Installation Instructions

ManualsBrandsXi'an Aerospace Automation ManualsElectronicsUHF RFID Eight-channel Industrial Reader

UHF RFID Eight-Channel Industrial Reader

ASAM-FRUH-GD05 Xi’an Aerospace Automation Co., Ltd

Summary

The ASAM-FRUH-GD05 UHF RFID industrial reader with eight-channel is a

high-performance, wide-band and scalable UHF RFID device that complies with the

EPC global C1 Gen2 / ISO 18000-6C protocol standard. The device possesses strong

capability of single and multi-tag reading, RF output power is adjustable, the device

supports RS232, RS485, Ethernet and other communication interfaces, and it

possesses multy features such as relay output control, optocoupler input, power

indication, read status indicator.

Application

ASAM-FRUH-GD05 UHF RFID industrial reader with eight-channel can be used in

production process control, vehicle management, logistics management, warehouse

management, access control and many other applications.

Product characteristics

1.Agreement:Electronic tags conforming to EPC-CLASS1-G2 (ISO18000-6C)

ISO18000-6B standards.

2.Working frequency 902-928MHz/865-868MHz (adjustable according todifferent

countries or regions)

3.Supporting dynamic parameter adjustment (e.g. power adjustment,

frequencyadjustment, etc.)

4.Supporting digital input/output control interface, directly expanding other

equipment

5. Read distance up to 20 meters (related to tag and RF output power)

6. Antenna number：1-8 external antennas, 1-8 external antennas areoptional

7. Supporting Standard Ethernet Port Communication and Serial PortCommunication

8.Supporting multiple working modes (active mode, answer mode)

9 Output power up to 30 dBm (step 0.1 db, adjustable)

10.Working in a broad-spectrum frequency hopping (FHSS) or fixed-frequency

transmission mode

11. Easily install and debug with special UHF configuration software

12. Low power design, DC 12V power supply

Summary of content (4 pages)

PAGE 1
UHF RFID Eight-Channel Industrial Reader ASAM-FRUH-GD05 Xi’an Aerospace Automation Co., Ltd Summary The ASAM-FRUH-GD05 UHF RFID industrial reader with eight-channel is a high-performance, wide-band and scalable UHF RFID device that complies with the EPC global C1 Gen2 / ISO 18000-6C protocol standard.
PAGE 2
13. Protection level: IP54. Technical parameter  Type: ASAM-FRUH-GD05  Transmission frequency: 902MHz-928MHz  Complying with EPCglobal UHF Class1 Gen2/ISO18000-6C standard  Read-write distance: The maximum reading distance can be up to 20 meters.  (related to antenna setting)  Antenna number: 1-8 external antennas, 1-8 external antennas are optional  RF power: 0dBm-30dBm, step 1 dB, adjustable.
PAGE 3
5. Ethernet interface 6. RS232 interface 7. Terminals: Including 4 relay output control interfaces, 2 optocoupler input interfaces, RS485 interface. 8. Trademark 9. External antenna interface 1 10. External antenna interface 2 11. External antenna interface 3 12. External antenna interface 4 13. External antenna interface 5 14. External antenna interface 6 15. External antenna interface 7 16. External antenna interface 8 17.
PAGE 4
FCC WARNING STATEMENT Changes or modific ations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.