TO REDUCE the product’s enclosure,it SHOCK. DO NOT REMOVE COVER(OR BACK).REFER SERVICING TO QUALIFIED SERVICE RERSONNEL. maintenance(servicing) risk of electric shock to To reduce the risk of fire or electric shock, do not expose this apparatus to rain or To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains and etc. Do not place lighted candles on the apparatus.
1. LED Display Window 2. Volume Control Knob 3. Stand By Adjustment Knob 4. Tuner Adjustment Knob 5. Virtual Surround Adjustment Knob 6. Mute Adjustment Knob 7.
1. SLEEP MODE SELECTOR 2. INPUT MODE SELECTOR 3. BASS VOLUME ADJUST SELECTOR 4. TUNER CONTROL AREA 5. BLUETOOTH CONTROL AREA SELECTOR 6. MUTE CONTROL SELECTOR 7. TREBLE VOLUME ADJUST SELECTOR 8. SUBWOOFER VOLUME ADJUST SELECTOR (FOR ACTICE SUBWOOFER) 9. VIRTUAL SURROUND CONTROL SELECTOR 10. SURROUND VOLUME ADJUST SELECTOR 11. FRONT VOLUME ADJUST SELECTOR 12. CENTER VOLUME ADJUST SELECTOR Since the remote control will be used for many units to control operations, you should 4.
First please connect the AC adaptor to the unit. Then press ” ” key or press the standby button on the front panel, system will work normally. Sleep mode allows you to make the system sleep at a selected time. 1. Press” “ key or press the standby button on the front panel to select sleep mode. 2. Wake up the system by pressing the same key when the system in the sleep mode. Press the” “ key on the front panel to adjust the main channel volume. Press the “ “ to adjust the treble volume.
1.Press the ,display ”ON”: analogy five channel signal 1.Press the ,display ”ON”: analogy five channel signal 2.Press the ,display ”OFF”: 2.1CH output 2.Press the ,display ”OFF”: 2.1CH output 1.Press the ,display ”ON”: analogy five channel signal 1.Press the ,display ”ON”: analogy five channel signal 2.Press the ,display ”OFF”: Real five channel signal 2.Press the ,display ”OFF”: 2.1CH output It does not exist. Get real 5.1ch output only in HDMI mode. Audio source must be real 5.1ch to get 5.1ch signal.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.