secondary card five times in a row within 10 seconds after power-on. Every time, buzzer will sound once and red light flash once. After 5 times operation, all card information will be deleted. And then cut off the power. The primary card and secondary cards can be added after power on again.
b) Stand Mounting g c) Front panel disassembly
d) Frontpanel Insttallation e) Productusage The eseparatedp panelusage The ewholetablettstandassem mblyandusag ge f) RFID Instruction Swllpe the card before take e out the pan nel The e sound prom mpt and ligh ht color prom mpt when tak ke out and assemb the p panel.
5.Attention 5 n matters a) Whe en swiping with w the prim mary card, pu ut the primarry card on sw wipingposition of stand at first, and the electronic e sw witch is turne ed on after taken t the ca ard away from swiping p position. b) Whe en swiping with w the seco ondary card, put the prim mary card on n swipingpossition of stan nd at first, an nd the electronic e sw witch is turne ed, then the e tablet enclo osure can be e removed.