Design for Life Candy TV User Manual YouTube SEARCH: XFa-DT201AF
CONTENTS 1. Important Notes ------------------------------------------ 01 2. General Specification ----------------------------------- 02 3. Product Appearance ------------------------------------ 03 4. Product Description ------------------------------------- 04 5. Start Up ---------------------------------------------------- 07 6. Main Menu ------------------------------------------------ 08 7. DTV Interface --------------------------------------------- 09 8.
Important Notes: READ BEFORE USE Before using this Candy TV,It is important that you read and follow all instructions carefully in this manual to ensure you own safety and get the best experience of our product. Highly recommended to use a fast charging charger of 18W or above to ensure the best charging experience. It supports a variety of fast charging protocols. Do not place heavy objects on top of the device.Do not place the device in a place exposed directly to sunlight or anywhere with high humidity.
General Specification Frequency:57MHz~803MHz Antenna:Sensitivity ≤-83dBm Antenna Impedance:50Ohm Video Decoder:MPEG-1/2/4 H.264 , VC-1; Audio Decoder:MPEG-1/2 , MP3 , AC-3 , AAC-LC 5.1 , WMA , HE-AAC V1/V2 2.0 , RA8-LBR Battery Capacity:18650×3 (11.1V 2000mAh) Battery :Watch The Video,The Use Time Can Be Up To 2Hours USB Power Delivery Supported: USB Type-C PD3.
Product Appearance 5 D e si gn f or L if e Candy TV User Manual YouT ube SEARCH: XFa-DT 201AF 1. Candy TV 1 PCS 2. Type-C USB cable 1 PCS 3. TV Antenna 1 PCS 4. Remote controller 1 PCS 5.
Product Description 1. Power Button Short press the power button to turn on, wait for approximately 5 seconds for the blankscreen to display the LOGO and subsequently enter to the main menu. During the power-on state, short press the power button once to enter the screen saving state. Press the power button again to resume display. Press and hold the power button for 3 seconds to shut down the device.
Product Description 2. RESET Button Use a pin to press the reset button to reset the device. 3. Volume Button Adjust the volume use the volume +/- buttons. 4. TV Antenna Socket 5. LED LED light is always on indicates charging after power adapter is connected. LED light is off when charging completed. 6. TYPE C Power Interface 7. 3.5mm Earphone Jack 8.
Product Description Turn on/off Screen Function Menu Button Return to the previous menu OK Move up/down to select Volume up/down function when playing DTV/Video/Music; Under the function menu, move left and right to select OK OK confirmation Button DTV Search Button Mute 06
First Start Up 1. It shows Installation Guide Settings when turns on. Return to home page Search DTV Parameters switching 2. Press can return to homepage when it's on the DTV playback interface.
Main Menu 1 4 3 2 5 1. Digital Video Broadcasting 2. Bluetooth Menu 3. Battery indicator: Indicating fully charged. Indicating charging in progress. Please charge it in time when the battery level indicating low. 4. Multimedia Menu (Need to be used with a USB drive) 5.
DTV Interface 1. On DTV playback interface, click the screen and menu will pop up automatically at the bottom of the machine.
DTV Interface 2. Click to enter into DTV manual research.Change frequency stations by and click to play the current stations.Click it can search DTV stations automatically. 3. Click to enter TV List interface.
DTV Interface 4. Click to enter the EPG interface.
Bluetooth Interface 1. On the main menu interface,click Bluetooth to enter the Bluetooth interface.The interface for the first use is as follows: 2. Use your mobile phone to search for Bluetooth XFA-DT201A and connect it. After the connection is successful, it will automatically enter the playback interface.
Bluetooth Interface Return to home page Play / Pause Previous / next Mute Bluetooth paired devices list 3.In the playlist interface,click devices list.
MEDIA Interface 1. Click MEDIA to enter the MEDIA interface. It indicates " NO USB Device" when USB isn't detected and cannot enter into the next interface. 2.
MEDIA Interface 3. On the music playing interface, click playlist menu.
MEDIA Interface MEDIA music format support: Audio Codec File Extension BitRate/ SamplingRate MPEG1 Layer2 MP3 32Kbps ~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) AC3 AC3 32Kbps ~ 640Kbps(Bit rate) 32/44.
MEDIA Interface 4. When preview photos on the preview interface, click to auto slide show all photos. Click the screen, function menus will pop up.
MEDIA Interface 5. When preview videos on the video playing interface. Click to enter full screen display. Click the Screen, function menus will pop up automatically.
MEDIA Interface MEDIA video format support: File Extension Container Video Codec Audio Codec mpg, mpeg, dat MPG, MPEG MPEG1, 2 MP2, MP3, AC3, LPCM ts, trp, tp, m2ts, m2t1 MPEG2-TS, H264-TS MPEG-2, H.264 MP2, MP3, AC3, AAC, HEAAC mp4, mov MPEG2-TS, H264-TS MPEG4 AAC, HEAAC, MP3 mkv Matroska H.264, MPEG-1, 2, 4 MP2, MP3, AC3, AAC, HEAAC avi AVI(1.0, 2.0) MPEG2, MPEG4 MP2, MP3, AC3, AAC, HEAAC flv flv Sorenson H.
SETTING Interface 1. DTV Program setting Click Sort choose the station playlist sort order.Click LCN to confirm this mode on or off. Return to home page Confirm Up/down selection sub-menu Parameters switching 2.
SETTING Interface 3. DTV Channel Search setting 4. DTV Time setting: When Time Offset is set to Auto, the device will automatically use the time and region information from the local radio program. When Time Offset is set to Manual, you may select manually via Time Zone.
SETTING Interface Option for languages setting System setting menu 22
SETTING Interface USB setting 8.Photo Configure sub-menu:(NOTE: This menu list does not support touch mode to switch selection,Please use the cursor keys on the bottom menu bar.
www.xfa-av.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.