Taurus Series Multimedia Player T30 Specifications
Taurus Series Multimedia Player T30 Specifications Change History Document Version Release Date Description V1.0.0 2021-08-31 First release Introduction The T30 is the third generation of multimedia player created by NovaStar for full-color LED displays. This multimedia player integrates playback and sending capabilities, allowing users to publish content and control LED displays with a computer, mobile phone, or tablet.
Appearance All product pictures shown in this document are for illustration purpose only. Actual product may vary. Name Description SIM CARD SIM card slot Capable of preventing users from inserting a SIM card in the wrong orientation RESET Factory reset button Press and hold this button for 5 seconds to reset the product to its factory settings.
Name Description USB The Ext4 and FAT32 file systems are supported. The exFAT and FAT16 file systems are not supported. COM 1 Reserved AUDIO OUT Audio output connector POWER Power input connector RELAY 3-pin relay control switch DC: Maximum voltage and current: 30 V, 3 A AC: Maximum voltage and current: 250 V, 3 A Two connection methods: Common switch: The connection method of pins 2 and 3 is not fixed. Pin 1 is not connected to the wire.
Name CLOUD RUN Color Green Green Status Description Staying on/off The T30 is abnormal. Staying on The T30 is connected to the Internet and the connection is available. Flashing once every 2s The T30 is connected to VNNOX and the connection is available. Flashing once every second No video signal Flashing once every 0.5s The T30 is functioning normally. Staying on/off FPGA loading is abnormal. Dimensions Tolerance: ±0.
Operating Environment Packing Information Temperature –20ºC to +60ºC Humidity 0% RH to 80% RH, non-condensing Dimensions (L×W×H) 278.0 mm × 63.0 mm × 221.0 mm List 1x T30 1x Wi-Fi omnidirectional antenna 1x Power connector 2x IPex cables 1x Quick Start Guide Dimensions (L×W×H) 165.0 mm × 146.4 mm × 21.2 mm System Software Android 11.0 operating system software Android terminal application software FPGA program Note: Third-party applications are not supported.
Category Codec Resolution Maximum Frame Rate HEVC 4096×2304 pixels GOOGLE VP8 VP8 48×48 pixels to 1920×1088 pixels 30fps GOOGLE VP9 VP9 64×64 pixels to 4096×2304 pixels H.263 H.263 SQCIF (128×96) Maximum Bit Rate (Ideal Case) File Format Remarks MOV, TS Tile & Slice 38.4Mbps WEBM, MKV N/A 60fps 80Mbps WEBM, MKV N/A 30fps 38.4Mbps 3GP, MOV, MP4 No support for H.
FCC Caution This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
When the module is installed inside another device, the user manual of this device must contain below warning statements; 1. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, may 2)this device must accept any interference cause undesired operation. received, including interference that 2.
ISED Statement English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 1.1 List of applicable FCC rules FCC Part 15 Subpart C 15.247 & 15.209 1.2 Specific operational use conditions The module is a 2.4G WiFi module. Operation Frequency: 2412-2462MHz Number of Channel: 11 Modulation: DSSS, OFDM Type: Helix Antenna Gain: 5.03 dBi Max. The module can be used for mobile or portable applications with a maximum 5.03dBi antenna.
coupler. As long as the conditions above are met, further transmitter test will not be required. However, the host manufacturer is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). 1.7 Label and compliance information Host product manufacturers need to provide a physical or e-label stating “Contains FCC ID: 2AG8JT60” with their finished product. 1.
