User's Manual

(put the chip into coil,
then recognize)
(press any buttons of vehicle
remote to check frequency)
(connect to universal remote PCB board
for remote data generation)
08
4. Customer can use any functions after device
connect to APP successful.
User Manual
Device description
Overview
02 03 04
05 06 07
2.The bluetooth of the cellphone is required
to be turned on
3. Click "search for new device" and
pair the device according to SN
[Start]: press and hold the power button for 1 second
[Shut down]: press and hold the power button for 4 seconds
[Transponder detection]: press the power button for 1 second
[Frequency test]: press and hold the power button for 2 seconds
识别中...
1.Enter the main interface of APP
and click "add device" to connect
Firmware version
Bluetooth status
Battery level
Device SN
Remote generation port
Power button
Display screen
⑦ Charging port
② BLE antenna
③ Detection coil
⑤ Remote
identification area
Scan QR Code to download
Xhorse APP
After connection success,
read vehicle immo transponder
detailed information
Press any buttons of vehicle remote close to
'remote identification area', vehicle remote
mode and type will be shown on APP
Note: The relevant function of
detecting remote-contro is still
under developement and not
available for this device for now.