Instruction Manual Model No. OS-Pro Omni Before operating this unit, please read these instructions completely.
Contents Before Use Safety Precautions ……………………..…….......................................... 1-3 3 FCC Radiation Exposure Statement Chair Components ……………………..…….......................................... 4-6 5 Bluetooth Speaker Setting up the massage chair ……………………..……......................... 7-8 Assembly ……………………..……........................................................ 9-12 Preparation before Use ……………………..…….................................. 13-14 How to Use Controller ……………………..……..............
Safety Precautions When using the massage chair, basic precautions should always be followed to reduce the risk of electric shock, burns, fire or injury to persons. Please read the following precautions before using the massage chair. reduce the risk of short-circuit and fire. damage.
Safety Precautions Please consult your doctor if you are in doubt as to whether or not you should use this massage chair.
FCC Radiation Exposure Statement FCC Radiation Exposure Statement: (mobile device) This equipment complies with FCC radiation exposure limits set forth for an % " @ FCC radio frequency exposure limits, Human proximity to the antenna shall " [+ ;\ < % FCC STATEMENT ]% X ]^ '$$ > % ") the following two conditions: ;]<
Chair Components Front 1 2 3 4 5 6 7 1 Pillow Pad 2 | V ;V X ^< 3 Shoulder side massage section 4 Backrest Pad 5 Hand and arm massage section 6 Seat 7 Legrest 4
Chair Components Bluetooth Speaker NOTE: " " % X " ) it as well.
Chair Components Air Massage Area 6 Air bags 4 Air bags 2 Heat 12 Air bags 8 Air bags 2 Footroller Air bag Heat 6 Foot Roller
Setting up the massage chair 1. Installation Position. Ensure there is adequate space to recline. BU MFBTU ” BU MFBTU ” "QQSPY ą Product's area in contact with the floor. Footrest's area in contact with the floor. @ ! such as in front of heating sources, because this can cause discoloration or hardening of the synthetic leather.
Setting up the massage chair 2. Remove all the contents from the 3 boxes. Collect all the units and the accessories.
Assembly 1. Attach the side panels.
Assembly ⑤ > " % 3. Attach the legrest.
Assembly G1 G2 E1 F1 E2 F2 H1 Circlip H2 4. Attach the backrest pad. ① # % ② Connect the wire J1 to J2. ③ Zip the zipper on the top of backrest. ④ # " % ⑤ Zip the zipper connecting legrest and seat cushion.
Assembly J2 J1 J2 Installation completed.
Preparation before Use 1. Check the space around the product. Make sure there is no person, pet, or other object close to the product. 2. Make sure there is no foreign matter in the seams of the product. | ! " any two parts of it.
Preparation before Use 3. Power on the product 1 Push the power connector into the appliance inlet till the end. 2 Insert the power plug into the power outlet till the end. * ~ ~ 1 3 2 4. Make sure the massage rollers are retracted. If they are not, press ON button to return them to the retracting position.
How to Use Controller 1. Power 2. Timer 3. Pause 4. 5. Stretch 6. Calm 7. Relax 8. Wake Up 9. Sleeping 10-11. Width 12-13. Position 14. Spot/Partial ]^% 16. Manual ]% 18. Intensity 19. Speed 20. Strength 21. Full Air 22. Partial Air 23. Heat 24. Foot Roller 25. Recline/Footrest lift 26. Incline/Footrest drop 2 ;X]< ;X]< 1 3 5 4 6 7 8 12 10 ;X]< ;X]< ;X]< ;X]< ;X]< ;X]< ;X]< ;X]< ;X]< ;X]< ;X]\< ;X]\< ;X]\< 15 9 14 11 13 16 ;X]\< ;X]< 18 21 19 22
How to Use Programs Description 1.Power V % X % > " % " " ! at a default time of 15 minutes. X ! position. 2.
How to Use 7.Relax Engages the full body relax auto program. ! progressing to in-depth massage targeting the neck and lower back. 8.Wake Up J " % ! whole body. 9.Sleeping @ cradle alike function.
How to Use 15. Zero Gravity # ) % X ` % X % 16. Manual X " ? ! Swedish, Tapping, Shiatsu, Clapping and Rolling. 17. Direction X " % 18.
How to Use 22.Partial Air X " " ! ! % # " ) " ~ ~ " % ' # " ) " " % 23.
Cleaning and maintenance 1. Cleaning of the synthetic leather Wipe the synthetic leather with a soft dry cloth. Do not clean the product with chemicals such as thinners, gasoline and alcohol. (cleaning cloth) sold on the market, follow its directions for use. !" # $ # #% & & method below. water mild detergent 1 Put a piece of soft cloth into water or 3% to 5% neutral detergent contained hot water and wring it out.
Troubleshooting This page summarizes the most common problems you could encounter with the % " " " ! % If the problem encountered is not listed, please try the following suggestions: 1. Turn off the product and unplug it. 2. Wait for 60 minutes. 3. Plug the product back to the recommended outlet and restart.
Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Chair Specifications Specifications Model No. OS-Pro Omni Rated Voltage 110V~120V Rated Frequency 50/60Hz Rated Power Consumption 220W Timer 5/10/15/20/25/30 minutes Max Time Rate 30 minutes L [%~@**%]~@%[~ ; @ D @ v< > %\~@**%]~@*%[~ Weight Gross Weight: Approx. 264.6 lbs Net Weight: Approx. 216.1 lbs Length of Wire Controller wire: 59.0” Power supply wire: 70.
Publish:2017.08 V1.