User's Manual

Operation Introduction
The Operation Introduction of soft bath massage pillow with wireless remote control:
1.3AAA batteries for hand control, and 4AAA batteries for motor in the bath pillow;
2.The direction to replace the 4AAA batteries in the pillow: Open the battery box according to the
direction printed on the cover. After the batteries are replaced, tighten and close the battery box
well,to keep it waterproof well.
Introductions for use
1. Press the switch of the battery box first. When you hear longer sound, the battery power
is on.
2. Then press the power button on the hand control , you will hear short sound . The motor will
begin to work,and provide vibration massaging;
3. Mode button: 2 modes for choice “waving” or “ normal”
4. Intensity button: 2 speeds for choice
5. Press the power button on the hand control again, The vibration massaging is stopped;
When you won’t use the bath pillow, please press the switch on the battery box
to off the power of batteries in the pillow.
6. If the power of the hand control is off ,and the power of the motor is on, you will hear long
alarm after 1 minute, to remind you to off the power of the motor .
If you don’t off the switch of the battery box, the pillow will come to be on battery-saving
status in 1 minute..
7. When the product is in battery-saving status, the hand control isn’t workable. When you use
the massage bath pillow again, Please switch off the power of the battery box in the pillow
first, and press the switch on the battery box again.The hand control is workable.
8. 15 minutes timer. When the product work continued in 15 minutes, the product will come into
battery-saving status.